Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
Hi,
I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? TIA, Mark. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
"Mark" wrote in message ... Hi, I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? TIA, Mark. Send a photo - or website link to a similar tap then someone will recognise the problem. There are many different types. |
#3
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 11:30:04 +0100, "John"
wrote: "Mark" wrote in message .. . Hi, I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? TIA, Mark. Send a photo - or website link to a similar tap then someone will recognise the problem. There are many different types. http://img217.imageshack.us/img217/5260/taps1.jpg or http://yfrog.com/61taps1j and http://img2.imageshack.us/img2/7718/taps2.jpg or http://yfrog.com/02taps2j |
#4
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
"Mark" wrote in message news On Sun, 19 Apr 2009 11:30:04 +0100, "John" wrote: "Mark" wrote in message .. . Hi, I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? TIA, Mark. Send a photo - or website link to a similar tap then someone will recognise the problem. There are many different types. http://img217.imageshack.us/img217/5260/taps1.jpg or http://yfrog.com/61taps1j and http://img2.imageshack.us/img2/7718/taps2.jpg or http://yfrog.com/02taps2j My money would be on being able to separate the silver coloured extension piece from the brass that is screwed into the tap. If you cannot pull it off then get something to go under the extension (small jawed spanner or adjustable etc) and give it a sharp upwards whack (with a heavier spanner or adjustable etc). I reckon the extension will come off with a clout or two so be ready to catch it. You would now be able to get a ring spanner or socket on the valve. You should then find that the brass bit is a normal tap valve. If you should need to replace that part (if it is not rewaserable) than take that and the extension piece together to the plumbers merchants so that the splines on the valve can be matched to the extension. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 11:56:26 +0100, Mark wrote:
http://img217.imageshack.us/img217/5260/taps1.jpg Ah that sort of mixer. That side isn't the left hand thread side is it? Do the two taps turn on in the same or opposite directions? They are opposite if, for example, the top of the tap moves away from you for on, on both taps. The off direction of rotation (should) tighten the tap body. -- Cheers Dave. |
#6
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 16:29:51 +0100 (BST), "Dave Liquorice"
wrote: On Sun, 19 Apr 2009 11:56:26 +0100, Mark wrote: http://img217.imageshack.us/img217/5260/taps1.jpg Ah that sort of mixer. That side isn't the left hand thread side is it? Do the two taps turn on in the same or opposite directions? They are opposite if, for example, the top of the tap moves away from you for on, on both taps. The off direction of rotation (should) tighten the tap body. They do turn in opposite directions but this side should have the right hand thread. |
#7
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 19:16:56 +0100, Mark wrote:
They do turn in opposite directions but this side should have the right hand thread. Operative word that "should" have you tried for LH thread? -- Cheers Dave. |
#8
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
Mark wrote:
Hi, I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? Come across that a few times. I happen to have one of those 'locking' adjustable wrenches http://www.axminster.co.uk/product.a...sfile=1&jump=0 Which means you can clamp the wrench onto the hexagons & it won't slip & round them off. Percussive maintenance often helps. Get an adjustable on there as tight as possible & tap it around. Lots of short sharp taps work better than big whacks. Failing that, stiltson wrench. The harder you turn the more they grip, but they will make a mess of the brasswork - will it be seen afterwards? -- Dave - The Medway Handyman www.medwayhandyman.co.uk |
#9
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 10:42:54 GMT, "The Medway Handyman"
wrote: Mark wrote: Hi, I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? Come across that a few times. I happen to have one of those 'locking' adjustable wrenches http://www.axminster.co.uk/product.a...sfile=1&jump=0 Which means you can clamp the wrench onto the hexagons & it won't slip & round them off. They look useful. Percussive maintenance often helps. Get an adjustable on there as tight as possible & tap it around. Lots of short sharp taps work better than big whacks. Failing that, stiltson wrench. The harder you turn the more they grip, but they will make a mess of the brasswork - will it be seen afterwards? They won't be seen but I am concerned about wrecking the nut completely. My adjustable spanner will not lock and will just fall off the nut. I guess it's the mole wrench next! |
#10
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 11:05:56 +0100, Mark wrote:
Any "magic" solutions, please? Only magic in the sense of sufficiently advanced technology: a *good* adjustable - Bahco rather than Blackspur. -- John Stumbles -- http://yaph.co.uk Xenophobia? Sounds a bit foreign to me. |
#11
Posted to uk.d-i-y
|
|||
|
|||
Freeing stubborn tap head gear
On Sun, 19 Apr 2009 11:05:56 +0100, Mark
wrote: Hi, I've got a really stubborn tap head gear that won't shift. I've tried penetrating oil and applying heat to the tap but it won't move. I can't get a ring spanner on it and I will be rounding off the nut or breaking the whole tap if I keep trying with an open ended spanner. It's an expensive and fancy mixer tap so I don't want to wreck it. Any "magic" solutions, please? Thanks for all the replies. I have realized now that I don't need to shift the tap gear to fix the problem. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing a stubborn shower head | Home Repair | |||
KBC S600 Gear Head Drill Press | Metalworking | |||
Anyone Have a JET GHD-20PFT (WMH) Gear Head Drill Press? | Woodworking | |||
Freeing up universal joint | Metalworking | |||
How do I figure out the pressure angle on a gear - was usingmini-lathe for dividing head | Metalworking |