plug ring circuit keeps flicking the fuse switch on fuse board
 

Just had an extension and new fuse board fitted as a result. One of
the plug rings keeps flicking the fuse switch on the fuse board when
there's a bunch of appliances running off it in the kitchen, the usual
stuff - kettle, washing machine, dryer etc ... I'm gonna talk to the
sparky about this but I'm wondering 1. why this might be happening and
2. if there's a possibility to increase/decrease the tolerance level
before the fuse switch flicks?

plug ring circuit keeps flicking the fuse switch on fuse board
 

The message
from Dundonald contains these words:

Just had an extension and new fuse board fitted as a result. One of
the plug rings keeps flicking the fuse switch on the fuse board when
there's a bunch of appliances running off it in the kitchen, the usual
stuff - kettle, washing machine, dryer etc ... I'm gonna talk to the
sparky about this but I'm wondering 1. why this might be happening and
2. if there's a possibility to increase/decrease the tolerance level
before the fuse switch flicks?

You really need to give more information but:

Are you sure it is a ring circuit, not a radial. Rings usually have 32A
MCBs, a radial may only have 20A MCB.

What are the appliances on the circuit and what do their individual
ratings add up to. 4 amps to the kilowatt should be close enough to see
how highly loaded the circuit can be.

If the capacity is marginal you can avoid tripping the circuit MCB by
making sure the 2 highest rated appliances are not in use at the same
time as every other appliance on the kitchen circuit.

--
Roger Chapman

plug ring circuit keeps flicking the fuse switch on fuse board
 

In article
,
Dundonald wrote:
Just had an extension and new fuse board fitted as a result. One of
the plug rings keeps flicking the fuse switch on the fuse board when
there's a bunch of appliances running off it in the kitchen, the usual
stuff - kettle, washing machine, dryer etc ... I'm gonna talk to the
sparky about this but I'm wondering 1. why this might be happening and
2. if there's a possibility to increase/decrease the tolerance level
before the fuse switch flicks?

What 'flicks'? Just the one for that circuit or one which does others as
well?

--
*Before they invented drawing boards, what did they go back to?

Dave Plowman London SW
To e-mail, change noise into sound.

plug ring circuit keeps flicking the fuse switch on fuse board
 

Dundonald wrote:

Just had an extension and new fuse board fitted as a result. One of
the plug rings keeps flicking the fuse switch on the fuse board when
there's a bunch of appliances running off it in the kitchen, the usual
stuff - kettle, washing machine, dryer etc ... I'm gonna talk to the
sparky about this but I'm wondering 1. why this might be happening and
2. if there's a possibility to increase/decrease the tolerance level
before the fuse switch flicks?

Likely you're putting more appliances on one ring or radial than it
can supply, so the mcb's tripping.

Increase tolerance? Put a wire fuse in might help a little, but not a
lot, and theyre inconvenient when they pop. Anything else would
mean some rewiring.

Simplest workaround is not to switch some much power on at once,
but understandably not a popular option.


NT

plug ring circuit keeps flicking the fuse switch on fuse board
 

On Mar 13, 2:13 am, wrote:
Dundonaldwrote:
Just had an extension and new fuse board fitted as a result. One of
the plug rings keeps flicking the fuse switch on the fuse board when
there's a bunch of appliances running off it in the kitchen, the usual
stuff - kettle, washing machine, dryer etc ... I'm gonna talk to the
sparky about this but I'm wondering 1. why this might be happening and
2. if there's a possibility to increase/decrease the tolerance level
before the fuse switch flicks?

Likely you're putting more appliances on one ring or radial than it
can supply, so the mcb's tripping.

Increase tolerance? Put a wire fuse in might help a little, but not a
lot, and theyre inconvenient when they pop. Anything else would
mean some rewiring.

Simplest workaround is not to switch some much power on at once,
but understandably not a popular option.

NT

Sounds great, except the sparky was explicitly told what the plug
sockets will be used for and it's nothing out of the ordinary for the
kitchen - a washing machine, dish washer, dryer, kettle.