I have some 12mm U section 2mm thick EPDM rubber channel which I want to
glue to the edge of 12mm plywood for protection and buffering.

I see large tins of EPDM roofing adhesive, but I don't really want that
much. What will work? Silicone doesn't and neither does 'No more!
Nails!' or 'No! More nails!'

Cheers
--
Syd

Syd Rumpo wrote:

I have some 12mm U section 2mm thick EPDM rubber channel which I want to
glue to the edge of 12mm plywood for protection and buffering.

I see large tins of EPDM roofing adhesive, but I don't really want that
much. What will work?

good old glue-sniffers evostik ...

On 27/09/2016 23:10, Andy Burns wrote:
Syd Rumpo wrote:

I have some 12mm U section 2mm thick EPDM rubber channel which I want to
glue to the edge of 12mm plywood for protection and buffering.

I see large tins of EPDM roofing adhesive, but I don't really want that
much. What will work?

good old glue-sniffers evostik ...


Thanks, is that the 'Multi-Purpose Impact' adhesive? I did wonder if it
had been changed because I don't remember it being called that in olden
days of yore.

Cheers
--
Syd

On Tue, 27 Sep 2016 23:15:41 +0100, Syd Rumpo
wrote:

On 27/09/2016 23:10, Andy Burns wrote:
Syd Rumpo wrote:

I have some 12mm U section 2mm thick EPDM rubber channel which I want to
glue to the edge of 12mm plywood for protection and buffering.

I see large tins of EPDM roofing adhesive, but I don't really want that
much. What will work?

good old glue-sniffers evostik ...


Thanks, is that the 'Multi-Purpose Impact' adhesive? I did wonder if it
had been changed because I don't remember it being called that in olden
days of yore.

I'm not sure you will want an impact adhesive (or to be using it in
that way) as that's designed for you to apply a coat of adhesive on
both surfaces, allow to dry and then bring them together, where they
glue_on_impact. Not sure that's what you would want when trying to put
an edging on a board.

Even this stuff that looks quite industrial and will glue 'rubber' to
wood, doesn't work with EPDM (according to the Q&A):

http://www.screwfix.com/p/evo-stik-5...ails_container

I think this sort of stuff is suitable for EPDM though and available
in smaller sizes:

http://www.glueonline.co.uk/shop/TA4605_TDS.pdf

http://www.permabond.co.uk/structural-acrylics-cfgx

http://www.permabond.com/2015/05/12/...rial-adhesive/

Or this possibly?:

http://www.the-roof-shop.co.uk/epage.../cbwatercutoff

Cheers, T i m

On 28/09/2016 08:55, T i m wrote:
On Tue, 27 Sep 2016 23:15:41 +0100, Syd Rumpo
wrote:

On 27/09/2016 23:10, Andy Burns wrote:
Syd Rumpo wrote:

I have some 12mm U section 2mm thick EPDM rubber channel which I want to
glue to the edge of 12mm plywood for protection and buffering.

I see large tins of EPDM roofing adhesive, but I don't really want that
much. What will work?

good old glue-sniffers evostik ...


Thanks, is that the 'Multi-Purpose Impact' adhesive? I did wonder if it
had been changed because I don't remember it being called that in olden
days of yore.

I'm not sure you will want an impact adhesive (or to be using it in
that way) as that's designed for you to apply a coat of adhesive on
both surfaces, allow to dry and then bring them together, where they
glue_on_impact. Not sure that's what you would want when trying to put
an edging on a board.

Even this stuff that looks quite industrial and will glue 'rubber' to
wood, doesn't work with EPDM (according to the Q&A):

http://www.screwfix.com/p/evo-stik-5...ails_container

I think this sort of stuff is suitable for EPDM though and available
in smaller sizes:

http://www.glueonline.co.uk/shop/TA4605_TDS.pdf

http://www.permabond.co.uk/structural-acrylics-cfgx

http://www.permabond.com/2015/05/12/...rial-adhesive/

Or this possibly?:

http://www.the-roof-shop.co.uk/epage.../cbwatercutoff

Cheers, T i m

Thanks for that, trickier than I'd thought.

Cheers
--
Syd

T i m wrote:

Syd Rumpo wrote:

Andy Burns wrote:

good old glue-sniffers evostik ...

Thanks, is that the 'Multi-Purpose Impact' adhesive? I did wonder if it
had been changed because I don't remember it being called that in olden
days of yore.

yes now known as impact, or contact adhesive.

I'm not sure you will want an impact adhesive (or to be using it in
that way) as that's designed for you to apply a coat of adhesive on
both surfaces, allow to dry and then bring them together, where they
glue_on_impact. Not sure that's what you would want when trying to put
an edging on a board.

you can either coat both sides and let dry, then bring them together for
an impact fix, or you can coat one side,don't let it dry, and bring them
together, re-positionable then *clamp* for a slower fix.

Even this stuff that looks quite industrial and will glue 'rubber' to
wood, doesn't work with EPDM (according to the Q&A):

I've got some offcuts of EPDM in the garage, will try gluing some this
evening ...