Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Draper R850V Router failed speed control (power electronics question)
I have a Draper R850V router. After many years use the speed control failed
this morning. Taking off the top to reveal the "gubbins" I see all the control electronics is potted in resin. My instinct is to change the Triac (BTB12) as I reckon this must have failed. Is this a good diagnosis? Could it be something else? I don't see that a repair I do can be any other than a bit of a bodge.....are there people out there who sell the whole control assembly? Pic he http://www.hernibles.com/router.jpg TIA for any help or opinions. David |
#2
Posted to uk.d-i-y
|
|||
|
|||
Draper R850V Router failed speed control (power electronics question)
On 30 Jun, 10:44, "Vortex" wrote:
I have a Draper R850V router. After many years use the speed control failed this morning. Taking off the top to reveal the "gubbins" I see all the control electronics is potted in resin. My instinct is to change the Triac (BTB12) as I reckon this must have failed. Is this a good diagnosis? Could it be something else? I don't see that a repair I do can be any other than a bit of a bodge.....are there people out there who sell the whole control assembly? Pic he http://www.hernibles.com/router.jpg TIA for any help or opinions. David triac is the most likely candidate. No gtees of course. NT |
#3
Posted to uk.d-i-y
|
|||
|
|||
Draper R850V Router failed speed control (power electronics question)
wrote in message ups.com... On 30 Jun, 10:44, "Vortex" wrote: I have a Draper R850V router. After many years use the speed control failed this morning. Taking off the top to reveal the "gubbins" I see all the control electronics is potted in resin. My instinct is to change the Triac (BTB12) as I reckon this must have failed. Is this a good diagnosis? Could it be something else? I don't see that a repair I do can be any other than a bit of a bodge.....are there people out there who sell the whole control assembly? Pic he http://www.hernibles.com/router.jpg TIA for any help or opinions. David triac is the most likely candidate. No gtees of course. NT Thanks for confirming my thought. Well the Triac is a BTB12-600BW Went to Maplins and the closest match I could find was BTA16-600B so at £1.60 I purchased it! Doesn't work at all now (previously full speed only. No speed control!) I believe the issue is the "W" so will order the exact correct component and see if that makes a difference. Have now discovered Draper web site has parts lists and exploded diagrams. Fantastic! Rather than fanny about with soldering irons I'll email them and buy the whole PCB. David |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Router speed control for shop-vac? | Woodworking | |||
Variac as router speed control? | Woodworking | |||
Router Speed Control Problem | Woodworking | |||
Router Speed Control - How does this work? | Metalworking | |||
Anyone used the external router speed control | Woodworking |