Shower enclosure (660mm x 1200mm) - Desperate pls
 

Hi,

I have tried several companies to obtain quotes for a 660mm x 1200mm
shower enclosure. Unfortunately the room has to be that width (660mm)
for the shower tray. I tried to get a few quotes (3) in total and all
are coming up with a cost of £1000 pounds. I am astonished i cant get
something of this size for a reasonable price.

As a last ditch attempt, can anyone advise alternatives. The
constraint is it must be 660mm width (670 would probably be ok).

Many thanks

Shower enclosure (660mm x 1200mm) - Desperate pls
 

Shower enclosure (660mm x 1200mm) - Desperate pls
 

On Oct 29, 3:11 pm, Lobster wrote:
wrote:
I have tried several companies to obtain quotes for a 660mm x 1200mm
shower enclosure. Unfortunately the room has to be that width (660mm)
for the shower tray. I tried to get a few quotes (3) in total and all
are coming up with a cost of £1000 pounds. I am astonished i cant get
something of this size for a reasonable price.

As a last ditch attempt, can anyone advise alternatives. The
constraint is it must be 660mm width (670 would probably be ok).

Can you just explain it in a bit more detail... are you saying you
already have a tray, and need to buy an enclosure to fit round that? Or
have you yet to buy an appropriate tray?

What are the physical constraints in the room - eg an alcove?

What sort of enclosure are you looking at - something with a door and
two sides?

David

the narrowest preformed tray I've seen is 760mm , and that feels
claustrophic. So can we assume you are fitting a tiled floor with
drain? From memory I think the return panel of a standard enclosure
is held by self tappers , not welded.If this is the case a 1200x760
enclosure frame could be cut down and a new glass of
600-670mm)safety glass bought form a glaziers.

Shower enclosure (660mm x 1200mm) - Desperate pls
 

wrote:

I have tried several companies to obtain quotes for a 660mm x 1200mm
shower enclosure. Unfortunately the room has to be that width (660mm)
for the shower tray. I tried to get a few quotes (3) in total and all
are coming up with a cost of £1000 pounds. I am astonished i cant get
something of this size for a reasonable price.

As a last ditch attempt, can anyone advise alternatives. The
constraint is it must be 660mm width (670 would probably be ok).

At its simplest all you need is a 1200 wide door/facing panel and a stud
wall on the side.

e.g.

http://cgi.ebay.co.uk/NEW-BATHROOM-S...QQcmdZViewItem

http://cgi.ebay.co.uk/ES20-1200-LUXU...QQcmdZViewItem


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

Shower enclosure (660mm x 1200mm) - Desperate pls
 

On 29 Oct, 14:17, wrote:
Hi,

I have tried several companies to obtain quotes for a 660mm x 1200mm
shower enclosure. Unfortunately the room has to be that width (660mm)
for the shower tray. I tried to get a few quotes (3) in total and all
are coming up with a cost of £1000 pounds. I am astonished i cant get
something of this size for a reasonable price.

As a last ditch attempt, can anyone advise alternatives. The
constraint is it must be 660mm width (670 would probably be ok).

Many thanks

Just to clarify it is just a tray i am after. The current tray is
660mm wide x 1200mm. It does not feel too bad with the size it is
because of the width.

Shower enclosure (660mm x 1200mm) - Desperate pls
 

replying to theregistry786, Joannemarie79 wrote:
Hi I need a tray 660mm wide, does anyone know where I can get one from.

--
for full context, visit https://www.homeownershub.com/uk-diy...ls-432734-.htm