Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
how do l recommision a drained down direct 210L unvented tribune waterheater cylinder
Hi
l just bought an empty flat, where the water was turned off and the water heater cylinder was drained down and the electric turned off too ive turned the electric on but when l turned the water on the direct unvented water heater ( a tribune range he ) does not fill then the water comes out of the overflow ( tundish ) until l turn the water off at the main. as soon as l turn the water off /the water supply to the taps and shower and toilet stop too/ hence l think the cylinder isn't filling ! is there anything that l should be doing once the water has been turned off and the system drained please, so l can refill the cylinder safely/ all the taps around the flat work ok when the water is turned on l havn't tried to switch the 2 immersions on at all l need help please to get the system running safely please /re commisioning a drained down system |
#2
Posted to uk.d-i-y
|
|||
|
|||
how do l recommision a drained down direct 210L unvented tribune waterheater cylinder
In message , peterpeter
writes Hi l just bought an empty flat, where the water was turned off and the water heater cylinder was drained down and the electric turned off too ive turned the electric on but when l turned the water on the direct unvented water heater ( a tribune range he ) does not fill then the water comes out of the overflow ( tundish ) until l turn the water off at the main. as soon as l turn the water off /the water supply to the taps and shower and toilet stop too/ hence l think the cylinder isn't filling ! is there anything that l should be doing once the water has been turned off and the system drained please, so l can refill the cylinder safely/ all the taps around the flat work ok when the water is turned on l havn't tried to switch the 2 immersions on at all l need help please to get the system running safely please /re commisioning a drained down system You're posting from diybanter - get a man in -- geoff |
#3
Posted to uk.d-i-y
|
|||
|
|||
how do l recommision a drained down direct 210L unvented tribunewaterheater cylinder
On 10/01/2013 20:08, peterpeter wrote:
Hi l just bought an empty flat, where the water was turned off and the water heater cylinder was drained down and the electric turned off too ive turned the electric on but when l turned the water on the direct unvented water heater ( a tribune range he ) does not fill then the water comes out of the overflow ( tundish ) until l turn the water off at the main. as soon as l turn the water off /the water supply to the taps and shower and toilet stop too/ hence l think the cylinder isn't filling ! Do you see the pressure relief valve? Why is it open? Unless you know the answer to this, I suggest you ponder the following: You can do an awful lot of damage with a pressurised HW cylinder. Your one contains over a fifth of a ton of potentially boiling (superheated!) water. That's obviously potentially lethal. Qualified plumbers need special certification to be allowed to play with these. So, as geoff says, get a man in. |
#4
Posted to uk.d-i-y
|
|||
|
|||
how do l recommision a drained down direct 210L unvented tribunewaterheater cylinder
On 10/01/2013 20:08, peterpeter wrote:
Hi l just bought an empty flat, where the water was turned off and the water heater cylinder was drained down and the electric turned off too ive turned the electric on but when l turned the water on the direct unvented water heater ( a tribune range he ) does not fill then the water comes out of the overflow ( tundish ) until l turn the water off at the main. as soon as l turn the water off /the water supply to the taps and shower and toilet stop too/ hence l think the cylinder isn't filling ! is there anything that l should be doing once the water has been turned off and the system drained please, so l can refill the cylinder safely/ all the taps around the flat work ok when the water is turned on l havn't tried to switch the 2 immersions on at all l need help please to get the system running safely please /re commisioning a drained down system I replied to this the first time you posted it yesterday... http://groups.google.com/group/uk.d-...42d05bac7fd25d Basically you need to work out which valve is defective and why, and then replace it. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
direct 210 l unvented water heater cylinder that has been drained down | UK diy | |||
Tribune unvented direct cylinder | UK diy | |||
Unvented Direct water cylinder | UK diy | |||
Draining down a sealed unvented direct cylinder | UK diy | |||
Fitting an unvented direct cylinder - some queries | UK diy |