Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
The taps that you press down which should stay on for a while seem to be the
must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) |
#2
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
John wrote:
What is required to make the delay action work? Depending on the design, a correctly-sized loop of cord under the spout will often hold the button down. Failing that, a brick (one of the cheap ones with circular holes instead of a frog is a better fit). (I realise this isn't quite what you wanted :-) ) Pete |
#3
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
John wrote:
The taps that you press down which should stay on for a while seem to be the must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) They're known as 'percussion taps'. AFAIK some models have adjustable timing and others don't - so if yours aren't working properly then presumably it's fair to say that they either need adjusting or replacing... David |
#4
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
Lobster wrote:
John wrote: The taps that you press down which should stay on for a while seem to be the must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) They're known as 'percussion taps'. AFAIK some models have adjustable timing and others don't - so if yours aren't working properly then presumably it's fair to say that they either need adjusting or replacing... David Or perhaps the pub landlord just wants to save on his water bills! |
#5
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
Cash wrote:
Lobster wrote: John wrote: The taps that you press down which should stay on for a while seem to be the must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) They're known as 'percussion taps'. AFAIK some models have adjustable timing and others don't - so if yours aren't working properly then presumably it's fair to say that they either need adjusting or replacing... David Or perhaps the pub landlord just wants to save on his water bills! Infra red detector ones are best. They only switch on when a hand or similar is in range. Bob |
#6
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
In message , Bob Minchin
wrote Infra red detector ones are best. They only switch on when a hand or similar is in range. But that implies some electronics - electronics and water don't mix to give a long term reliable solution. -- Alan news2009 {at} admac {dot} myzen {dot} co {dot} uk |
#7
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
In article ,
Alan writes: In message , Bob Minchin wrote Infra red detector ones are best. They only switch on when a hand or similar is in range. But that implies some electronics - electronics and water don't mix to give a long term reliable solution. The ones I came across used 1 D-cell battery, which lasted about 5 years (but not very heavily used - I think they were supposed to last 1 year in heavy use). None of them ever broke AFAIK, and they were probably 10 years old when I left that place. Sorry, no idea what make they were. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
#8
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
On Sun, 09 Aug 2009 22:50:44 +0100, Bob Minchin wrote:
Cash wrote: Lobster wrote: John wrote: The taps that you press down which should stay on for a while seem to be the must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) They're known as 'percussion taps'. AFAIK some models have adjustable timing and others don't - so if yours aren't working properly then presumably it's fair to say that they either need adjusting or replacing... David Or perhaps the pub landlord just wants to save on his water bills! Infra red detector ones are best. They only switch on when a hand or similar is in range. Bob I like the ones used in many food and food packaging factories - they have the tap mechanism *under* the sink and it has an arm or plate that you push with your knee and it springs back when released. Can't be left on (unless someone deliberately sabotages them), doesn't cut-off until you're ready and you have some control over the flow rate. It also means that you don't have to touch the tap after you've cleaned your hands to either turn it off or to rinse them (depending on tap type). Following on from this, why do the doors to toilets open inwards? I don't mean the cubicles, I mean the entrance to the toilet area. You wash and dry your hands and then have to get hold of a handle that other people will have used without washing their hands. If the door opened outwards, you could just push against it with your shoulder. Having the door set in would prevent passers-by being hit as it opened. SteveW |
#9
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
"Steve Walker" wrote in message ... On Sun, 09 Aug 2009 22:50:44 +0100, Bob Minchin wrote: Cash wrote: Lobster wrote: John wrote: The taps that you press down which should stay on for a while seem to be the must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) They're known as 'percussion taps'. AFAIK some models have adjustable timing and others don't - so if yours aren't working properly then presumably it's fair to say that they either need adjusting or replacing... David Or perhaps the pub landlord just wants to save on his water bills! Infra red detector ones are best. They only switch on when a hand or similar is in range. Bob I like the ones used in many food and food packaging factories - they have the tap mechanism *under* the sink and it has an arm or plate that you push with your knee and it springs back when released. Can't be left on (unless someone deliberately sabotages them), doesn't cut-off until you're ready and you have some control over the flow rate. It also means that you don't have to touch the tap after you've cleaned your hands to either turn it off or to rinse them (depending on tap type). Following on from this, why do the doors to toilets open inwards? I don't mean the cubicles, I mean the entrance to the toilet area. You wash and dry your hands and then have to get hold of a handle that other people will have used without washing their hands. If the door opened outwards, you could just push against it with your shoulder. Having the door set in would prevent passers-by being hit as it opened. SteveW Still no answer to the question of how to fix the delay on the tap - but, when was it decided that urinals didn't need privacy screens - some are so bad that you stand peeing next to someone drying their hands. With some - anyone opening a door can see down the entire row. Mid stream and some kid starts to watch you! In contrast - in the USA they have screens - but in the WCs they have low doors or big gaps down the sides so you don't have privacy for a number 2. |
#10
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
Steve Walker wrote:
On Sun, 09 Aug 2009 22:50:44 +0100, Bob Minchin wrote: Cash wrote: Lobster wrote: John wrote: The taps that you press down which should stay on for a while seem to be the must unreliable item ever invented as they never seem to work properly. I guess that with maintenance they can be adjusted and set to work correctly. What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) They're known as 'percussion taps'. AFAIK some models have adjustable timing and others don't - so if yours aren't working properly then presumably it's fair to say that they either need adjusting or replacing... David Or perhaps the pub landlord just wants to save on his water bills! Infra red detector ones are best. They only switch on when a hand or similar is in range. Bob I like the ones used in many food and food packaging factories - they have the tap mechanism *under* the sink and it has an arm or plate that you push with your knee and it springs back when released. Can't be left on (unless someone deliberately sabotages them), doesn't cut-off until you're ready and you have some control over the flow rate. It also means that you don't have to touch the tap after you've cleaned your hands to either turn it off or to rinse them (depending on tap type). Following on from this, why do the doors to toilets open inwards? I don't mean the cubicles, I mean the entrance to the toilet area. You wash and dry your hands and then have to get hold of a handle that other people will have used without washing their hands. If the door opened outwards, you could just push against it with your shoulder. Having the door set in would prevent passers-by being hit as it opened. SteveW *Hee Hee* It's fairly common on offshore oil installations to have a wash-up area in or near the changing rooms, to wash up before coming into the accomodation module. The wash-basin is sometimes a large trough thing, operated by a foot treadle. Lots of fun with new recruits... Clap hands, water comes on. Clap hands again, water goes off. Recruit tries it: nothing. 'Na, you're doing it all wrong. It's like *this*.' clap Water on. clap water off. Try again. etc, etc..... -- Ron |
#11
Posted to uk.d-i-y
|
|||
|
|||
Public Toilets - Press down taps
On 9 Aug, 22:16, "John" wrote:
What is required to make the delay action work? (I want to challenge my local pub landlord to fix his) Timed-flow taps, the delay is controlled by a viscous damper type thing, I think. Look at the manufacturer's (Armitage Shanks?) instructions. It greatly ****es me off that the premises owners can't be arssed to get the adjuster screw turned; it isn't difficult. They're probably equally lax with the hand-washing provision for their catering staff handling your food. Infra-red are superb when they work properly. The cost & UK-standard vandalism/theft are probably the deterrents against their widespread use. On 10 Aug, Mike Barnes wrote: I never use warm air dryers. They just blow the bugs back onto your hands. I just drip dry mine if nothing hygenic is available, they dry quite quickly due to body heat. ISTR there was a press campaign a few years back stressing research that showed hot air dryers were less hygenic. It turned out the research had been sponsored by manufacturers of paper towels. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA - press that would be useful as a pen press or an embossing press | Woodturning | |||
Brake press fab for shop press | Metalworking | |||
The Reason Hot Taps Are On The Left And Cold Taps Are On The Right | UK diy | |||
Toilets... dirty stinking toilets! | Home Repair |