Hotpoint wm
 

just replaced the brushes....is it normal for new brushes to "scream"...some
noise ! .... or did I just not notice the noise from the motor before the
repair ..?

Hotpoint wm
 

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from the
motor before the repair ..?


......seeing as I don't do the washing

Hotpoint wm
 

On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.

Hotpoint wm
 

"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.


I think you are smelling your toung again gay boy .....

Hotpoint wm
 

"Jim GM4DHJ ..." wrote in message
...

"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.


I think you are smelling your toung again gay boy .....

tongue scrapper ideal to rmove the **** ......

http://www.ebay.co.uk/itm/Plastic-To...1DiW Bd1Gtj8w

Hotpoint wm
 

"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.


https://www.photobox.co.uk/my/photo?..._id=9450401801

I know....shocking those £1 brand new jackets......

Hotpoint wm
 

On Sat, 17 Dec 2016 15:26:53 -0000, "Jim GM4DHJ ..."
wrote:

just replaced the brushes....is it normal for new brushes to "scream"...some
noise ! .... or did I just not notice the noise from the motor before the
repair ..?


Yes, while there is a small point of contact. They should quieten
down when they bed in, and take on the profile of the commutator,



--

Graham.

%Profound_observation%

Hotpoint wm
 

Jim GM4DHJ ... wrote:
"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise
from the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or
the filthy rags that you wear.


https://www.photobox.co.uk/my/photo?..._id=9450401801

I know....shocking those £1 brand new jackets......

Why are you being silly and trolling Jim?
I sometimes read uk.radio.amateur and thought more of you than this.

Hotpoint wm
 

On Sat, 17 Dec 2016 20:41:38 +0000, Mr Pounder Esquire wrote:

Jim GM4DHJ ... wrote:
"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or
the filthy rags that you wear.


https://www.photobox.co.uk/my/photo?
album_id=4531043917&photo_id=9450401801

I know....shocking those £1 brand new jackets......

Why are you being silly and trolling Jim?
I sometimes read uk.radio.amateur and thought more of you than this.

Then you were mistaken. He's always been a brain-dead, bigoted, jocktard
arsehole.

Hotpoint wm
 

On Sat, 17 Dec 2016 22:21:18 -0000, Mike Tomlinson wrote:

On Sat, 17 Dec 2016 20:41:38 +0000, Mr Pounder Esquire wrote:

Jim GM4DHJ ... wrote:
"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or
the filthy rags that you wear.


https://www.photobox.co.uk/my/photo?
album_id=4531043917&photo_id=9450401801

I know....shocking those £1 brand new jackets......

Why are you being silly and trolling Jim?
I sometimes read uk.radio.amateur and thought more of you than this.

Then you were mistaken. He's always been a brain-dead, bigoted, jocktard
arsehole.

What's wrong with being bigoted?

--
The problem with today's society is adults are treated like children, children are treated like retards, and retards are exempt from the law.

Hotpoint wm
 

"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 20:41:38 +0000, Mr Pounder Esquire wrote:

Jim GM4DHJ ... wrote:
"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or
the filthy rags that you wear.


https://www.photobox.co.uk/my/photo?
album_id=4531043917&photo_id=9450401801

I know....shocking those £1 brand new jackets......

Why are you being silly and trolling Jim?
I sometimes read uk.radio.amateur and thought more of you than this.

Then you were mistaken. He's always been a brain-dead, bigoted, jocktard
arsehole.

that is why Mr Pounder...tee hee

Hotpoint wm
 

"James Wilkinson Sword" wrote in message
...
On Sat, 17 Dec 2016 22:21:18 -0000, Mike Tomlinson wrote:

On Sat, 17 Dec 2016 20:41:38 +0000, Mr Pounder Esquire wrote:

Jim GM4DHJ ... wrote:
"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or
the filthy rags that you wear.


https://www.photobox.co.uk/my/photo?
album_id=4531043917&photo_id=9450401801

I know....shocking those £1 brand new jackets......

Why are you being silly and trolling Jim?
I sometimes read uk.radio.amateur and thought more of you than this.

Then you were mistaken. He's always been a brain-dead, bigoted, jocktard
arsehole.

What's wrong with being bigoted?

nothing that I can see.........

Hotpoint wm
 

"Graham." wrote in message
...
On Sat, 17 Dec 2016 15:26:53 -0000, "Jim GM4DHJ ..."
wrote:

just replaced the brushes....is it normal for new brushes to
"scream"...some
noise ! .... or did I just not notice the noise from the motor before the
repair ..?


Yes, while there is a small point of contact. They should quieten
down when they bed in, and take on the profile of the commutator,



thanks...thought that might be the case....the brushes were a distress
purchase at a shop in Glasgow...pattern parts £20.....when I checked later I
could have got the genuine part on ebait delivered for £9.95.......that is
why I have two cars so I can take my time sourcing parts at a good price
when one breaks down....but you can't have two washing machines.....

Hotpoint wm
 

"Jim GM4DHJ ..." wrote in message
...

"Graham." wrote in message
...
On Sat, 17 Dec 2016 15:26:53 -0000, "Jim GM4DHJ ..."
wrote:

just replaced the brushes....is it normal for new brushes to
"scream"...some
noise ! .... or did I just not notice the noise from the motor before the
repair ..?


Yes, while there is a small point of contact. They should quieten
down when they bed in, and take on the profile of the commutator,



thanks...thought that might be the case....the brushes were a distress
purchase at a shop in Glasgow...pattern parts £20.....when I checked later
I could have got the genuine part on ebait delivered for £9.95.......that
is why I have two cars so I can take my time sourcing parts at a good
price when one breaks down....but you can't have two washing machines.....

You can actually. And I have 3 dishwashers too.

Hotpoint wm
 

"Rod Speed" wrote in message
...


"Jim GM4DHJ ..." wrote in message
...

"Graham." wrote in message
...
On Sat, 17 Dec 2016 15:26:53 -0000, "Jim GM4DHJ ..."
wrote:

just replaced the brushes....is it normal for new brushes to
"scream"...some
noise ! .... or did I just not notice the noise from the motor before
the
repair ..?


Yes, while there is a small point of contact. They should quieten
down when they bed in, and take on the profile of the commutator,



thanks...thought that might be the case....the brushes were a distress
purchase at a shop in Glasgow...pattern parts £20.....when I checked
later I could have got the genuine part on ebait delivered for
£9.95.......that is why I have two cars so I can take my time sourcing
parts at a good price when one breaks down....but you can't have two
washing machines.....

You can actually. And I have 3 dishwashers too.
white goods one up-manship...tee hee...makes a change from cars and
computers......

Hotpoint wm
 

En el artículo , some sad gimp with
no life pretending to be me escribió:

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.

This is the real Mike Tomlinson here. The above is a forgery posted
through Aioe.org, which I don't use.

--
(\_/)
(='.'=) systemd: the Linux version of Windows 10
(")_(")

Hotpoint wm
 

En el artículo , a sad gimp
escribió:

Then you were mistaken. He's always been a brain-dead, bigoted, jocktard
arsehole.

again, not me.

--
(\_/)
(='.'=) systemd: the Linux version of Windows 10
(")_(")

Hotpoint wm
 

"Jim GM4DHJ ..." wrote in message
...

"Rod Speed" wrote in message
...


"Jim GM4DHJ ..." wrote in message
...

"Graham." wrote in message
...
On Sat, 17 Dec 2016 15:26:53 -0000, "Jim GM4DHJ ..."
wrote:

just replaced the brushes....is it normal for new brushes to
"scream"...some
noise ! .... or did I just not notice the noise from the motor before
the
repair ..?


Yes, while there is a small point of contact. They should quieten
down when they bed in, and take on the profile of the commutator,



thanks...thought that might be the case....the brushes were a distress
purchase at a shop in Glasgow...pattern parts £20.....when I checked
later I could have got the genuine part on ebait delivered for
£9.95.......that is why I have two cars so I can take my time sourcing
parts at a good price when one breaks down....but you can't have two
washing machines.....

You can actually. And I have 3 dishwashers too.

white goods one up-manship...tee hee...

Nope, I've had enough of a clue to get cheap
ones from garage/yard sales when the original
one of each that I bought new had problems
with the dishwashers. I inherited the second
washing machine and kept it as a spare until
the original washing machine developed a
problem that I havent even bothered to look at.

Hotpoint wm
 

"Rod Speed" wrote in message
...


"Jim GM4DHJ ..." wrote in message
...

"Rod Speed" wrote in message
...


"Jim GM4DHJ ..." wrote in message
...

"Graham." wrote in message
...
On Sat, 17 Dec 2016 15:26:53 -0000, "Jim GM4DHJ ..."
wrote:

just replaced the brushes....is it normal for new brushes to
"scream"...some
noise ! .... or did I just not notice the noise from the motor before
the
repair ..?


Yes, while there is a small point of contact. They should quieten
down when they bed in, and take on the profile of the commutator,



thanks...thought that might be the case....the brushes were a distress
purchase at a shop in Glasgow...pattern parts £20.....when I checked
later I could have got the genuine part on ebait delivered for
£9.95.......that is why I have two cars so I can take my time sourcing
parts at a good price when one breaks down....but you can't have two
washing machines.....

You can actually. And I have 3 dishwashers too.

white goods one up-manship...tee hee...


Nope, I've had enough of a clue to get cheap
ones from garage/yard sales when the original
one of each that I bought new had problems
with the dishwashers. I inherited the second
washing machine and kept it as a spare until
the original washing machine developed a
problem that I havent even bothered to look at.


you are my kind of guy ! ..................

I did that recently with bread makers made two out of three ....that is why
I have more money than I know what to do with ......(that was just to annoy
brian reay) ....

Hotpoint wm
 

"Mike Tomlinson" wrote in message
...
En el artículo , some sad gimp with
no life pretending to be me escribió:

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.

This is the real Mike Tomlinson here. The above is a forgery posted
through Aioe.org, which I don't use.

who cares it sounded like you......

Hotpoint wm
 

Instead of a four slice toaster, I have two two-slice toasters so a failiure dosn't leave me toastless

Hotpoint wm
 

"Graham." wrote in message
...
Instead of a four slice toaster, I have two two-slice toasters so a
failiure dosn't leave me toastless

bet that really annoys you though ....

Hotpoint wm
 

Might be that the commutator is also quite worn by the brushes sparking.
Might go away, might just die.
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!
"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from the
motor before the repair ..?

Hotpoint wm
 

Has everyone on here had a liquid lunch today or what?
Brian

--
----- -
This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please!
"Jim GM4DHJ ..." wrote in message
...

"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.


I think you are smelling your toung again gay boy .....

Hotpoint wm
 

"Brian Gaff" wrote in message
...
Might be that the commutator is also quite worn by the brushes sparking.
Might go away, might just die.
Brian

could be...... I gave it a clean with switch cleaner...probably shouldn't
have .......

Hotpoint wm
 

"Brian Gaff" wrote in message
...
Has everyone on here had a liquid lunch today or what?
Brian


I don't drink..........wouldn't do my new liver much good ....

Hotpoint wm
 

Brian Gaff wrote

Has everyone on here had a liquid lunch today or what?

What.

"Jim GM4DHJ ..." wrote in message
...

"Mike Tomlinson" wrote in message
...
On Sat, 17 Dec 2016 15:39:39 +0000, Jim GM4DHJ ... wrote:

"Jim GM4DHJ ..." wrote in message
...
just replaced the brushes....is it normal for new brushes to
"scream"...some noise ! .... or did I just not notice the noise from
the motor before the repair ..?


.....seeing as I don't do the washing

Steam cleaning wouldn't be enough to remove the stench from you, or the
filthy rags that you wear.


I think you are smelling your toung again gay boy .....

Hotpoint wm
 

James Stewart wrote
Brian Gaff wrote

Has everyone on here had a liquid lunch today or what?

I don't drink..........

Bet you do............

wouldn't do my new liver much good ....

Do it even less good not drinking anything at all, ever ....

Hotpoint wm
 

"Rod Speed" wrote in message
...
James Stewart wrote
Brian Gaff wrote

Has everyone on here had a liquid lunch today or what?

I don't drink..........

Bet you do............

wouldn't do my new liver much good ....

Do it even less good not drinking anything at all, ever ....


problem is for years I have never been thirsty and can get dehydrated
without realizing it ......