Sealing between slabs
 

Have just finished laying some slabs.

Question is, what sort of screed, mix or whatever do I need to fill in
spaces between slabs?

jamesy

Sealing between slabs
 

jamesy wrote:
Have just finished laying some slabs.

Question is, what sort of screed, mix or whatever do I need to fill in
spaces between slabs?

jamesy


I used 6:1 sand cement.

Weeds still manage to germinate on it though.

Sealing between slabs
 

jamesy wrote:
Have just finished laying some slabs.

Question is, what sort of screed, mix or whatever do I need to fill in
spaces between slabs?

jamesy



I use the B&Q gen purpose mortar (Hansen brand). Sweep it over the slabs
dry, push it down tight with a piece of wood, brush off the faces, and
use a watering can with a rose to wet it.

Sealing between slabs
 

Stuart Noble wrote:
jamesy wrote:
Have just finished laying some slabs.

Question is, what sort of screed, mix or whatever do I need to fill
in spaces between slabs?

jamesy



I use the B&Q gen purpose mortar (Hansen brand). Sweep it over the
slabs dry, push it down tight with a piece of wood, brush off the
faces, and use a watering can with a rose to wet it.

Doesn't that cause splashes which stain the slabs?


--
Dave
The Medway Handyman
www.medwayhandyman.co.uk
01634 717930
07850 597257

Sealing between slabs
 

The Medway Handyman wrote:
Stuart Noble wrote:
jamesy wrote:
Have just finished laying some slabs.

Question is, what sort of screed, mix or whatever do I need to fill
in spaces between slabs?

jamesy


I use the B&Q gen purpose mortar (Hansen brand). Sweep it over the
slabs dry, push it down tight with a piece of wood, brush off the
faces, and use a watering can with a rose to wet it.

Doesn't that cause splashes which stain the slabs?



Not with a rose. A spray can be used but it's hard work, and there's a
danger that only the surface gets wet

Sealing between slabs
 

On Aug 20, 4:25 pm, "jamesy" wrote:
Have just finished laying some slabs.

Question is, what sort of screed, mix or whatever do I need to fill in
spaces between slabs?

jamesy

4:1 building sand:cement, plenty of black die, with plenty of good
plasticiser, mix it quite stuff, and work carefully.

This is the mix I made for SHMBO to do our slate floor slabs & it
looks great.

Rick