Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
lap joint box joint pliers
Hi all
whats the difference initial google pics look the same for both Regards |
#2
Posted to uk.d-i-y
|
|||
|
|||
lap joint box joint pliers
"TMC" gurgled happily, sounding much like they were
saying: Hi all whats the difference initial google pics look the same for both Regards About halfway down this page... http://www.crystalandglassbeads.com/...ing-jewellery- pliers.html http://www.crystalandglassbeads.com/...int-pliers.jpg http://www.crystalandglassbeads.com/...int-pliers.jpg "Box Joint Versus Lap Joint Pliers Most pliers are constructed with either box joints or lap joints to hinge and fasten the two halves of the pliers together. You will usually find that lesser quality budget pliers use a lap joint because their cheaper and easier to manufacture. Box joint pliers will always outlast and outperform lap joint pliers and are therefore a far superior type of pliers to choose for your jewellery making. Box joint pliers should retain precise alignment and experience no looseness or side play always open and close smoothly due to their joint construction. Lap joint pliers on the other hand tend to wear very quickly which will result in the pliers becoming loose and wobbly over time." |
#3
Posted to uk.d-i-y
|
|||
|
|||
lap joint box joint pliers
"TMC" wrote in message ... Hi all whats the difference initial google pics look the same for both Regards Have found the answer and that I have only one pair of box joint which are tiny pliers that I hardly ever use Regards |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (1/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (0/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Close Up Of Middle Of Joint Line - Middle Of Joint Line From Above.jpg (1/1) | Woodworking Plans and Photos | |||
Need help finding a "Rosette" joint (toothed, round joint) | Metalworking | |||
Scarf joint or butt joint your choice on crown molding? | Woodworking |