 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#4
Posted to uk.d-i-y
|
|||
|
|||
Dodgy gas joint
wrote in message ... Pulling my cooker out to clean I discovered one of the pipe joints moves easily and needs attention. The supply comes out of the wall as a half inch iron pipe and there is a half inch iron elbow that turns through 90 degrees. It is this fitting that is loose and can be turned by hand. So the elbow needs to be removed and reinstalled in the wall socket. Gas grade ptfe? or Gas grade ptfe and thread sealent? PTFE or thread sealant. Not both. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (1/1) | Woodworking Plans and Photos | |||
| T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (0/1) | Woodworking Plans and Photos | |||
| T+G Joint From Wreck Discussion - Close Up Of Middle Of Joint Line - Middle Of Joint Line From Above.jpg (1/1) | Woodworking Plans and Photos | |||
| Need help finding a "Rosette" joint (toothed, round joint) | Metalworking | |||
| Scarf joint or butt joint your choice on crown molding? | Woodworking | |||
![Heliotrope Smith[_2_] is offline](https://www.diybanter.com/images/SultanThemeVB3R/statusicon/user_offline.gif)
Threaded Mode
