DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Soil pipe connection (https://www.diybanter.com/uk-diy/1962-soil-pipe-connection.html)

Neil D. September 15th 03 10:02 PM

Soil pipe connection
 
Hi,

Got a bit of a tricky one here.

I'm trying to connect some new type PVC soil pipe and fittings to the
existing stuff in my house.

Its a concealed soil pipe in a 30-40 year old ex council house.

There is a T which has no seal..... and the pipe which comes into its flange
has a groove and an O ring.

The new pipe is 110mm O/D and the I/D of the T into the existing soil pipe
is about 133mm.

Does anyone have a suggestion on how i can get a proper sealed join between
these 2 different types?

Thanks

Neil D.



dg September 15th 03 11:05 PM

Soil pipe connection
 
You can get adapters to fit - most manufacturers should have one - even if
it's one of the rubber ones with the big jubilee clip.

I would only caution that many pipes in old council houses are made from
asbestos, so make sure you don't breathe any dust when cutting.

dg


"Neil D." wrote in message
...
Hi,

Got a bit of a tricky one here.

I'm trying to connect some new type PVC soil pipe and fittings to the
existing stuff in my house.

Its a concealed soil pipe in a 30-40 year old ex council house.

There is a T which has no seal..... and the pipe which comes into its

flange
has a groove and an O ring.

The new pipe is 110mm O/D and the I/D of the T into the existing soil pipe
is about 133mm.

Does anyone have a suggestion on how i can get a proper sealed join

between
these 2 different types?

Thanks

Neil D.




BigWallop September 15th 03 11:11 PM

Soil pipe connection
 

"Neil D." wrote in message
...
Hi,

Got a bit of a tricky one here.

I'm trying to connect some new type PVC soil pipe and fittings to the
existing stuff in my house.

Its a concealed soil pipe in a 30-40 year old ex council house.

There is a T which has no seal..... and the pipe which comes into its

flange
has a groove and an O ring.

The new pipe is 110mm O/D and the I/D of the T into the existing soil pipe
is about 133mm.

Does anyone have a suggestion on how i can get a proper sealed join

between
these 2 different types?

Thanks

Neil D.



The 133mm opening your looking at isn't just a spigot end with a rubber "O"
ring is it ? Or is the down pipe an old cast iron one ?


---
http://www.basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.518 / Virus Database: 316 - Release Date: 11/09/03




All times are GMT +1. The time now is 10:44 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter