HI Folks

Just spend a happy few hours rippint two thick layers of paint off our
wooden front gates. Seems that they were 2nd-hand when the guy that
biult the house reused them for our gates - they'd already been
varnished, then he slapped a coat of some unknown paint on top of the
avrnish, and then we unwittingly put our own coat of paint on top of
that lot.

Of course - the rains's got in - and now the whole lot needs to come off
- before applying the microporous preserver...

Anyway - turns out the best tool for the stripping was one of those
'Flap wheels' that goes into an electric drill. Found one at the back of
a cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

So - what's the deal ? - anybody use both and prefer one over the other?

Thanks
Adrian

adrian wrote:
HI Folks

Just spend a happy few hours rippint two thick layers of paint off our
wooden front gates. Seems that they were 2nd-hand when the guy that
biult the house reused them for our gates - they'd already been
varnished, then he slapped a coat of some unknown paint on top of the
avrnish, and then we unwittingly put our own coat of paint on top of
that lot.

Of course - the rains's got in - and now the whole lot needs to come off
- before applying the microporous preserver...

Anyway - turns out the best tool for the stripping was one of those
'Flap wheels' that goes into an electric drill. Found one at the back of
a cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

So - what's the deal ? - anybody use both and prefer one over the other?

Thanks
Adrian
Horse for courses.
CPC, Farnell and Buck & Hickman all part of the farnell group and have
some overlap in stock but their individual pricing and discount structures.
Just like castorama, Brico depot, B&Q, screwfix and trade depot are all
one group

Travis perkins, toolstation, trade counter the same applies.

It is what a large business does. They form different outlets to suit
various customer sectors.

Buy from whoever you feel comfortable with.

Bob

In article , adrian adrian@inspired-
glass.com writes

So - what's the deal ? - anybody use both and prefer one over the other?

I think Farnell took over CPC, and it's a matter of branding. It seems
to me that CPC is aimed at the Maplin crowd (bling 'n' crap) and Farnell
are more aimed at the RS crowd.

You can always find the same stuff on Farnell that you can on CPC, and
vice versa. It sometimes requires some fiddling with order codes.
Prices are usually about the same. The people on the phone are usually
helpful if you can't find something on Farnell that you can on CPC or
vice versa.

Not much in it I think - just go on price.

--
(\__/)
(='.'=) Bunny says Windows 7 is Vi$ta reloaded.
(")_(") http://imgs.xkcd.com/comics/windows_7.png

On May 10, 2:24*pm, Mike Tomlinson wrote:
In article , adrian adrian@inspired-
glass.com writes

So - what's the deal ? - anybody use both and prefer one over the other?

I think Farnell took over CPC, and it's a matter of branding. *It seems
to me that CPC is aimed at the Maplin crowd (bling 'n' crap) and Farnell
are more aimed at the RS crowd. *

You can always find the same stuff on Farnell that you can on CPC, and
vice versa. *It sometimes requires some fiddling with order codes.
Prices are usually about the same.

But often cheaper at Farnell.

On Tue, 12 May 2009 05:44:08 -0700 (PDT), "Man at B&Q" wrote:

On May 10, 2:24*pm, Mike Tomlinson wrote:
In article , adrian adrian@inspired-
glass.com writes

So - what's the deal ? - anybody use both and prefer one over the other?

I think Farnell took over CPC, and it's a matter of branding. *It seems
to me that CPC is aimed at the Maplin crowd (bling 'n' crap) and Farnell
are more aimed at the RS crowd. *

CPC started off specialising in the TV etc. repair parts business, and have diversified from there,
including Maplin type toys etc.. They still do quite a lot of replacement parts for consumer
electronics, & white goods etc. and have a massive range of AV accessories, cables, connectors etc.
Some of their 'gadget' type stuff does occasionally seem to escape into the Farnell catalogue.

You can always find the same stuff on Farnell that you can on CPC, and
vice versa. *It sometimes requires some fiddling with order codes.
Prices are usually about the same.

Although there is some overlap, there is a lot of stuff only available from one of them - I
frequently order from both at the same time. I have had stuff come from Farnell in CPC prepacks..

But often cheaper at Farnell.

I'd disagree on this - IME (mostly components, connectors etc.) CPC are (and have always been since
before Farnell bought them) generally cheaper for identical and similar items, but it's always worth
comparing.

CPC have always been less good at packing heavy/fragile items (I've had lead-acid UPS batteries
arrive un-padded in one of their flimsy cardboard cartons). Things like components also tend to come
in individual bags, which can be a PITA if you need a lot of something.

My general order of pricing in ascending order is :
Rapid
CPC
Farnell
RS

And CPC's min order for free shipping is higher - £45 I think at the mo - Can't remember what
Farnell's is as I buy so much from them I get free shipping on all orders.

In article ,
Mike Harrison writes:

Although there is some overlap, there is a lot of stuff only available from one of them - I
frequently order from both at the same time. I have had stuff come from Farnell in CPC prepacks..

I've had the reverse.

CPC have always been less good at packing heavy/fragile items (I've had lead-acid UPS batteries
arrive un-padded in one of their flimsy cardboard cartons). Things like components also tend to come
in individual bags, which can be a PITA if you need a lot of something.

This is a running joke in the office. First time this happened, someone
had ordered a bulk load of D batteries, and in the same order were a
set of those terrible tubular filament lamps. As we collected the box,
the batteries were rolling around loose inside and powdered glass was
streaming out of the corners...

I ordered about 10 T4 fluorescent tubes. Someone thoughtfully wrapped
them all in bubblewrap, and then bound them in the middle with sellotape,
so tightly that all the tubes were snapped in half.

Often boxes arrive burst open, but remarkably few have actually lost
any contents. I did have one I was watching on the UPS tracker, which
suddenly changed to "burst, leaking, returned"! It included a 5 litre
container of screen wash concentrate, so I'll bet that was fun in the
back of the UPS van.

Now, each time someone says they need a light bulb, several others
around the office chip in with needing 40 D cells, or similar...
But we still use them.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

On Tue, 12 May 2009 15:53:48 UTC, Mike Harrison
wrote:

Although there is some overlap, there is a lot of stuff only available from one of them - I
frequently order from both at the same time. I have had stuff come from Farnell in CPC prepacks..

I've had stuff come from CPC with Farnell labelling...!

CPC have always been less good at packing heavy/fragile items (I've had lead-acid UPS batteries
arrive un-padded in one of their flimsy cardboard cartons). Things like components also tend to come
in individual bags, which can be a PITA if you need a lot of something.

They've recently promised to do something about the bags. But to expand
on my earlier comment about monkeys in the packing department...on more
than one occasion I've received a large box, with all the stuff in the
bottom and a load of the air-filled plastic bags. One of the items
rattling around was a hard disk - in nothing but its antistatic bag.
That's happened too many times (despite complaints, mostly ignored) for
me to buy fragile items any more.

My general order of pricing in ascending order is :
Rapid
CPC
Farnell
RS

I agree.

And CPC's min order for free shipping is higher - £45 I think at the mo - Can't remember what
Farnell's is as I buy so much from them I get free shipping on all orders.

If you buy 'cash', it's min order 20 quid, and free shipping always.

My favourite for components now has to be Digi-Key. Order in morning of
Day 1, delivery in morning of Day 3 (shipped by air from Minnesota).
Carriage flat rate 12 quid, free if you spend 50 quid. Pay VAT (and
that's all) on delivery.
--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
http://www.diybanter.com

In article , Bob Eager
writes

My favourite for components now has to be Digi-Key.

We (uni dept.) won't use them 'cos of catalogue spam.

We made ONE test purchase to see what they were like and since then have
been inundated with their bloody catalogues addressed to whoever's-name-
they-can-find at our office address. Currently, we receive about a
dozen hefty paper catalogues every six months, all of which go straight
into recycling. All calls asking for the deliveries of catalogues to
stop are ignored.

I WILL NOT do business with spammers. End of.

--
(\__/)
(='.'=) Bunny says Windows 7 is Vi$ta reloaded.
(")_(") http://imgs.xkcd.com/comics/windows_7.png

On 12 May 2009 16:20:55 GMT, "Bob Eager" wrote:

On Tue, 12 May 2009 15:53:48 UTC, Mike Harrison
wrote:

Although there is some overlap, there is a lot of stuff only available from one of them - I
frequently order from both at the same time. I have had stuff come from Farnell in CPC prepacks..

I've had stuff come from CPC with Farnell labelling...!

CPC have always been less good at packing heavy/fragile items (I've had lead-acid UPS batteries
arrive un-padded in one of their flimsy cardboard cartons). Things like components also tend to come
in individual bags, which can be a PITA if you need a lot of something.

They've recently promised to do something about the bags. But to expand
on my earlier comment about monkeys in the packing department...on more
than one occasion I've received a large box, with all the stuff in the
bottom and a load of the air-filled plastic bags. One of the items
rattling around was a hard disk - in nothing but its antistatic bag.
That's happened too many times (despite complaints, mostly ignored) for
me to buy fragile items any more.

My general order of pricing in ascending order is :
Rapid
CPC
Farnell
RS

I agree.

And CPC's min order for free shipping is higher - £45 I think at the mo - Can't remember what
Farnell's is as I buy so much from them I get free shipping on all orders.

If you buy 'cash', it's min order 20 quid, and free shipping always.

My favourite for components now has to be Digi-Key. Order in morning of
Day 1, delivery in morning of Day 3 (shipped by air from Minnesota).
Carriage flat rate 12 quid, free if you spend 50 quid. Pay VAT (and
that's all) on delivery.

For components, I'd agree Digikey are very good and have an unbeateble range, but the poorer
exchange rate now means that Farnell are now often cheaper - I just did a production order that a
year ago would have mostly gone to DK but now all I'm getting from them is the stuff Farnell don't
stock..
However Digikey have really taken their re-reeling service for produciton surface mount parts
seriously, with pretty much every line available whearas Farnell seem to have all but abandoned
theirs since it went free, with a pitifully small and seemingly static proportion of their range
available re-reeled.
Digikey's parametric search also blows away the competition (Farnell : poor data but mostly useable,
RS : useless), as the data has obviously been entered by someone who actually understands what it
means (e.g. 5V = 5v =5.0V = 5VDC etc.)
....If they'd only add 'sort by price' to their website.

I just can't figure out why they can't sort out this PITA business of collecting VAT via UPS - they
already do the (harder) import duty part, so why they can't just add the VAT to the invoice as well
is beyond me.

Mike Harrison wrote:
I'd disagree on this - IME (mostly components, connectors etc.) CPC are
(and have always been since before Farnell bought them) generally cheaper
for identical and similar items, but it's always worth comparing.

The biggest differences I've seen are for connectors. Farnell will sell you
a 0.1" header strip made by a brand name (Molex, Harwin, etc) for 10p/pin.
CPC will sell you an unbranded Chinese one for more like 2p/pin. Sometimes
it's useful to be able to buy a specific manufacturer's numbered part, and
that's where Farnell comes into its own, but not for basic things like this.

Theo

On May 12, 11:41*pm, Theo Markettos theom
wrote:
Mike Harrison wrote:
I'd disagree on this - IME (mostly components, connectors etc.) CPC are
(and have always been since before Farnell bought them) generally cheaper
for identical and similar items, but it's always worth comparing.

Not my experience for identical components.

"Similar" is irrelevant. Farnell will be cheaper than Farnell for
"similar", but different, components.


The biggest differences I've seen are for connectors. *Farnell will sell you
a 0.1" header strip made by a brand name (Molex, Harwin, etc) for 10p/pin..
CPC will sell you an unbranded Chinese one for more like 2p/pin.

As above, that's simply not a valid comparison. There will always be
differences between brands.

*Sometimes
it's useful to be able to buy a specific manufacturer's numbered part, and
that's where Farnell comes into its own, but not for basic things like this.

You've obviously never worked in a real production environment with
proper quality control. Often its *essential* to be able to buy a
specific manufacturer's part number as that is all that has been
qualified to go into a particular product, or it's what the customer
specifies on the Bill of Materials. Unbranded chinese would certainly
not be acceptable without a lot of extra paperwork. Case in point are
some unbranded chinese LM317 that were unstable when used in the same
circuit as LM317 from, say, National, and required extra decoupling.

MBQ

"Man at B&Q" wrote in message
...
On May 10, 2:24 pm, Mike Tomlinson wrote:
In article , adrian adrian@inspired-
glass.com writes

So - what's the deal ? - anybody use both and prefer one over the other?

I think Farnell took over CPC, and it's a matter of branding. It seems
to me that CPC is aimed at the Maplin crowd (bling 'n' crap) and Farnell
are more aimed at the RS crowd.

You can always find the same stuff on Farnell that you can on CPC, and
vice versa. It sometimes requires some fiddling with order codes.
Prices are usually about the same.

But often cheaper at Farnell.
--------------------------

I've usually found the opposite, I order via the name onecall and that is
basically
Farnell and CPC order codes.
http://onecall.farnell.com/jsp/searc...Redirect=false

As an example.

Fume extractor Xytronic 426DLX
Farnell 4683705 1 off £79.95
CPC SD00895 1 off £49.65

I emailed them and asked them why the price differnce and was told Farnell
have an extensive technical help deptartment.

So guess what I did......

http://www.rapidonline.com/Tools-Fas...fume+extractor

although we have end colum pricing so get it for £35.
Yes it's a bit different but it looks sexier with those curves.

When I become an MP and get expenses I'll get them from Farnell and have
them
gold plated with my own initials and get them courier'd by naked virgins.
:-)

In article guer6j$rnv$1@qmul, whisky-dave whisky-
scribeth thus

"Man at B&Q" wrote in message
...
On May 10, 2:24 pm, Mike Tomlinson wrote:
In article , adrian adrian@inspired-
glass.com writes

So - what's the deal ? - anybody use both and prefer one over the other?

I think Farnell took over CPC, and it's a matter of branding. It seems
to me that CPC is aimed at the Maplin crowd (bling 'n' crap) and Farnell
are more aimed at the RS crowd.

You can always find the same stuff on Farnell that you can on CPC, and
vice versa. It sometimes requires some fiddling with order codes.
Prices are usually about the same.

But often cheaper at Farnell.
--------------------------

I've usually found the opposite, I order via the name onecall and that is
basically
Farnell and CPC order codes.
http://onecall.farnell.com/jsp/searc...k=gensearch_00
1&Ntt=426dlx&Ntx=&isGoback=false&isRedirect=fal se

As an example.

Fume extractor Xytronic 426DLX
Farnell 4683705 1 off £79.95
CPC SD00895 1 off £49.65


Thats gone up to 61.30 plus VAT...

http://cpc.farnell.com/xytronic/426d...lx/dp/SD00895?
_requestid=583446

I emailed them and asked them why the price differnce and was told Farnell
have an extensive technical help deptartment.

So guess what I did......

http://www.rapidonline.com/Tools-Fas...ent/Soldering-
Equipment/Fume-Extraction/Fume-extractor/81085/kw/fume+extractor


Http://www.rapidonline.com/searchres...ytronic+426DLX

Indeed)...

although we have end colum pricing so get it for £35.
Yes it's a bit different but it looks sexier with those curves.

When I become an MP and get expenses I'll get them from Farnell and have
them
gold plated with my own initials and get them courier'd by naked virgins.
:-)


Supplied by Russ Andrews no doubt;!...





--
Tony Sayer

"adrian" wrote in message
...
HI Folks

Just spend a happy few hours rippint two thick layers of paint off our
wooden front gates. Seems that they were 2nd-hand when the guy that biult
the house reused them for our gates - they'd already been varnished, then
he slapped a coat of some unknown paint on top of the avrnish, and then we
unwittingly put our own coat of paint on top of that lot.

Of course - the rains's got in - and now the whole lot needs to come off -
before applying the microporous preserver...

Anyway - turns out the best tool for the stripping was one of those 'Flap
wheels' that goes into an electric drill. Found one at the back of a
cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

So - what's the deal ? - anybody use both and prefer one over the other?

Thanks
Adrian

as someone else has said they are both part of the farnell group.
they do appeal to different customers tho.... in my job I have to instal dab
radios and CPC have a very good range... FEC have none. Also, service kits
for various electronic equipme t are provided by CPC, but not by FEC.
The other problem we have as a company is that CPC do not send an invoice...
the delivery note doubles as an invoice which is fine for private buyers but
not for companies with separate invoice depts.

BigGirlsBlouse wrote:

The other problem we have as a company is that CPC do not send an
invoice... the delivery note doubles as an invoice which is fine for
private buyers but not for companies with separate invoice depts.

To be fair they do send a proper invoice - stapled to the delivery note
usually. The tricky thing is you can't get them to send that to a
different place from the goods.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

In article ,
John Rumm writes:
BigGirlsBlouse wrote:

The other problem we have as a company is that CPC do not send an
invoice... the delivery note doubles as an invoice which is fine for
private buyers but not for companies with separate invoice depts.

To be fair they do send a proper invoice - stapled to the delivery note
usually. The tricky thing is you can't get them to send that to a
different place from the goods.

If you have an account, you get a monthly invoice, which goes to
a different address (or can do). The trouble with that one is that
it only has their invoice numbers on it, and not your purchase
order number, which most accounts departments require in order to
make a payment.

They do at least seem to have sorted out receiving BACS payments
for last couple of years. At one time, they didn't automatically
reconcile received BACS payments with accounts, until they'd
sent you a nastygram for non-payment, and you had to ring up
and get Accounts to crawl back through their BACS receipts to
find the payment you'd made months before.

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

In message , BigGirlsBlouse
writes
The other problem we have as a company is that CPC do not send an
invoice... the delivery note doubles as an invoice which is fine for
private buyers but not for companies with separate invoice depts.

You mean ...

You have to separate the del note and invoice and forward it ?

My heart bleeds

We manage it here

--
geoff

"geoff" wrote in message
...
In message , BigGirlsBlouse
writes
The other problem we have as a company is that CPC do not send an
invoice... the delivery note doubles as an invoice which is fine for
private buyers but not for companies with separate invoice depts.

You mean ...

You have to separate the del note and invoice and forward it ?

My heart bleeds

We manage it here

--
geoff

the problem is that the individual customer of a large company receives the
goods but does not realise that the invoice is attached..does not forward to
invoice dept and the company eventually gets put on block for none
payment.... given up using CPC cos good never arrived because we were on
block and never informed of same!

geoff wrote:
In message , BigGirlsBlouse
writes
The other problem we have as a company is that CPC do not send an
invoice... the delivery note doubles as an invoice which is fine for
private buyers but not for companies with separate invoice depts.

You mean ...

You have to separate the del note and invoice and forward it ?

My heart bleeds

We manage it here

Its also a bit annoying when you want to drop ship something to a
customer. You then need to get them to forward the invoice back to you,
and it also discloses your markup.

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

Its also a bit annoying when you want to drop ship something to a
customer. You then need to get them to forward the invoice back to
you, and it also discloses your markup.


Some of us might applaud them for spreading transparency from MPs'
expenses to traders' mark-ups
--
R

neverwas wrote:
Its also a bit annoying when you want to drop ship something to a
customer. You then need to get them to forward the invoice back to
you, and it also discloses your markup.


Some of us might applaud them for spreading transparency from MPs'
expenses to traders' mark-ups

Well MPs might survive without their markups, but traders kind of depend
on them!

--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

On Sun, 10 May 2009 12:42:17 UTC, adrian
wrote:

Anyway - turns out the best tool for the stripping was one of those
'Flap wheels' that goes into an electric drill. Found one at the back of
a cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

The product ranges are very different, although they overlap quite a
bit. CPC are aimed at supplying consumers and small electrical shops,
etc. Farnell are more 'trade' (well, electronics trade) based.

For example, I buy loads of different stuff from CPC (but avoid anything
too fragile, given the monkeys in their packing department). From
Farnell, I buy stuff such as hard to find chips (e.g. a rare UART and
hard to find static RAM, recently).

CPC have no minimum order, but a small order charge, etc. Unless you
have an account, there is a minimum order at Farnell of 20 quid, which
you *have* to spend. But at basic carriage level, carriage is then free.
They both use UPS fro delivery but I think the default Farnell service
is 'next day' (which it isn't for CPC, although most times the stuff
does arrive next day).
--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
http://www.diybanter.com

HI again folks

Bob Eager wrote:
On Sun, 10 May 2009 12:42:17 UTC, adrian
wrote:

Anyway - turns out the best tool for the stripping was one of those
'Flap wheels' that goes into an electric drill. Found one at the back of
a cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

The product ranges are very different, although they overlap quite a
bit. CPC are aimed at supplying consumers and small electrical shops,
etc. Farnell are more 'trade' (well, electronics trade) based.

For example, I buy loads of different stuff from CPC (but avoid anything
too fragile, given the monkeys in their packing department). From
Farnell, I buy stuff such as hard to find chips (e.g. a rare UART and
hard to find static RAM, recently).

CPC have no minimum order, but a small order charge, etc. Unless you
have an account, there is a minimum order at Farnell of 20 quid, which
you *have* to spend. But at basic carriage level, carriage is then free.
They both use UPS fro delivery but I think the default Farnell service
is 'next day' (which it isn't for CPC, although most times the stuff
does arrive next day).

Thanks for the explanation....

I did notice the minimum order on Farnell (which seems to be 35euro - so
hopefully that would include 'free' delivery to Ireland).

I've requested a printed catalogue - so we'll see what turns up...

I like the CPC == Maplins / Farnell == RS analogy -

The good thing about CPC (putting their tendency to 'bling' aside!) is
that their delivery rates to Ireland are very reasonable. Lots of UK
suppliers (especially the eBay ones) seem to think that Ireland is just
next door ot Outer Mongolia - and charge crazy prices for delivery...

Another catalogue to read in bed - sad or what g??

Thanks guys
Adrian

In article ,
adrian writes:

Thanks for the explanation....

I did notice the minimum order on Farnell (which seems to be 35euro - so
hopefully that would include 'free' delivery to Ireland).

I've requested a printed catalogue - so we'll see what turns up...

The Farnell one is a boxed 3-set.
CPC is just one, albeit big. (They used to do a separate
White Goods catalogue, but that seemed to stop about 8 years
ago and you have to ring up for White Goods spares now.)

--
Andrew Gabriel
[email address is not usable -- followup in the newsgroup]

"adrian" wrote in message
...
HI Folks

Just spend a happy few hours rippint two thick layers of paint off our
wooden front gates. Seems that they were 2nd-hand when the guy that biult
the house reused them for our gates - they'd already been varnished, then
he slapped a coat of some unknown paint on top of the avrnish, and then we
unwittingly put our own coat of paint on top of that lot.

Of course - the rains's got in - and now the whole lot needs to come off -
before applying the microporous preserver...

Anyway - turns out the best tool for the stripping was one of those 'Flap
wheels' that goes into an electric drill. Found one at the back of a
cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

So - what's the deal ? - anybody use both and prefer one over the other?

Thanks
Adrian

What was the question?

In article , Clive
writes

What was the question?

Not the brightest bulb in the box, are you "Clive" (aka Rob the Tiscali
Idiot, troll extraordinaire) ?

--
(\__/)
(='.'=) Bunny says Windows 7 is Vi$ta reloaded.
(")_(") http://imgs.xkcd.com/comics/windows_7.png

On May 10, 6:51*pm, "Clive" wrote:
"adrian" wrote in message

...



HI Folks

Just spend a happy few hours rippint two thick layers of paint off our
wooden front gates. Seems that they were 2nd-hand when the guy that biult
the house reused them for our gates - they'd already been varnished, then
he slapped a coat of some unknown paint on top of the avrnish, and then we
unwittingly put our own coat of paint on top of that lot.

Of course - the rains's got in - and now the whole lot needs to come off -
before applying the microporous preserver...

Anyway - turns out the best tool for the stripping was one of those 'Flap
wheels' that goes into an electric drill. Found one at the back of a
cupboard g - and it's done the job well.. - covered me in ground-up
gerrn & gery paint - Incredible Hulk, anybody ?g

Went looking on CPC for a replacement flap wheel (CPC are ideal because
they'll deliver to us out here in South-West ireland without charging
silly prices for P&P). They'd only got a few wheels.

Now - I'd always thought tha CPC and Farnell were very much the same
company - but a search on Farnell's website showed a much wider range of
flapwheels - even though the website looked very much like the CPC one -
just rebadged..

So - what's the deal ? - anybody use both and prefer one over the other?

Thanks
Adrian

What was the question?

"Are you genuinely a ****?"