DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Grouting rough unglazed tiles (https://www.diybanter.com/uk-diy/265089-grouting-rough-unglazed-tiles.html)

Peter Taylor November 19th 08 09:30 AM

Grouting rough unglazed tiles
 
I'm a bit worried! The wife has chosen some tiles for the bathroom and I've
stuck them on the wall but I don't want to go any further. She insists I
finish the job with the cream grouting but I just know I'm gonna mess it up.

The tiles are 50mm square like mosaics, about 8mm thick. They look like
rough stone and the edges are uneven, so the grout will go all over the
place. And I can't just let it dry and rub it off like with glazed tiles.

Is there a trick I need to know about to keep the tiles clean?

** Posted from http://www.teranews.com **

Mark November 19th 08 11:22 AM

Grouting rough unglazed tiles
 



"Peter Taylor" wrote in message
...
I'm a bit worried! The wife has chosen some tiles for the bathroom and
I've stuck them on the wall but I don't want to go any further. She
insists I finish the job with the cream grouting but I just know I'm gonna
mess it up.

The tiles are 50mm square like mosaics, about 8mm thick. They look like
rough stone and the edges are uneven, so the grout will go all over the
place. And I can't just let it dry and rub it off like with glazed tiles.

Is there a trick I need to know about to keep the tiles clean?



Point them up as a bricklayer would. i.e just apply grout to the joints
and not swish it across the face. I doubt your tiles are rougher than
bricks.

Parellel strips of masking tape on either side of the joint might help.


mark



PeterMcC November 19th 08 03:14 PM

Grouting rough unglazed tiles
 
wrote in message
...
On Wed, 19 Nov 2008 05:12:34 -0800 (PST), Andy Dingley
wrote:

snip

Not a total solution on its own, but a real rubber tiler's sponge
(couple of quid from Axminster) works far better than a tuppence
ha'penny pan scourer.


Can you get rubber tiles for walls? :-)


Don't be stupid!

It's the tiler that's real rubber, not the tiles.

;)


--
PeterMcC

If you feel that any of the above is incorrect,
inappropriate or offensive in any way,
please ignore it and accept my apologies.




Andy Dingley November 19th 08 03:50 PM

Grouting rough unglazed tiles
 
On 19 Nov, 13:18, wrote:
Can you get rubber tiles for walls? * *:-)


No idea, but you can get them for floors.

Price of the things is truly staggering though! They look the
business, but just not affordable.

Peter Taylor November 19th 08 06:03 PM

Grouting rough unglazed tiles
 

"Steve Firth" wrote in message
. ..
Peter Taylor wrote:

Is there a trick I need to know about to keep the tiles clean?


After grouting "gres" tiles which are unglazed and have a "broken" edge
started to send me insane - I was spending more time cleaning than
grouting - I got a mortar gun and used that to apply the grout to the
gaps. Much easier than a squegee or sponge.


Great idea, thanks! I went to the tile place to see what they had and they
looked at me as if I was mad :) (Not far out actually). But on the old
internet I found a better idea of using a grout bag, like an icing bag.
Amazon sell them.

Here are the tiles she selected:
http://www.ionicstone.com/product.ph...&product_id=13
They told me not to bother about the holes in the tiles, just fill them with
grout using a squeegee. I reckon it will look terrible, what do you think?

** Posted from http://www.teranews.com **

Peter Taylor November 19th 08 06:05 PM

Grouting rough unglazed tiles
 

"mark" wrote in message
...



"Peter Taylor" wrote in message
...
I'm a bit worried! The wife has chosen some tiles for the bathroom and
I've stuck them on the wall but I don't want to go any further. She
insists I finish the job with the cream grouting but I just know I'm
gonna mess it up.

The tiles are 50mm square like mosaics, about 8mm thick. They look like
rough stone and the edges are uneven, so the grout will go all over the
place. And I can't just let it dry and rub it off like with glazed
tiles.

Is there a trick I need to know about to keep the tiles clean?



Point them up as a bricklayer would. i.e just apply grout to the joints
and not swish it across the face. I doubt your tiles are rougher than
bricks.

Parellel strips of masking tape on either side of the joint might help.


mark


I'm going to take you up on the tape idea Mark, thanks!


Steve Firth November 20th 08 08:31 AM

Grouting rough unglazed tiles
 
Peter Taylor wrote:

They told me not to bother about the holes in the tiles, just fill them with
grout using a squeegee. I reckon it will look terrible, what do you think?


I don't know, it depends on the tiles and the grout. When I tried it on
ours erindoors told me to clean it off.

Tim S November 20th 08 10:09 AM

Grouting rough unglazed tiles
 
Peter Taylor coughed up some electrons that declared:


"Steve Firth" wrote in message
. ..
Peter Taylor wrote:

Is there a trick I need to know about to keep the tiles clean?


After grouting "gres" tiles which are unglazed and have a "broken" edge
started to send me insane - I was spending more time cleaning than
grouting - I got a mortar gun and used that to apply the grout to the
gaps. Much easier than a squegee or sponge.


Great idea, thanks! I went to the tile place to see what they had and
they
looked at me as if I was mad :) (Not far out actually). But on the old
internet I found a better idea of using a grout bag, like an icing bag.
Amazon sell them.

Here are the tiles she selected:
http://www.ionicstone.com/product.ph...&product_id=13
They told me not to bother about the holes in the tiles, just fill them
with
grout using a squeegee. I reckon it will look terrible, what do you
think?

** Posted from http://www.teranews.com **


Looks like travertine, in the absence of anything on the website!

In which case, yes, you do fill the holes with grout - or the tiles are
supplied ready filled.

Cheers

Tim



Mark November 20th 08 06:17 PM

Grouting rough unglazed tiles
 

"Peter Taylor" wrote in message
...
I'm a bit worried! The wife has chosen some tiles for the bathroom and
I've stuck them on the wall but I don't want to go any further. She
insists I finish the job with the cream grouting but I just know I'm gonna
mess it up.

The tiles are 50mm square like mosaics, about 8mm thick. They look like
rough stone and the edges are uneven, so the grout will go all over the
place. And I can't just let it dry and rub it off like with glazed tiles.

Is there a trick I need to know about to keep the tiles clean?
** Posted from http://www.teranews.com **





I think I'd use ivory coloured grout on those tiles.


mark



Peter Taylor November 20th 08 08:10 PM

Grouting rough unglazed tiles
 

"mark" wrote in message
et...

I think I'd use ivory coloured grout on those tiles.

mark


Thanks. You're right - that's what they recommended as well. The colour I
bought is called Jasmine (but it's ivory) :)

I have a few tiles left over so I'm going to do two tests to see how it
looks, just grouting the joints and filling the holes with grout as well.
Thanks for all the help.



** Posted from http://www.teranews.com **


All times are GMT +1. The time now is 10:47 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter