Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
domestic bathroom fan
Having removed an overrun 4" bathroom extractor fan ( to be relocated
)i noticed that the earth wire had been left bare , unconnected ( no position to connect it), and wraped around the outside sleeving. As i intend on being a cheeky bugger and using the existing cable and set up, i wondered if that was correct. It seems as if it was installed by a qualified sparky as the quality of install was high, and also it was a large-ish insurance job. And before you jump down my throat i'm doing the work for myself. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bathroom Ceiling Finish | UK diy | |||
Under-floor heating for a bathroom - hot water or electric, and how to control? | UK diy | |||
Bathroom vent through roof | UK diy | |||
Domestic RCCB tripping | UK diy | |||
where to find replacement old bathroom taps? | UK diy |