Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]() |
|||
|
|||
![]()
Tim Jenkins wrote:
"Andy Jenkins" wrote in message ... On Tue, 7 Oct 2003 12:47:47 +0100, "Tim Jenkins" wrote: "Andy Jenkins" wrote in message ... Hi all, Yes - its blue - it has British Gas and Scottish Gas written on it. It has a 'made by Myson Pumps" with a PE postcode. Does it make any difference ? Andy, No, I was just curious. We have the same pump and I'd heard on the grapevine about someone else having problems with this make/model too, so just wondered if this design was fundamentally flawed ? Hope you get your problem fixed though. Cheers, tim. Friend of mine had two pumps in two years go in new house. Got fed up, called independent plumber, who drained and flushed the system, getting out lots of little solder bits, installed a GRUNFOSS and never looked back.. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Central heating bypass circuit | UK diy | |||
Pool water in central heating system | UK diy | |||
Further to my last post entitled 'Flushing and treating central heating question' | UK diy | |||
mains Hot water, and do I convert open heating to a closed heating system | UK diy | |||
Heating & hot water crisis - advice sought | UK diy |