Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
dog leg gutter
Anyone got any suggestions for a pvc gutter where the wall isn't
straight (who knows why they built the house that way). Over a length of about 6m I guess one end would stand off the wall by about 200 mm if you installed a 2 section straight gutter i.e. there's an angle of something less than 180 degs halfway along. The current joint obviously leaks because it can't be fully snapped into place. I suppose it could be bodged up with silicone, or some kind of lining glued inside to cover the join, but I don't think either would be a permanent solution. Any advice appreciated. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Gutter Bracket | UK diy | |||
how to repair a sag in a gutter | Home Repair | |||
gutter size | Home Repair | |||
gutter cap | Home Ownership |