Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
direct or indirect boiler
I'm about to empty my central heating system. I have a Worcester Bosch
28CDi or 35CDi II combi, Is this an indirect system. Assuming the answer is yes which inhibitor should i user the Sentinel X100 or (Screw fix own brand) No Nonsense inhibitor? |
#2
Posted to uk.d-i-y
|
|||
|
|||
direct or indirect boiler
On Mon, 04 Feb 2008 18:56:47 +0000, noname wrote:
I'm about to empty my central heating system. I have a Worcester Bosch 28CDi or 35CDi II combi, Is this an indirect system. Assuming the answer is yes which inhibitor should i user the Sentinel X100 or (Screw fix own brand) No Nonsense inhibitor? It's probably neither a direct or indirect system, (unless you have a HW storage cylinder which is not likely). See the Sealed CH system for the whole story. X100 will comply with the manufacturers instructions, S/fix is /probably/ the same stuff, but then you get no guarantees. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Economy 7, immersion heater, indirect hot water from boiler? | UK diy | |||
direct or indirect | UK diy | |||
Indirect heatbank and boiler compatability | UK diy | |||
replacing a 'direct' hot water cylinder with an 'indirect' one.... | UK diy | |||
Direct vs indirect heating of heat-bank | UK diy |