 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Metal bar tolerances
I need a longer steel bar to fit an existing slot, measured the existing
bar that fits the slot with a vernier calliper at 13.0x3.0mm Ordered a length of 13x3mm stainless flat bar, only to find when it arrived it is 13.8x3.0mm, which doesn't fit the slot, is that within normal tolerances for metal stock? I don't want to widen the slot. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| SU7 and tolerances | Woodworking | |||
| Taper tolerances | Metalworking | |||
| Taper tolerances | Metalworking | |||
| TS setup tolerances | Woodworking | |||
| Starrett tolerances | Metalworking | |||
![Andy Burns[_12_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
