On Monday, December 1, 2003 10:38:15 AM UTC, Roger Mills wrote:
"Fiona Reid" wrote in message
news
Can anyone suggest a method for connecting a garden hose to
a shower hose?

I have traditional style mixer taps with a shower hose attached
see - http://www.screwfix.com/app/sfd/cat/...68113&id=15524
and I would like to connect a garden hose either to the shower output
part of the tap or to the shower hose itself.

Can anyone suggest the fittings to use? - the standard fittings
in the shed garden centres don't seem to do the job.

Many thanks.

Fiona



Not really a problem. A standard shower hose uses 1/2" BSP threads. A
standard outside tap - to which you would normally attach a garden hose -
has 3/4" BSP threads on its output - but some have 5/8" BSP or even 1/2" BSP
threads.

If you buy a hose/tap connector (Hozelock, Gardena or whatever) from a
hardware shop or garden centre, it will be designed to screw onto a 3/4"
tap. BUT it will probably also be provided with 5/8" and 1/2" adaptors. If
you can get one with a 1/2" adaptor, this will screw straight onto your
shower fitting in place of the existing shower hose. [If it doesn't come
with an adaptor, you will need to buy a brass 3/4"BSP to 1/2"BSP reducer
from a plumbers merchant - but you may have more difficulty getting it to
seal on the shower fitting because it won't have rubber washers like the
plastic adaptor would.

Incidentally, the mind boggles as to why you want to extend your shower into
the garden!

Roger

What he said, 1/2" BSP, no problems.

However, note the hose isn't designed to take hot water, it will soften and will split
or the connectors will be liable to come apart if there's much back pressure
(finger over the end, kids spraying each other).

Keep the water temperature as low as possible and avoid any spray type thing that can shut
the flow off completely, even if only in rotating the jets.

On 20 Jun 2014, Onetap grunted:

On Monday, December 1, 2003 10:38:15 AM UTC, Roger Mills wrote:
"Fiona Reid" wrote in message
news
Can anyone suggest a method for connecting a garden hose to
a shower hose?

Not really a problem. A standard shower hose uses 1/2" BSP threads. A
standard outside tap - to which you would normally attach a garden
hose - has 3/4" BSP threads on its output - but some have 5/8" BSP or
even 1/2" BSP threads.

Incidentally, the mind boggles as to why you want to extend your
shower into the garden!

As the owner of a Labrador Retriever I'll take a wild guess...!

What he said, 1/2" BSP, no problems.

However, note the hose isn't designed to take hot water, it will
soften and will split

A quick look on ebay throws up a proper 4m shower hose:
http://www.ebay.co.uk/itm/251227250860

....and you could use two back-to-back with an adapter:
http://www.ebay.co.uk/itm/261491595941

--
David

On Saturday, 21 June 2014 10:01:08 UTC+1, Lobster wrote:
On 20 Jun 2014, Onetap grunted:



On Monday, December 1, 2003 10:38:15 AM UTC, Roger Mills wrote:

"Fiona Reid" wrote in message

news

Can anyone suggest a method for connecting a garden hose to

a shower hose?



Not really a problem. A standard shower hose uses 1/2" BSP threads. A

standard outside tap - to which you would normally attach a garden

hose - has 3/4" BSP threads on its output - but some have 5/8" BSP or

even 1/2" BSP threads.



Incidentally, the mind boggles as to why you want to extend your

shower into the garden!



As the owner of a Labrador Retriever I'll take a wild guess...!



What he said, 1/2" BSP, no problems.



However, note the hose isn't designed to take hot water, it will

soften and will split



A quick look on ebay throws up a proper 4m shower hose:

http://www.ebay.co.uk/itm/251227250860



...and you could use two back-to-back with an adapter:

http://www.ebay.co.uk/itm/261491595941

11 odd quid? ouch!

I prefer

ebay 110763298338
£2.19 posted :)

Ah the wonder of the interweb and an open mind....


Jim K