Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
boiler gas valve replacement
I finally got a plumber round to look at my failing gas boiler.
Basically system fires up, then when it reaches required temperature it cuts out - pilot and everything. There is nothing wrong with pilot, thermocouple etc and I checked the circuit boards. Just looking at it, he told me that the fault was the gas valve which would need replacing. Of course, like all his brethren, he is too busy to do this in the next month or so, but he said it is something I could do myself. So, is he likely to be correct in his diagnosis? Is he right to suggest that this job could be done by a competent DIYer? thanks in advance for any response Stony |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacement boiler advice please. | UK diy | |||
Mid-Position 3 Port Valve - Hot Water (A) position & OFF - but HW flow to boiler? | UK diy | |||
New Combi boiler | UK diy | |||
Leaving a Honeywell CH valve energised, wiring choices | UK diy | |||
Replacement basin mixer valve? | UK diy |