bar shower developed a continuous drip from the 1/4 turn flow
valve. Got a tuit so pulled out the old to measure & get a
new.

Oh dear. No online source had the same spec. Nearest was very
close but the splined head of the spindle was 7.6mm, diameter of
my original dud was 9.8mm....

For 7 quid posted I ordered one yesterday & it arrived today (tap
magician, eBay).

So out with the polymorph

https://www.amazon.co.uk/gp/aw/d/B017SA92O4

and ten minutes later I had moulded myself a bush to enable the
smaller replacement spindle to fit snugly & exactly into the the
shower control knob.

All back together & job done! Assuming the shower doesn't get
above 60deg all should be ok :-)

Result IMHO.

--
Jim K


----Android NewsGroup Reader----
http://usenet.sinaapp.com/