Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
I have another seriously large fallen Oak.
The crown and canopy are propped 8-10' off the ground on the root ball and snapped off limbs. Is there a technique for removing the *props* without trapping the saw? I don't have access to a winch and I doubt any of my tractors would have enough traction to roll it over. regards -- Tim Lamb |
#2
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
The crown and canopy are propped 8-10' off the ground on the root ball and snapped off limbs. Is there a technique for removing the *props* without trapping the saw? I don't have access to a winch and I doubt any of my tractors would have enough traction to roll it over. Hard to tell from your description but if it cannot be settled by removing tips bit by bit I guess the first step is to remove as many free branches as possible without destabilising it, then sever the root ball by boring, to avoid splitting and then rolling it. Photo might be handy. You're welcome to use my 8 tonne 3 point linkage farmi or 5 tonne tirfor. AJH |
#3
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
In message , andrew
writes The crown and canopy are propped 8-10' off the ground on the root ball and snapped off limbs. Is there a technique for removing the *props* without trapping the saw? I don't have access to a winch and I doubt any of my tractors would have enough traction to roll it over. Hard to tell from your description but if it cannot be settled by removing tips bit by bit I guess the first step is to remove as many free branches as possible without destabilising it, then sever the root ball by boring, to avoid splitting and then rolling it. Job done! I managed to clear the branches down one side and take off the protruding roots. With some chains hitched high up the trunk and the loader tugging down hill it came over. Photo might be handy. Indeed. I wish I enjoyed file handling:-( Umm... Neither Tinypic or Photobucket appear to be working today! You're welcome to use my 8 tonne 3 point linkage farmi or 5 tonne tirfor. Long way to fetch:-) Working with a single chain saw and only wedges to avoid trapping there were some tricky moments with the trunk supported on two broken off limbs. I'll retry a photo this evening. regards -- Tim Lamb |
#4
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
On Thu, 31 Mar 2011 09:31:56 +0100, Tim Lamb wrote:
In message , andrew writes You're welcome to use my 8 tonne 3 point linkage farmi or 5 tonne tirfor. Long way to fetch:-) A touch of hair dye, some photos in the local press and hey presto its a YFC charity drive g -- David |
#5
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
In message , David P
writes On Thu, 31 Mar 2011 09:31:56 +0100, Tim Lamb wrote: In message , andrew writes You're welcome to use my 8 tonne 3 point linkage farmi or 5 tonne tirfor. Long way to fetch:-) A touch of hair dye, some photos in the local press and hey presto its a YFC charity drive g And the photos. Hopefully.... regards http://i828.photobucket.com/albums/z...dow2011003.jpg http://i828.photobucket.com/albums/z...dow2011004.jpg -- Tim Lamb |
#6
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
Tim Lamb wrote:
http://i828.photobucket.com/albums/z...dow2011003.jpg http://i828.photobucket.com/albums/z...dow2011004.jpg Nice piece of scantling timber AJH |
#7
Posted to uk.d-i-y
|
|||
|
|||
ping AJH
Tim Lamb wrote:
And the photos. Hopefully.... http://i828.photobucket.com/albums/z...dow2011003.jpg http://i828.photobucket.com/albums/z...dow2011004.jpg Looks like it wasn't far off tickling those power cables on its way down. Enough gadget wood to keep a scout troop supplied for years ;-) Chris -- Chris J Dixon Nottingham UK Have dancing shoes, will ceilidh. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Fly by night PING PING | Woodworking | |||
OT Ping JT | Woodworking | |||
NT PING | Woodworking | |||
Ping DoN | Metalworking | |||
Ping: TWS | Woodworking |