 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
source for aluminium sections/parts to build a verandah
Seen these "installed" for vast sums.
Appears to be just toughened single glazing and standard ali sections powder coated & bolted together? Anyone done one? Or any pointers to the sources of suitable ali components? Posts, beams, rafters, spandrel brackets, er anything else? TIA Jim K |
|
#2
Posted to uk.d-i-y
|
|||
|
|||
|
source for aluminium sections/parts to build a verandah
JimK wrote:
Seen these "installed" for vast sums. Appears to be just toughened single glazing and standard ali sections powder coated & bolted together? Anyone done one? Or any pointers to the sources of suitable ali components? Posts, beams, rafters, spandrel brackets, er anything else? I bought some 2" powder coated ally box section lengths a couple of years ago. 4 metre lengths were around £60. They were used for the uprights/crossmembers, galvanised brackets, inside the box section were used for bolting them together. Aluminium stockholders are the place to try. Start he http://www.hillfootmultimetals.com/aluminium -- Alan To reply by mail, change '+' to 'plus' |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Source for aluminium 'heat sink' cases - U section | UK diy | |||
| Self build "pull out larder" solution - source for parts ? | UK diy | |||
| Hard disks as a source of aluminium for casting? | Metalworking | |||
| How to build a Basic FM transmitter with spare parts available at home | Electronics Repair | |||
| Source for Aluminium Bronze | Metalworking | |||
![JimK[_3_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Linear Mode
