Waterproof glue for teapot?
Is there a glue suitable for sticking the spout back on to a teapot?
Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy |
Waterproof glue for teapot?
On Jan 31, 2:57*pm, Guy Snape
wrote: Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy Two part epoxy like Araldite. I tried evostick for this once. The spout fell off when it got hot. John |
Waterproof glue for teapot?
Guy Snape wrote:
Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. I simply would not do this. The danger of hot (near-boiling) liquid spewing out over people (or just me!) when the spout fell off would not be fun. And, depending on the damage that caused it to fall off in the first place, you might find it still unusable. -- Rod |
Waterproof glue for teapot?
Guy Snape says...
Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy I've used Araldite to reattach a knob after it's spot weld failed that held it to the lid of a stainless steel tea pot. That has put up with boiling water for several years now. However, for sticking a ceramic spout back on I'd be dubious. As another poster said - it could always fall off again and scold someone. If the teapot is of some sentimental value I'd fix it with araldite then just put it in a display cabinet, certainly not use it. -- David in Normandy |
Waterproof glue for teapot?
On 31 Jan, 14:57, Guy Snape
wrote: Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. I'd use some hot melt chocolate. |
Waterproof glue for teapot?
On Thu, 31 Jan 2008 16:14:22 +0000, Rod
wrote: Guy Snape wrote: Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. I simply would not do this. The danger of hot (near-boiling) liquid spewing out over people (or just me!) when the spout fell off would not be fun. I agree .I thinking poisoning would be the least thing to concern yourself about....You pour boiling water in to the teapot,stir it a couple of times,replace the lid then take it to the table and as you lean over to pour the tea,possibly with the cup or mug in your other hand the spout decides to remove itself from the teapot and someone possibly yourself ,gets a blast of extremely hot water over themselves .. Not nice , Dump the teapot and buy another one . What is so special about that one anyway ?.It can't have been valuable else you would not have been using it anyway . |
Waterproof glue for teapot?
Guy Snape wrote:
Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy Epoxy is very good for this. If the spout will stay in place without assistance mix up epoxy THROUGHLY, smear on, squidge spout back on and use acetone or cellulose thinners to clean up. If it wont stay in place try to use a rubber band. I always bake these repairs in the bottom aga oven - around 90C. That seems to cure the epoxy better and harder. |
Waterproof glue for teapot?
David in Normandy wrote:
Guy Snape says... Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy I've used Araldite to reattach a knob after it's spot weld failed that held it to the lid of a stainless steel tea pot. That has put up with boiling water for several years now. However, for sticking a ceramic spout back on I'd be dubious. As another poster said - it could always fall off again and scold someone. If the teapot is of some sentimental value I'd fix it with araldite then just put it in a display cabinet, certainly not use it. If you cure the epoxy at high temperatures, it wont fail under heat. Its the only glue that really works on porcelain. |
Waterproof glue for teapot?
|
Waterproof glue for teapot?
Guy Snape wrote:
Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy How about JB weld. Try the waterweld stuff, drinking water safe and heat resistant to 300 F / 148 C http://jbweld.net/products/water.php Hope that helps |
Waterproof glue for teapot?
On 1 Feb, 10:26, Rob Horton wrote:
Guy Snape wrote: Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy How about JB weld. Try the waterweld stuff, drinking water safe and heat resistant to 300 F / 148 C http://jbweld.net/products/water.php Hope that helps Just as a warning for this material - which I agree might tolerate the temperature - it does set with a definite grey colour which would be all too apparent if this is a white teapot. I know this is a bit geekish, but I've used one of the other JB Weld epoxies to make a methylated spirit stove out of a beer can - at about 1 oz this is very satisfactory for ultra lightweight camping. Rob |
Waterproof glue for teapot?
robgraham wrote:
On 1 Feb, 10:26, Rob Horton wrote: Guy Snape wrote: Is there a glue suitable for sticking the spout back on to a teapot? Obviously it would need to be resistant to heat and water, and not dissolve into the tea and poison us. Thanks, - guy How about JB weld. Try the waterweld stuff, drinking water safe and heat resistant to 300 F / 148 C http://jbweld.net/products/water.php Hope that helps Just as a warning for this material - which I agree might tolerate the temperature - it does set with a definite grey colour which would be all too apparent if this is a white teapot. I know this is a bit geekish, but I've used one of the other JB Weld epoxies to make a methylated spirit stove out of a beer can - at about 1 oz this is very satisfactory for ultra lightweight camping. Rob Thats why I use a clearish epoxy. Its actually pretty good,and I can add microballoons to make it white. As I said. setting it at a higher temperature than it will get in use, makes it pretty safe from that point of view. |
Waterproof glue for teapot?
I've used Araldite on a mug handle, and then run it through the
dishwasher. Many times. It copes fine with that. Andy |
Waterproof glue for teapot?
On 1 Feb, 21:13, Andy Champ wrote:
I've used Araldite on a mug handle, and then run it through the dishwasher. Many times. It copes fine with that. Andy I used Araldite on a large ceramic teapot handle twenty years ago and it's still going fine. Jonathan |
All times are GMT +1. The time now is 09:10 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter