Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Speed Controler Wanted
I am just in the process of making some raised pannel doors, my problem is
the router in my router table does not run at a low enough speed for the size of bit i'm going to be using, i know there used to be plenty of ready made drill speed controllers available but I can't find anywhere now that stocks them, if all else fails i can get a velman kit from maplin but would rather just buy a ready built box any ideas |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New Electrical Regulations | UK diy | |||
Help wanted in (re) assembling throttle linkage on Kohler engine | UK diy | |||
Welding holes in a chaincase - advice wanted | UK diy |