 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
RCD for shower?
I've been renovating the G/Fs bathroom this week, upon going to turn off
the shower supply, I found that it was supplied from a really old fuse box, as well as looking like it is a spur from the cooker supply. There are no RCDs anywhere in system. To make the shower a little safer, I would like to fit a RCD to it. Would something like this be suitable: http://www.screwfix.com/prods/69659/ I presume, to fit this, I would disconnect the supply to the pull switch, fit the supply to the RCD, then the output to the pull switch? Ta for any thoughts. Alan. -- To reply by e-mail, change the ' + ' to 'plus'. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Do I need to vent a walk in shower that is replacing a tub/shower combo? | Home Repair | |||
| Need to add shower (or shower/tub) to existing half bath - wet bar ibstalled on wall opposite | Home Repair | |||
| Shower Cabin/Steam Shower Recommendations (Dreamline/Luxaris) | Home Repair | |||
| Shower pump for can type shower head. | UK diy | |||
Threaded Mode
