Metal plate for securing round post to flat patio slabs
I'm looking for a neat way of screwing down a series of round wooden posts
(probably 90mm diameter, though that could be changed) onto a flat patio. I know that Metposts make a square securing gizmo (hollow tube and flat base plate) but as far as I can see neither they nor anyone else do the same thing in a circular fitting. Does anyone know of something suitable? Many thanks. Bert |
Metal plate for securing round post to flat patio slabs
On 14/06/2012 17:30, Bert Coules wrote:
I'm looking for a neat way of screwing down a series of round wooden posts (probably 90mm diameter, though that could be changed) onto a flat patio. I know that Metposts make a square securing gizmo (hollow tube and flat base plate) but as far as I can see neither they nor anyone else do the same thing in a circular fitting. Does anyone know of something suitable? Many thanks. Bert Scaffold tubes have 'feet' to protect the ground, may be you could modify something like that? -- Dave - The Medway Handyman www.medwayhandyman.co.uk |
Metal plate for securing round post to flat patio slabs
The Medway Handyman wrote:
Scaffold tubes have 'feet' to protect the ground... Nice idea, thanks. Bert |
Metal plate for securing round post to flat patio slabs
On Thu, 14 Jun 2012 17:30:08 +0100, "Bert Coules"
wrote: I'm looking for a neat way of screwing down a series of round wooden posts (probably 90mm diameter, though that could be changed) onto a flat patio. I know that Metposts make a square securing gizmo (hollow tube and flat base plate) but as far as I can see neither they nor anyone else do the same thing in a circular fitting. Does anyone know of something suitable? Many thanks. Bollards, I have seen such a thing holding up removable bollard posts. A quick google finds something like this pictured near bottom of page. http://www.barricade-ltd.com/Product...-bollards.html I expect there are others. Another search term would be court sockets as some tennis nets are supported by something similar. Can't see any being as cheap as the ordinary metpost type though. Sometimes it is just as inexpensive to go to a small fabrication shop of the type that is found on industrial estates everywhere and get them to make someting to your exact spec, especially for a relatively simple item such as what you want. G.Harman |
Metal plate for securing round post to flat patio slabs
G Harman wrote:
Bollards. Thanks for the link. That short round fitting is exactly what I had in mind. Can't see any being as cheap as the ordinary metpost type though. Sometimes it is just as inexpensive to go to a small fabrication shop... Yes, that's something that's occured to me. Bert |
Metal plate for securing round post to flat patio slabs
On Jun 14, 8:08*pm, "Bert Coules" wrote:
G Harman wrote: Bollards. Thanks for the link. *That short round fitting is exactly what I had in mind. Can't see any being as cheap as the ordinary metpost type though. Sometimes it is just as inexpensive to go to a small fabrication shop.... Yes, that's something that's occured to me. Bert It might be cheaper to sink 4 ss threaded rods into the slab and put the post onto them, fixed all round with resin. A welder would make producing the brackets easy. NT |
Metal plate for securing round post to flat patio slabs
On Thursday, June 14, 2012 6:37:42 PM UTC+1, The Medway Handyman wrote:
On 14/06/2012 17:30, Bert Coules wrote: Scaffold tubes have 'feet' to protect the ground, may be you could modify something like that? Kee-Klamps, like scaffold tube fittings, but available in smaller tube sizes as well. Drilling a paving slab will probably cause it to crack. ISTR that various roof edge-protection schemes on flat roofs had the tube fitting secured into a concrete block that rested on a paving slab. |
Metal plate for securing round post to flat patio slabs
Onetap wrote:
Kee-Klamps... Thanks for that. I've found them online at http://keesafety.co.uk/products/kee_klamp . Bert |
Metal plate for securing round post to flat patio slabs
NT wrote:
It might be cheaper to sink 4 ss threaded rods into the slab and put the post onto them, fixed all round with resin. Searching around, that does seem to be a recommended method; thanks. I'm grateful to you and everyone else who answered. Bert |
All times are GMT +1. The time now is 06:18 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter