Folks,

I need some stainless strip: 800mm by 50mm by 5mm. Can anyone
recommend a supplier for such a small quantity?

Ian

PS Whistons of Stockport, RIP.

On Sun, 19 Oct 2008 11:04:55 -0700 (PDT), The Real Doctor
wrote:

Folks,

I need some stainless strip: 800mm by 50mm by 5mm. Can anyone
recommend a supplier for such a small quantity?

Ian

PS Whistons of Stockport, RIP.

I'd go to the man up the road who welds stuff
gates and farm machinery mostly
He has plenty of stainless offcuts hanging around
Maybe you have a similar man locally?

Anna

--
Anna Kettle
Lime plaster repair and conservation
Freehand modelling in lime: overmantels, pargeting etc
Tel: ***(+44) *01359 230642
Mob: * (+44) *07976 649862
Please look at my website for examples of my work at:
www.kettlenet.co.uk *

In message
, The
Real Doctor writes
Folks,

I need some stainless strip: 800mm by 50mm by 5mm. Can anyone
recommend a supplier for such a small quantity?

Ian

PS Whistons of Stockport, RIP.
Plenty of scrap metal merchants in Trafford Park who may be able to help
you, alternatively there's quite a few fabricators there and plenty of
places that 'make good' on industrial machinery.

Might be worth your while to have a drive around and see if you can
strike up a beer/metal interface with one.
--
Clint Sharp

On 19 Oct, 23:37, Clint Sharp wrote:
In message
, The
Real Doctor writesFolks,

I need some stainless strip: 800mm by 50mm by 5mm. Can anyone
recommend a supplier for such a small quantity?

Ian

PS Whistons of Stockport, RIP.

Plenty of scrap metal merchants in Trafford Park who may be able to help
you, alternatively there's quite a few fabricators there and plenty of
places that 'make good' on industrial machinery.

Might be worth your while to have a drive around and see if you can
strike up a beer/metal interface with one.

Sorry, I should have clearer. I'm not in Stockport ... I'm in the
middle of nowhere, and my only local enginering company is an
agricultural one who consider using a lump hammer instead of a sledge
hammer the height of sophistication ... stainless?

Ian