|
Potterton Profile pilot light is always on
Hello All
Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive |
Potterton Profile pilot light is always on
"stompo" wrote in message oups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit |
Potterton Profile pilot light is always on
On Wed, 22 Aug 2007 08:03:14 -0700, stompo wrote:
Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive Looks like it must be a sticking gas valve. Turn off the gas and get the gas valve replaced. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html |
Potterton Profile pilot light is always on
In message , NikV
writes "stompo" wrote in message roups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff |
Potterton Profile pilot light is always on
In article ,
Ed Sirett writes: On Wed, 22 Aug 2007 08:03:14 -0700, stompo wrote: Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Looks like it must be a sticking gas valve. Turn off the gas and get the gas valve replaced. I'm surprised it will go through the ignition sequence. I thought most boilers checked there was no pilot flame sense electrode conduction before starting the ignition sequence, to ensure the ignition sense electrode is not shorted out by dirt rather than sensing ignition. Maybe the Profile is too old for that check. -- Andrew Gabriel [email address is not usable -- followup in the newsgroup] |
Potterton Profile pilot light is always on
"raden" wrote in message ... In message , NikV writes "stompo" wrote in message groups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ...... |
Potterton Profile pilot light is always on
"NikV" wrote in message ... "raden" wrote in message ... In message , NikV writes "stompo" wrote in message egroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ..... btw its sometinmes called the thermocoupler (not thermocouple) or pilot latch assembly - like here http://www.applianceaid.com/dryer_pilot.html |
Potterton Profile pilot light is always on
"NikV" wrote in message ... "NikV" wrote in message ... "raden" wrote in message ... In message , NikV writes "stompo" wrote in message legroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ..... btw its sometinmes called the thermocoupler (not thermocouple) or pilot latch assembly - like here http://www.applianceaid.com/dryer_pilot.html or wikipedia http://en.wikipedia.org/wiki/Pilot_light number 3 on the list |
Potterton Profile pilot light is always on
In message , NikV
writes "raden" wrote in message ... In message , NikV writes "stompo" wrote in message egroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - Yes, but your antiquated POS is not a Profile, is it ? The profile has electronic ignition, it goes through an ignition sequence and the pilot valve is only operated once the air pressure switch has established that the fan is generating a sufficient pressure differential, and the pcb senses that pilot flame before operating the main gas solenoid what you wrote was wrong and potentially dangerous information -- geoff |
Potterton Profile pilot light is always on
In message , NikV
writes its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ..... btw its sometinmes called the thermocoupler (not thermocouple) or pilot latch assembly - like here http://www.applianceaid.com/dryer_pilot.html or wikipedia http://en.wikipedia.org/wiki/Pilot_light number 3 on the list Oh do **** off -- geoff |
Potterton Profile pilot light is always on
In message , Andrew Gabriel
writes In article , Ed Sirett writes: On Wed, 22 Aug 2007 08:03:14 -0700, stompo wrote: Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Looks like it must be a sticking gas valve. Turn off the gas and get the gas valve replaced. I'm surprised it will go through the ignition sequence. I thought most boilers checked there was no pilot flame sense electrode conduction before starting the ignition sequence, to ensure the ignition sense electrode is not shorted out by dirt rather than sensing ignition. Maybe the Profile is too old for that check. And, if anyone should know the answer to that one, its me isn't it I have a feeling you're right, I'll check tomorrow -- geoff |
Potterton Profile pilot light is always on
"raden" wrote in message ... In message , NikV writes its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ..... btw its sometinmes called the thermocoupler (not thermocouple) or pilot latch assembly - like here http://www.applianceaid.com/dryer_pilot.html or wikipedia http://en.wikipedia.org/wiki/Pilot_light number 3 on the list Oh do **** off -- geoff what an intellect wow ..... |
Potterton Profile pilot light is always on
"raden" wrote in message ... In message , NikV writes "raden" wrote in message ... In message , NikV writes "stompo" wrote in message legroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - Yes, but your antiquated POS is not a Profile, is it ? The profile has electronic ignition, it goes through an ignition sequence and the pilot valve is only operated once the air pressure switch has established that the fan is generating a sufficient pressure differential, and the pcb senses that pilot flame before operating the main gas solenoid what you wrote was wrong and potentially dangerous information now that clear and lucid explanation wasn't too difficult was it - why did we have all the f**k off , b*ll*cks when that would have done nicely ?? |
Potterton Profile pilot light is always on
In message , NikV
writes "raden" wrote in message ... In message , NikV writes its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ..... btw its sometinmes called the thermocoupler (not thermocouple) or pilot latch assembly - like here http://www.applianceaid.com/dryer_pilot.html or wikipedia http://en.wikipedia.org/wiki/Pilot_light number 3 on the list Oh do **** off -- geoff what an intellect wow ..... No, it's sound advice to a clueless ****wit -- geoff |
Potterton Profile pilot light is always on
In message , NikV
writes "raden" wrote in message ... In message , NikV writes "raden" wrote in message ... In message , NikV writes "stompo" wrote in message glegroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - Yes, but your antiquated POS is not a Profile, is it ? The profile has electronic ignition, it goes through an ignition sequence and the pilot valve is only operated once the air pressure switch has established that the fan is generating a sufficient pressure differential, and the pcb senses that pilot flame before operating the main gas solenoid what you wrote was wrong and potentially dangerous information now that clear and lucid explanation wasn't too difficult was it - why did we have all the f**k off , b*ll*cks when that would have done nicely ?? Because I enjoy it, m'kay ? -- geoff |
Potterton Profile pilot light is always on
"raden" wrote in message ... In message , NikV writes "raden" wrote in message ... In message , NikV writes "raden" wrote in message ... In message , NikV writes "stompo" wrote in message oglegroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - Yes, but your antiquated POS is not a Profile, is it ? The profile has electronic ignition, it goes through an ignition sequence and the pilot valve is only operated once the air pressure switch has established that the fan is generating a sufficient pressure differential, and the pcb senses that pilot flame before operating the main gas solenoid what you wrote was wrong and potentially dangerous information now that clear and lucid explanation wasn't too difficult was it - why did we have all the f**k off , b*ll*cks when that would have done nicely ?? Because I enjoy it, m'kay ? and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) |
Potterton Profile pilot light is always on
In message , NikV
writes "raden" wrote in message ... In message , NikV writes "raden" wrote in message ... In message , NikV writes "raden" wrote in message ... In message , NikV writes "stompo" wrote in message ooglegroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - Yes, but your antiquated POS is not a Profile, is it ? The profile has electronic ignition, it goes through an ignition sequence and the pilot valve is only operated once the air pressure switch has established that the fan is generating a sufficient pressure differential, and the pcb senses that pilot flame before operating the main gas solenoid what you wrote was wrong and potentially dangerous information now that clear and lucid explanation wasn't too difficult was it - why did we have all the f**k off , b*ll*cks when that would have done nicely ?? Because I enjoy it, m'kay ? and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) That's because you are - and then you pushed it to prove it beyond doubt -- geoff |
Potterton Profile pilot light is always on
"raden" wrote in message ... and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) That's because you are - and then you pushed it to prove it beyond doubt amazing how comunicative you can be with resorting to abuse - it must be good for you :-) |
Potterton Profile pilot light is always on
On Wed, 22 Aug 2007 20:25:17 +0100, NikV wrote:
"raden" wrote in message ... In message , NikV writes "stompo" wrote in message egroups.com... Hello All Does anybody have any ideas why the pilot light on my profile 50e never goes out - even if I switch off the electric? My guess is the pilot gas valve is either sticking or worn out. The boiler fires up as normal, with both solenoids click and clunking. There are no ignition clicks though - but I guess thats because the pilot flame has already been detected. Is there anything I can do to fix the problem? I'm pretty capable and have fixed other parts of the boiler but I don't want to have to mess with the gas supply for obvious reasons! Thanks Clive its normal ! if you turn the gas off and let the thermo-valve cool down and switch the gas on the pilot ligh will need to be re-lit Is it **** normal, don't talk ******** The gas valve is letting by for some reason and needs replacing If the volts are removed from the pilot valve solenoid, it should close and no gas should pass through -- geoff on my potterton the boiler can stay unplugged and the pilot lght stays on - there is a thermo based valve wich lets gas through for the pilot light - this is the third central heating boiler (in 3/4 houses) that works this way the other had an on demand piezo ignition, if the gas supply is cut the valve closes and you have to do the 'turn knob ignite woth piezo and hold for 30 seconds to ensure the pilot valve stays open - I can probably find the diagram from the GCSE physics book which sjows the general principle ..... It might come as a surprise to you that Potterton make and have made a large range of boilers. Most of which have not used permanent pilot lights and themoelectric valves for the last 15 years. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html |
Potterton Profile pilot light is always on
In message , NikV
writes "raden" wrote in message ... and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) That's because you are - and then you pushed it to prove it beyond doubt amazing how comunicative you can be with resorting to abuse - it must be good for you :-) When someone tells someone who has what amounts to a gas leak that it's normal ? - clueless ****wit about sums you up -- geoff |
Potterton Profile pilot light is always on
"raden" wrote in message ... In message , NikV writes "raden" wrote in message ... and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) That's because you are - and then you pushed it to prove it beyond doubt amazing how comunicative you can be with resorting to abuse - it must be good for you :-) When someone tells someone who has what amounts to a gas leak that it's normal ? - clueless ****wit about sums you up ah poor dear, was it another difficult day - back to the abuse again (oh I remember its because you can) - I wonder what else you do 'because you can') perhaps later you'll feel more mellow :-) quite surpising though that the more technology seems to provide a fail dangerous leak - probably the same design team that produced pcb which neeeding replacing so often .... |
Potterton Profile pilot light is always on
On 23 Aug, 19:39, "NikV" wrote:
"raden" wrote in message ... In message , NikV writes "raden" wrote in message ... and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) That's because you are - and then you pushed it to prove it beyond doubt amazing how comunicative you can be with resorting to abuse - it must be good for you :-) When someone tells someone who has what amounts to a gas leak that it's normal ? - clueless ****wit about sums you up ah poor dear, was it another difficult day - back to the abuse again (oh I remember its because you can) - I wonder what else you do 'because you can') perhaps later you'll feel more mellow :-) quite surpising though that the more technology seems to provide a fail dangerous leak - probably the same design team that produced pcb which neeeding replacing so often ....- Hide quoted text - - Show quoted text - Having started out by launching into a subject about which you patently know very little and advising the OP that a malfunctioning gas valve is normal, I suggest the best thing you can do is stop digging the hole you have dropped yourself into. Geoff has been surprisingly patient with you considering the danger which following your ill considered first response might have created. Ed tried to explain to you that just because your old boiler had a permanent pilot doesn't mean newer interrupted pilot models were the same and yet you still keep on sniping away. Take a bit of advice, shut up on this subject and learn from Geoff who group regulars know is familiar with the sequence controls and PCBs of nearly every boiler presently marketed in the UK and most of the ones still installed but no longer made. |
Potterton Profile pilot light is always on
In message , NikV
writes "raden" wrote in message ... In message , NikV writes "raden" wrote in message ... and you called me the clueless f*ckwit, think you've demonstrated that adequately now :-) That's because you are - and then you pushed it to prove it beyond doubt amazing how comunicative you can be with resorting to abuse - it must be good for you :-) When someone tells someone who has what amounts to a gas leak that it's normal ? - clueless ****wit about sums you up ah poor dear, was it another difficult day - back to the abuse again (oh I remember its because you can) - I wonder what else you do 'because you can') perhaps later you'll feel more mellow :-) No, I'm just naturally abusive to eejits - in English, Malay or whatever language quite surpising though that the more technology seems to provide a fail dangerous leak - probably the same design team that produced pcb which neeeding replacing so often .... ****ed if I have the slightest idea what you're waffling on about there -- geoff |
Potterton Profile pilot light is always on
"cynic" wrote in message ps.com... On 23 Aug, 19:39, "NikV" wrote: snip whilst agreeing with your sentiments re the advice to the op it seems that most of the comments refer to the inability of some to say anything without swearing |
Potterton Profile pilot light is always on
In message , Ageless
writes "cynic" wrote in message ups.com... On 23 Aug, 19:39, "NikV" wrote: snip whilst agreeing with your sentiments re the advice to the op it seems that most of the comments refer to the inability of some to say anything without swearing Sorry, I don't suffer fools especially those who don't stop when they have given incorrect and dangerous advice, but then follow it up with more stupidity Lets not forget, he was in effect telling the OP that the gas leak (through the pilot valve) was perfectly normal because he's a clueless ****wit (others might use other words) and if you don't like it ... -- geoff |
| All times are GMT +1. The time now is 09:36 AM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter