Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Soil pipe connection
Hi,
Got a bit of a tricky one here. I'm trying to connect some new type PVC soil pipe and fittings to the existing stuff in my house. Its a concealed soil pipe in a 30-40 year old ex council house. There is a T which has no seal..... and the pipe which comes into its flange has a groove and an O ring. The new pipe is 110mm O/D and the I/D of the T into the existing soil pipe is about 133mm. Does anyone have a suggestion on how i can get a proper sealed join between these 2 different types? Thanks Neil D. |
#2
|
|||
|
|||
Soil pipe connection
You can get adapters to fit - most manufacturers should have one - even if
it's one of the rubber ones with the big jubilee clip. I would only caution that many pipes in old council houses are made from asbestos, so make sure you don't breathe any dust when cutting. dg "Neil D." wrote in message ... Hi, Got a bit of a tricky one here. I'm trying to connect some new type PVC soil pipe and fittings to the existing stuff in my house. Its a concealed soil pipe in a 30-40 year old ex council house. There is a T which has no seal..... and the pipe which comes into its flange has a groove and an O ring. The new pipe is 110mm O/D and the I/D of the T into the existing soil pipe is about 133mm. Does anyone have a suggestion on how i can get a proper sealed join between these 2 different types? Thanks Neil D. |
#3
|
|||
|
|||
Soil pipe connection
"Neil D." wrote in message ... Hi, Got a bit of a tricky one here. I'm trying to connect some new type PVC soil pipe and fittings to the existing stuff in my house. Its a concealed soil pipe in a 30-40 year old ex council house. There is a T which has no seal..... and the pipe which comes into its flange has a groove and an O ring. The new pipe is 110mm O/D and the I/D of the T into the existing soil pipe is about 133mm. Does anyone have a suggestion on how i can get a proper sealed join between these 2 different types? Thanks Neil D. The 133mm opening your looking at isn't just a spigot end with a rubber "O" ring is it ? Or is the down pipe an old cast iron one ? --- http://www.basecuritysystems.no-ip.com Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.518 / Virus Database: 316 - Release Date: 11/09/03 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Saniflow : Coupling copper pipe to soil stack | UK diy | |||
Converting soil pipe access panel to allow 40mm pipe | UK diy | |||
cutting a hole in a cast iron soil pipe | UK diy | |||
cutting soil pipe | UK diy | |||
cutting soil pipe | UK diy |