|
John Lewis mash m/c - any good?
Our old washing machine seems to be destined for the great spin cycle in
the sky[1] so new one time. John Lewis have their own brand JLWM1200 for £230[2] but it seems to be made by Zanussi to JL's spec[3]. I thought Zanussi were generally reckoned to be crap. Does the fact John Lewis use them make them OK or make John Lewis crap? [1] house RCD cut out last weekend. Magic smell seemed to be escaping from machine. Investigation revealed no obvious damage on PCB but motor brushes down to nothing. eBayed some more & put them in today. RCD clicked straight off again. Don't think I can justify shelling out on new PCB or professional repair on ancient machine (Bosch Maxx WFL2260). [2] http://www.johnlewis.com/john-lewis-...hine-6kg-load- a-energy-rating-1200rpm-spin-white/p230604487 [3] http://www.washerhelp.co.uk/reviews/...03-review.html -- John Stumbles Science is God's way of telling you He doesn't exist. |
John Lewis mash m/c - any good?
On 25/06/14 21:38, John Stumbles wrote:
Our old washing machine seems to be destined for the great spin cycle in the sky[1] so new one time. John Lewis have their own brand JLWM1200 for £230[2] but it seems to be made by Zanussi to JL's spec[3]. I thought Zanussi were generally reckoned to be crap. Does the fact John Lewis use them make them OK or make John Lewis crap? [1] house RCD cut out last weekend. Magic smell seemed to be escaping from machine. Investigation revealed no obvious damage on PCB but motor brushes down to nothing. eBayed some more & put them in today. RCD clicked straight off again. Don't think I can justify shelling out on new PCB or professional repair on ancient machine (Bosch Maxx WFL2260). new motor is sub £100 usually. I had this. Internal motor short to earth. [2] http://www.johnlewis.com/john-lewis-...hine-6kg-load- a-energy-rating-1200rpm-spin-white/p230604487 [3] http://www.washerhelp.co.uk/reviews/...03-review.html Get a miele or fix what you have -- Ineptocracy (in-ep-toc-ra-cy) €“ a system of government where the least capable to lead are elected by the least capable of producing, and where the members of society least likely to sustain themselves or succeed, are rewarded with goods and services paid for by the confiscated wealth of a diminishing number of producers. |
John Lewis mash m/c - any good?
In article ,
John Stumbles writes: [1] house RCD cut out last weekend. Magic smell seemed to be escaping from machine. Investigation revealed no obvious damage on PCB but motor brushes down to nothing. eBayed some more & put them in today. RCD clicked straight off again. Don't think I can justify shelling out on new PCB or professional repair on ancient machine (Bosch Maxx WFL2260). May need to use an air duster to blow brush dust off the insulators holding the brushes, or wipe them clean if accessible. New washing machine life has apparenly halved over last 10 years. Changes in wash cycle to meet EU regs also wears clothes much faster. You may well regret getting rid of an older machine which might have been repairable, and ending up with a new one with limited life and not servicable and clothes wearing out faster. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
John Lewis mash m/c - any good?
On Wednesday, June 25, 2014 10:08:57 PM UTC+1, Andrew Gabriel wrote:
Changes in wash cycle to meet EU regs also wears clothes much faster. I am reduced to pouring in kettles of water through the detergent drawer to get my eco washing machine to use enough water. I like to see my clothes splashing through the Surf. Haven't found anything that washes as well as a twin-tub with the proviso you need a room with a floor drain to deal with the splashes. Owain |
John Lewis mash m/c - any good?
|
John Lewis mash m/c - any good?
|
John Lewis mash m/c - any good?
In article ,
EricP writes: On Wed, 25 Jun 2014 14:11:40 -0700 (PDT), wrote: On Wednesday, June 25, 2014 10:08:57 PM UTC+1, Andrew Gabriel wrote: Changes in wash cycle to meet EU regs also wears clothes much faster. I am reduced to pouring in kettles of water through the detergent drawer to get my eco washing machine to use enough water. I like to see my clothes splashing through the Surf. So I am not the only nutter that creeps into the kitchen to do this arcane activity then. :) +1 I kept my 1980's Hotpoint microprofile machine going as long as possible. I bought it through GEC staff sales and talked with the Hotpoint engineers who designed it (Hotpoint was also GEC back then - it's just a name now used by Merloni/Indesit). The standard wash cycle was designed to gently lift the clothes out and drop them back into the water repeatedly, to wash the detergent (and rinse water) through them. Variations for different fabrics would change the level so as not to lift the clothes so far, right up to the hand-wash wool program which filled far enough to never lift the clothes out and just slowly agitate them. I used this to wash my dry-clean-only wollen suit trousers many times, without causing any damage. Today's machines are only allowed to use enough water to dampen the clothes, and then rely on rubbing them together to do the cleaning, i.e. back to the wash-board. Parts such as drum bearings are no longer replacable - the drums are solvent or heat welded shut, and the inner drums can't be removed. The machine is designed to be replaced when things like drum bearings wear out. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
John Lewis mash m/c - any good?
On Wednesday, June 25, 2014 9:38:34 PM UTC+1, John Stumbles wrote:
Our old washing machine seems to be destined for the great spin cycle in the sky[1] so new one time. John Lewis have their own brand JLWM1200 for £230[2] but it seems to be made by Zanussi to JL's spec[3]. I thought Zanussi were generally reckoned to be crap. Does the fact John Lewis use them make them OK or make John Lewis crap? [1] house RCD cut out last weekend. Magic smell seemed to be escaping from machine. Investigation revealed no obvious damage on PCB but motor brushes down to nothing. eBayed some more & put them in today. RCD clicked straight off again. Don't think I can justify shelling out on new PCB or professional repair on ancient machine (Bosch Maxx WFL2260). [2] http://www.johnlewis.com/john-lewis-...hine-6kg-load- a-energy-rating-1200rpm-spin-white/p230604487 [3] http://www.washerhelp.co.uk/reviews/...03-review.html I'd prefer to fix the Bosch. When brushes wear out they splatter carbon dust all over, this is the most likely cause of the rcd trip. Running the motor through the washing machine is an easy way to get most of it off. Spare used parts arent expensive when you can find them. NT |
John Lewis mash m/c - any good?
En el artículo ,
escribió: Running the motor through the washing machine is an easy way to get most of it off. I hope you meant the dishwasher. https://www.youtube.com/watch?v=8_jLpd-_gdY&feature=kp Wouldn't that wash the grease out of the bearings? -- (\_/) (='.'=) (")_(") |
John Lewis mash m/c - any good?
"Andrew Gabriel" wrote in message ... In article , John Stumbles writes: [1] house RCD cut out last weekend. Magic smell seemed to be escaping from machine. Investigation revealed no obvious damage on PCB but motor brushes down to nothing. eBayed some more & put them in today. RCD clicked straight off again. Don't think I can justify shelling out on new PCB or professional repair on ancient machine (Bosch Maxx WFL2260). May need to use an air duster to blow brush dust off the insulators holding the brushes, or wipe them clean if accessible. New washing machine life has apparenly halved over last 10 years. Changes in wash cycle to meet EU regs also wears clothes much faster. You may well regret getting rid of an older machine which might have been repairable, and ending up with a new one with limited life and not servicable and clothes wearing out faster. Reduced water level = increased mechanical action = more wear on clothes. I have a Miele. Lasted over 20 years so far. Zero repairs. Touch wood. Dunno if the new ones are as good. |
John Lewis mash m/c - any good?
"Jabba" wrote in message dhosting.com... scribbled... On Wednesday, June 25, 2014 10:08:57 PM UTC+1, Andrew Gabriel wrote: Changes in wash cycle to meet EU regs also wears clothes much faster. I am reduced to pouring in kettles of water through the detergent drawer to get my eco washing machine to use enough water. I like to see my clothes splashing through the Surf. I often rinse the washing first, to ensure it's all wet. Overfill too, so the clothes are not rubbing against each other. Dunno if it works ! Water levels can be ajusted by fiddling with the pressure switches. |
John Lewis mash m/c - any good?
"Andrew Gabriel" wrote in message ... In article , EricP writes: On Wed, 25 Jun 2014 14:11:40 -0700 (PDT), wrote: On Wednesday, June 25, 2014 10:08:57 PM UTC+1, Andrew Gabriel wrote: Changes in wash cycle to meet EU regs also wears clothes much faster. I am reduced to pouring in kettles of water through the detergent drawer to get my eco washing machine to use enough water. I like to see my clothes splashing through the Surf. So I am not the only nutter that creeps into the kitchen to do this arcane activity then. :) +1 I kept my 1980's Hotpoint microprofile machine going as long as possible. I bought it through GEC staff sales and talked with the Hotpoint engineers who designed it (Hotpoint was also GEC back then - it's just a name now used by Merloni/Indesit). The standard wash cycle was designed to gently lift the clothes out and drop them back into the water repeatedly, to wash the detergent (and rinse water) through them. Variations for different fabrics would change the level so as not to lift the clothes so far, right up to the hand-wash wool program which filled far enough to never lift the clothes out and just slowly agitate them. I used this to wash my dry-clean-only wollen suit trousers many times, without causing any damage. Today's machines are only allowed to use enough water to dampen the clothes, and then rely on rubbing them together to do the cleaning, i.e. back to the wash-board. Parts such as drum bearings are no longer replacable - the drums are solvent or heat welded shut, and the inner drums can't be removed. The machine is designed to be replaced when things like drum bearings wear out. Hmm. Interesting. I used to repair automatic washing machines thirty odd years ago. Some of them, it wasn't neccesary to open up the outer drum, the bearing was replaced from outside. But the earliest mass produced ones (Hoover, £100) were ****. They were put out long before properly developed. The range of fault was small but there were lots of them. Main bearing was one of them. About four/five hours work to replace. It had however a bomb proof induction motor. |
John Lewis mash m/c - any good?
On Thursday, June 26, 2014 3:45:31 AM UTC+1, Mike Tomlinson wrote:
En el art�culo , escribi�: Running the motor through the washing machine is an easy way to get most of it off. I hope you meant the dishwasher. er, yes :) Wy do I do so many typos. https://www.youtube.com/watch?v=8_jLpd-_gdY&feature=kp Wouldn't that wash the grease out of the bearings? Wuold enough detergent get into them to do that? My current machine's had its motor dishwashed and is fine. NT |
John Lewis mash m/c - any good?
wrote
Mike Tomlinson wrote wrote Running the motor through the washing machine is an easy way to get most of it off. I hope you meant the dishwasher. er, yes :) Wy do I do so many typos. That's just the Alzheimer's, nothing to worry about. https://www.youtube.com/watch?v=8_jLpd-_gdY&feature=kp Wouldn't that wash the grease out of the bearings? Wuold enough detergent get into them to do that? My current machine's had its motor dishwashed and is fine. |
John Lewis mash m/c - any good?
On Thursday, June 26, 2014 12:02:32 PM UTC+1, Rod Speed wrote:
wrote Mike Tomlinson wrote wrote Running the motor through the washing machine is an easy way to get most of it off. I hope you meant the dishwasher. er, yes :) Wy do I do so many typos. That's just the Alzheimer's, nothing to worry about. Oldtimer's is one disease I'd hate to have. NT |
John Lewis mash m/c - any good?
On Wed, 25 Jun 2014 21:53:41 +0100, The Natural Philosopher wrote:
new motor is sub £100 usually. I had this. Internal motor short to earth. That's what it's turned out to be. Less than 10ohms armature to frame -- John Stumbles Thank God I'm an atheist |
John Lewis mash m/c - any good?
On Wednesday, June 25, 2014 9:38:34 PM UTC+1, John Stumbles wrote:
Our old washing machine seems to be destined for the great spin cycle in the sky[1] so new one time. John Lewis have their own brand JLWM1200 for £230[2] but it seems to be made by Zanussi to JL's spec[3]. I thought Zanussi were generally reckoned to be crap. Does the fact John Lewis use them make them OK or make John Lewis crap? We've had one - or at least a very similar model (looks the same but has a digital countdown timer) - for around 8 years now and have found it superb. It feels very well built and the only time it let us down was with a weeping inlet valve. We live in a very hard water area and such a fault is not at all uncommon. Finding a replacement valve was easy, as was fitting. Mathew |
John Lewis mash m/c - any good?
On Thursday, June 26, 2014 3:59:11 PM UTC+1, John Stumbles wrote:
On Wed, 25 Jun 2014 21:53:41 +0100, The Natural Philosopher wrote: new motor is sub £100 usually. I had this. Internal motor short to earth. That's what it's turned out to be. Less than 10ohms armature to frame You removed every trace of carbon first? NT |
John Lewis mash m/c - any good?
wrote
Rod Speed wrote wrote Mike Tomlinson wrote wrote Running the motor through the washing machine is an easy way to get most of it off. I hope you meant the dishwasher. er, yes :) Wy do I do so many typos. That's just the Alzheimer's, nothing to worry about. Oldtimer's is one disease I'd hate to have. The good thing about it is that by the time you get it, you don't notice. |
John Lewis mash m/c - any good?
On Thursday, June 26, 2014 7:25:40 PM UTC+1, wrote:
On Thursday, June 26, 2014 3:59:11 PM UTC+1, John Stumbles wrote: On Wed, 25 Jun 2014 21:53:41 +0100, The Natural Philosopher wrote: new motor is sub £100 usually. I had this. Internal motor short to earth. That's what it's turned out to be. Less than 10ohms armature to frame You removed every trace of carbon first? iirc the wfl2260 motor is bolted to plastic, so a live motor case doesnt matter much - if the tacho isnt case connected. If so, and carbon cleanup doesnt do it, just remove motor earth & fit a caution notice. NT |
John Lewis mash m/c - any good?
|
John Lewis mash m/c - any good?
In article , EricP
writes So I am not the only nutter that creeps into the kitchen to do this arcane activity then. :) Me too, especially for things like bed linen and towels that soak up a lot of water. -- (\_/) (='.'=) (")_(") |
John Lewis mash m/c - any good?
On 25 Jun 2014 20:38:34 GMT, John Stumbles
wrote: Our old washing machine seems to be destined for the great spin cycle in the sky[1] so new one time. John Lewis have their own brand JLWM1200 for £230[2] but it seems to be made by Zanussi to JL's spec[3]. I thought Zanussi were generally reckoned to be crap. Does the fact John Lewis use them make them OK or make John Lewis crap? I can't answer the question but is 6kg capacity adequate? (Just changed an old (10 year plus) Bosch 6kg for a Bosch 8kg. And check out ao.com, good for prices and next day deliveries.) |
| All times are GMT +1. The time now is 02:32 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter