Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
In Line Plug/Socket Joint for Heater Cable
Hi all
Kick space heater is supplied with 2m of cable - the spec states that removing this will affect warranty. 2m is not enough to reach fused spur and allow slack for withdrawing unit from under kitchen cabinet. So I thought to run heat resistant cable down close to the heater and then use some sort of in line coupler to join this to the supplied heater feed cable. Can anyone suggest something suitable for this 3A application please? Ta Phil |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
T+G Joint From Wreck Discussion - Full Joint Line From Above - Full Joint Line From Top.jpg (1/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (1/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Close Up Of Middle Of Joint Line - Middle Of Joint Line From Above.jpg (1/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Close Up Of Middle Of Joint Line - Middle Of Joint Line From Above.jpg (0/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Full Joint Line From Above - Full Joint Line From Top.jpg (0/1) | Woodworking Plans and Photos |