Coax cable
I'm replacing the old coax to my main TV set as there's definately a fault
in it somewhere. So I've decided to use sattelite cable as its a lot less lossy. The run is only about 20 metres, so will standard RG6 satelitte cable be fine for this, or would anyone recommend getting something a bit more heavy duty like CT100? Reason I ask is the RG6 (the cheap stuff you get in DIY shops) isn;t as dear and don;t want to splash out on the heavier duty cable if it can be avoided. Thanks in advance. -- Best Wishes Simon Taylor |
Coax cable
I'm replacing the old coax to my main TV set as there's definately a fault
in it somewhere. So I've decided to use sattelite cable as its a lot less lossy. The run is only about 20 metres, so will standard RG6 satelitte cable be fine for this, or would anyone recommend getting something a bit more heavy duty like CT100? Reason I ask is the RG6 (the cheap stuff you get in DIY shops) isn;t as dear and don;t want to splash out on the heavier duty cable if it can be avoided. This tells you chapter and verse. http://www.wrightsaerials.tv/article...ty-hmdi-m.html Peter Crosland |
Coax cable
Simon (Dark Angel) submitted this idea :
I'm replacing the old coax to my main TV set as there's definately a fault in it somewhere. So I've decided to use sattelite cable as its a lot less lossy. The cable as sold for satellites is the standard these days for both TV and Sat frequencies, along with the use of F type connectors. The run is only about 20 metres, so will standard RG6 satelitte cable be fine for this, or would anyone recommend getting something a bit more heavy duty like CT100? It is not so much heavy duty as lower loss and better screened. Reason I ask is the RG6 (the cheap stuff you get in DIY shops) isn;t as dear and don;t want to splash out on the heavier duty cable if it can be avoided. The RG6 might well work, but has less immunity to impulse noise like your microwave starting and thermostats switching. This is no more important due to the change over to digital. I originally wired an outlet to almost every room in the house with RG6, before CT100 became available. Last week I replaced the RG6 down-lead to the distribution unit with CT100. As and when, I will eventually replace all of the RG6 with CT100 simply for its better immunity. I don't usually buy from DIY shops - I paid £18 for a full drum of CT100 from an electrical wholesaler. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
Coax cable
"Harry Bloomfield" wrote in message... I don't usually buy from DIY shops - I paid £18 for a full drum of CT100 from an electrical wholesaler. Was that a 50m drum or 100m drum? -- Best Wishes Simon Taylor |
Coax cable
Simon (Dark Angel) explained :
"Harry Bloomfield" wrote in message... I don't usually buy from DIY shops - I paid £18 for a full drum of CT100 from an electrical wholesaler. Was that a 50m drum or 100m drum? [Walks out to workshop in the rain...] It doesn't say, but my guess would be 100m because I have used about 20m from it and it still looks very full. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
Coax cable
"Harry Bloomfield" wrote in message... It doesn't say, but my guess would be 100m because I have used about 20m from it and it still looks very full. Next question, which electrical wholesalers did you aquire it from? If its a national chain, I'm hoping they've probably got a branch near me. -- Best Wishes Simon Taylor |
Coax cable
Simon (Dark Angel) wrote:
If its a national chain, I'm hoping they've probably got a branch near me. Try these guys: http://www.tlc-direct.co.uk/Main_Ind...ite/index.html |
Coax cable
Simon (Dark Angel) was thinking very hard :
"Harry Bloomfield" wrote in message... It doesn't say, but my guess would be 100m because I have used about 20m from it and it still looks very full. Next question, which electrical wholesalers did you aquire it from? If its a national chain, I'm hoping they've probably got a branch near me. WF, but I think most of them will keep it in stock. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
Coax cable
On Tue, 24 Mar 2009 17:41:07 -0000, "Simon \(Dark Angel\)"
wrote: I'm replacing the old coax to my main TV set as there's definately a fault in it somewhere. So I've decided to use sattelite cable as its a lot less lossy. The run is only about 20 metres, so will standard RG6 satelitte cable be fine for this, or would anyone recommend getting something a bit more heavy duty like CT100? Reason I ask is the RG6 (the cheap stuff you get in DIY shops) isn;t as dear and don;t want to splash out on the heavier duty cable if it can be avoided. Thanks in advance. Ebay - 5829397879 |
Coax cable
"Cod Roe" wrote in message
... Simon (Dark Angel) wrote: If its a national chain, I'm hoping they've probably got a branch near me. Try these guys: http://www.tlc-direct.co.uk/Main_Ind...ite/index.html FWIY I use this for both terrestrial and satellite. The cables terminate on DIY faceplates made using dummy faceplates, F Barrels, and F elbows. -- Michael Chare |
All times are GMT +1. The time now is 08:53 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter