|
Low energy light bulbs - comparison
Like most people, I guess,I'm working on changing as many of my lamps to
low energy. The great deep-thinking ones are thinking of banning the sale of filament lamps anyway. I made a spreadsheet that showed I was using about £250 a year on lights (big house). This should come down to about £80 with LE, after allowing for not being able to dim them. Problem is I need to change several light fittings and buy new free-standing ones for reading etc. I don't want to do this until I know more about the the sizes, output and light colour of the bulbs. I've looked at various suppliers sites thrown up by Google, and the suppliers I use for electrical bits, but the data is very limited. Short of buying one of each lamp and testing them myself I'm not sure how to proceed. Its not like a thermostat or a piece of pipe. Lighting is an important part of the design of a room, so I want to get it right. Has this topic been discussed on this ng lately? I've not browsed it for a while. The uk.d-i-y faq has no information like this. Does anyone know of another faq or info site? If not would people be willing to share their findings? I would be happy to put together a spreadsheet and recordset of the findings if they appeared to be consistent and useful (maybe I'll regret saying that!). I could put this on my website with a link on the faq or it might go on the faq itself. What do people think? Peter Scott |
Low energy light bulbs - comparison
I'm sort of answering my own question. I have found three sites that
have more detailed information on them including colour temperature and physical size: www.lightbulbs-direct.com www.bltdirect.com www.yourwelcome.co.uk Der... That'll teach me to check *again* on Google before I post! Anyway, I hope someone might find the addresses useful. I guess a faq is not needed? If not would people be willing to share their findings? I would be happy to put together a spreadsheet and recordset of the findings if they appeared to be consistent and useful (maybe I'll regret saying that!). I could put this on my website with a link on the faq or it might go on the faq itself. What do people think? Peter Scott |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 09:02:41 +0000, Peter Scott wrote:
If not would people be willing to share their findings? I would be happy to put together a spreadsheet and recordset of the findings if they appeared to be consistent and useful I think the biggest problem will be the rather subjective comments people make. Some just don't like 'em, others are quite happy. What would be useful is something that tabulates the make/model, rated power & lumens output for each lamp and (in an ideal world) the real lumen ouput at switch on from cold, at 1, 2, 5 and 10 mins, the colour temperature once warm and if they start with or without a flicker. The latter half would require an awful lot of effort though and decent measuring kit. The first bit could be done by looking at the packaging as most, if not all, lamps now have that info on them. There are a lot of lamps out there but if a few people spent just 5 or 10 mins in the supermarket/DIY Shed WHY making a note of the rating of all the lamps then sent that information to a central point for collation it wouldn't be to much for any single person to do, apart from collator! Mind you it wouldn't be that hard to have a web interface to allow people to input their findings. -- Cheers Dave. pam is missing e-mail |
Low energy light bulbs - comparison
Peter Scott wrote:
I'm sort of answering my own question. I have found three sites that have more detailed information on them including colour temperature and physical size: www.lightbulbs-direct.com www.bltdirect.com www.yourwelcome.co.uk Der... That'll teach me to check *again* on Google before I post! Anyway, I hope someone might find the addresses useful. I guess a faq is not needed? If not would people be willing to share their findings? I would be happy to put together a spreadsheet and recordset of the findings if they appeared to be consistent and useful (maybe I'll regret saying that!). I could put this on my website with a link on the faq or it might go on the faq itself. What do people think? Peter Scott I think a faq is needed, this is a common question. IME there are good, so-so and oh-no. I've had good experiences with Osram, the toolstation ones were all so so but not the best light quality, Philips I've not been tempted to buy any more, and the one poundland one I bought out of curiosity was dire. If you write something, here's a good place for it: http://wiki.diyfaq.org.uk/index.php?...ecial:Allpages NT |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 09:02:41 +0000 someone who may be Peter Scott
wrote this:- Problem is I need to change several light fittings and buy new free-standing ones for reading etc. I don't want to do this until I know more about the the sizes, output and light colour of the bulbs. The sizes are stated in various places. They range from lamps no larger than GLS lamps to ones considerably larger. Some are also considerably heavier, which may be of concern in some fittings. Output and light colour is to some extent a matter of personal prejudice. Some will swear blind that such lamps are dim, take too long to warm up, are no good for almost anything and the available figures on output and colour are all wrong. On the other hand some have been using such lamps since the 1980s, have now got them almost everywhere and don't see why some make a fuss about them. Has this topic been discussed on this ng lately? There are search engines to answer that question. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
Peter Scott formulated on Thursday :
Problem is I need to change several light fittings and buy new free-standing ones for reading etc. I don't want to do this until I know more about the the sizes, output and light colour of the bulbs. I've looked at various suppliers sites thrown up by Google, and the suppliers I use for electrical bits, but the data is very limited. Short of buying one of each lamp and testing them myself I'm not sure how to proceed. Its not like a thermostat or a piece of pipe. Lighting is an important part of the design of a room, so I want to get it right. You should only consider using the low energy lamps where the light is turned on and left on for a sensible period of time - for all other uses ordinary filament lamps are best for both electrical economy and lamp replacement economy, initial cost and you get 100% light output as soon as switched on. The low energy lamps just don't survive very long if frequently switched, filament lamps are much better for this type of use. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
Low energy light bulbs - comparison
In message , Peter Scott
writes I'm sort of answering my own question. I have found three sites that have more detailed information on them including colour temperature and physical size: www.lightbulbs-direct.com You have solved my problem at least:-) Compact gs23 9 watt fluorescents are only available in warm white from my local outlets. We have a low ceiling in our kitchen and use recessed twin lamps. Even with 5 units SWMBO is not happy. I tried changing the opaque cover but she wasn't happy with that either. Cool white from the above should do it. regards -- Tim Lamb |
Low energy light bulbs - comparison
On 2007-01-18 09:02:41 +0000, Peter Scott said:
Like most people, I guess,I'm working on changing as many of my lamps to low energy. Really? Not based on shelf space devoted to them in most stores. The great deep-thinking ones are thinking of banning the sale of filament lamps anyway. I think you mean small minded people who like to interfere in the freedom of choice of others. I made a spreadsheet that showed I was using about £250 a year on lights (big house). This should come down to about £80 with LE, after allowing for not being able to dim them. I find that surprising. I also have a considerable number of lamps - almost all tungsten of one technology or another and don't get to anything like this figure. If not would people be willing to share their findings? I would be happy to put together a spreadsheet and recordset of the findings if they appeared to be consistent and useful (maybe I'll regret saying that!). I could put this on my website with a link on the faq or it might go on the faq itself. What do people think? I think that the exercise is pointless. I haven't yet found any low energy lamps that I would entertain having in the house. I find the light quality poor and colour rendition obtained distinctly artificial looking and strange to the point of having a bilious effect. The amount of energy saved I don't think is worth the effort just in the context of lamp use, especially when mechanics and light suitability are also taken into account, and in comparison with other energy saving measures, it's really not worth bothering. |
Low energy light bulbs - comparison
Dave Liquorice wrote:
On Thu, 18 Jan 2007 09:02:41 +0000, Peter Scott wrote: If not would people be willing to share their findings? I would be happy to put together a spreadsheet and recordset of the findings if they appeared to be consistent and useful I think the biggest problem will be the rather subjective comments people make. Some just don't like 'em, others are quite happy. What would be useful is something that tabulates the make/model, rated power & lumens output for each lamp and (in an ideal world) the real lumen ouput at switch on from cold, at 1, 2, 5 and 10 mins, the colour temperature once warm and if they start with or without a flicker. The latter half would require an awful lot of effort though and decent measuring kit. The first bit could be done by looking at the packaging as most, if not all, lamps now have that info on them. You're assuming that manufacturers don't speak with forked tongues. In my experience, rated equivalence doesn't begin to come near that of a conventional incandescent bulb. Sure, if you're prepared to dig though the small print you sometimes find weasel words mentioning that they're actually equivalent to "soft tone" bulbs but who the heck buys them? Having said all that I was tempted by an offer in Tesco the other day (11W GE bulbs for 19p each). I then spent the next couple of hours converting a pendant in the hall to taking two of these bulbs. The output is almost acceptable now. Tim |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 10:04:03 GMT someone who may be Harry Bloomfield
wrote this:- You should only consider using the low energy lamps where the light is turned on and left on for a sensible period of time That was the advice when such lamps came out, but things have moved on since then. The low energy lamps just don't survive very long if frequently switched, Ditto. I have had a low energy bulb in a toilet for I suppose getting on for a decade now. It is often just switched on for a few minutes. It was still working fine this morning. Some designs of low energy bulb are better than others in this duty cycle, just like some designs of GLS bulb are. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
David Hansen wrote :
Ditto. I have had a low energy bulb in a toilet for I suppose getting on for a decade now. It is often just switched on for a few minutes. It was still working fine this morning. Some designs of low energy bulb are better than others in this duty cycle, just like some designs of GLS bulb are. So the advantage of putting a relatively expensive low energy lamp in such a location would be what exactly? You do not save much if any energy if it is only turned on for a couple of minutes and the manufacturing process is not very green when compared to an ordinary cheap filament lamp. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
Low energy light bulbs - comparison
Dave Liquorice wrote:
any single person to do, apart from collator! Mind you it wouldn't be that hard to have a web interface to allow people to input their findings. we have, http://wiki.diyfaq.org.uk/index.php?...ecial:Allpages and http://wiki.diyfaq.org.uk/index.php?title=CFL_Lamps NT |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 13:06:36 GMT someone who may be Harry Bloomfield
wrote this:- Some designs of low energy bulb are better than others in this duty cycle, just like some designs of GLS bulb are. So the advantage of putting a relatively expensive low energy lamp in such a location would be what exactly? Not having to replace the bulb so often. Reducing greenhouse gas emissions. You do not save much if any energy if it is only turned on for a couple of minutes One will indeed only save a little energy over the space of a few minutes. However, little things add up over the years. and the manufacturing process is not very green when compared to an ordinary cheap filament lamp. That would be a factor, if both types of bulb lasted for the same time and used the same energy. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
David Hansen wrote:
-- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 WTF does this mean exactly? Perhaps it's me, but it sounds like a pompous lot of old ********. Wiki woo to one and all. Des Kay xx |
Low energy light bulbs - comparison
Anita Palley wrote:
David Hansen wrote: I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 WTF does this mean exactly? Perhaps it's me, but it sounds like a pompous lot of old ********. You dont even know what it means, yet you know its pompous and ********. You must be a youngun to think that makes sense. NT |
Low energy light bulbs - comparison
David Hansen explained :
Not having to replace the bulb so often. Reducing greenhouse gas emissions. On/off type of use is a killer for discharge type lights and they do not achieve the full light output until a time after you would normally be turning it off again. You do not save much if any energy if it is only turned on for a couple of minutes One will indeed only save a little energy over the space of a few minutes. However, little things add up over the years. True, but you need to do the sums for what would be saved over the years v the extra cost of the lamps and their reduced life from the frequent switching. and the manufacturing process is not very green when compared to an ordinary cheap filament lamp. That would be a factor, if both types of bulb lasted for the same time and used the same energy. Discharge lamps only achieve economy once they have been turned on for a while. I once saw the calculations for the short period use of a fluorescent light versus an equivalent output filament lamp - taking in all of the factors such as wear and tear, consumption, cost of labour replacing etc.. The filament lamp proved to be more economic upto 1 hours use. Before installing these types of energy saving lamps and flourescents, I make a decision as to whether the extra expense is worth while for the type of use the room receives. Economy is not always factored in, because sometimes fluorescent provides a more suitable light to a filament light. I have around 70' of fluorescent lighting in my garage, this despite a small proportion being frequently switched, because this type of lighting is more suitable for this type of use. -- Regards, Harry (M1BYT) (L) http://www.ukradioamateur.co.uk |
Low energy light bulbs - comparison
"Harry Bloomfield" wrote in message
... Discharge lamps only achieve economy once they have been turned on for a while. I once saw the calculations for the short period use of a fluorescent light versus an equivalent output filament lamp - taking in all of the factors such as wear and tear, consumption, cost of labour replacing etc.. The filament lamp proved to be more economic upto 1 hours use. How long ago were you looking at these calculations? CFLs are now really very cheap, and I suspect rather more reliable than several years ago. cheers, clive |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 15:35:20 GMT someone who may be Harry Bloomfield
wrote this:- On/off type of use is a killer for discharge type lights That was the case. However, things have moved on and it is not as great a factor as it once was. and they do not achieve the full light output until a time after you would normally be turning it off again. Ditto. I once saw the calculations for the short period use of a fluorescent light versus an equivalent output filament lamp Presumably you are talking about linear tubes, rather then compact fluorescents. What sort of control gear?. I have seen such calculations too, but such calculations in 1966 would be different to those in 2006. Before installing these types of energy saving lamps and flourescents, I make a decision as to whether the extra expense is worth while for the type of use the room receives. For the sake of argument I won't challenge your "extra expense" assertion here. Do you think you are the only person who makes such decisions? Do you think that others might reach different decisions, or are your decisions the only ones that can be made? -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
Harry Bloomfield wrote:
Discharge lamps only achieve economy once they have been turned on for a while. I once saw the calculations for the short period use of a fluorescent light versus an equivalent output filament lamp - taking in all of the factors such as wear and tear, consumption, cost of labour replacing etc.. The filament lamp proved to be more economic upto 1 hours use. Either the figures you looked at were grossly inaccurate, or perhaps they were correct decades ago. NT |
Low energy light bulbs - comparison
Andy Hall wrote:
On 2007-01-18 09:02:41 +0000, Peter Scott said: Like most people, I guess,I'm working on changing as many of my lamps to low energy. it's really not worth bothering. No bother is involved, CFL relamping uses less total bother than filament. NT |
Low energy light bulbs - comparison
Andy Hall wrote:
On 2007-01-18 09:02:41 +0000, Peter Scott said: Like most people, I guess,I'm working on changing as many of my lamps to low energy. it's really not worth bothering. No bother is involved, CFL relamping uses less total bother than filament. When you factor in the number of hours you ahve to work to pay the run costs, CFLs are way less bother. NT |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 10:12:43 +0000, Andy Hall
wrote: I haven't yet found any low energy lamps that I would entertain having in the house. I find the light quality poor and colour rendition obtained distinctly artificial looking and strange to the point of having a bilious effect. I wonder what makes someone dislike the above so much whilst others can use them without any 'issues' Andy (genuine question). Our main living room is generally lit by one CFL laying on a bit of foil on a high shelf. It's on a time switch, comes on at dusk (10 mins after the electric curtains close) and off at 12:30 ish. That lamp has been up there for *ages*. The main center light has a filament lamp in it because I haven't found a suitable (sized) CFL replacement yet. Dusk to dawn 9W CFL's in the front and rear lobby (they illuminate the entire hall / kitchen and seem *very* bright when we come down in the night), CFL's in bathroom, toilet, landing, dining room, middle bedroom, Daughters room. Our bed room still has filament for the same reasons as below. Twin flouro's in the kitchen. Bottom line, we switch them on, they light up, we do our thing, rarely needing to supplement these lights with anything else. Are we just 'coping', don't think so. Are we interested in style over function or economy / environment (energy use / lamp life), no. Can't remember anyone coming in and commenting how dark it is in here or 'isn't that light a funny coloured ... shrug. When the 'fossils' do run out how will you cope with candle light or yer solar charged LED light Andy ;-) Horses for courses though I guess. All the best .. T i m p.s. I saw CFL based floodlight the other day .. I'm keeping my eye out for one locally as the 300W flood lamp that covered the back garden failed about 2 years ago ... |
Low energy light bulbs - comparison
On 2007-01-18 11:08:20 +0000, Kaiser Sose said:
I am one such person. Unless lights are to be switched on for hours at a time (such as my outside driveway lights) I think these energy saving light bulbs are a waste of time and money when used inside the home. They're horrible things and do not give the same light as a normal bulb, despite what all the so called experts (aka marketing people) say. If the light is only on for a an hour or so, (and often three minutes when you use the bog) the energy saving is minuscule - 40w or something? All the savings you'd get over a year or so are the equivalent of not having one or two baths. A paltry amount. Cut the central heating down a degree, stop using hairdryers so much etc, I am all for that. For a tiny few watts here and there for light bulbs? Waste of time. Absolutely agree. This is just a sop for people to think that they are doing something, done as a diversion from the real issues that actually do make a difference but which are considered to be too hard. My 2c, not to offend anyone elses opinions of course. I wouldn't worry too much about that. Opinions are like ani. Everybody has one. |
Low energy light bulbs - comparison
On 2007-01-18 12:56:42 +0000, David Hansen
said: On Thu, 18 Jan 2007 10:04:03 GMT someone who may be Harry Bloomfield wrote this:- You should only consider using the low energy lamps where the light is turned on and left on for a sensible period of time That was the advice when such lamps came out, but things have moved on since then. The low energy lamps just don't survive very long if frequently switched, Ditto. I have had a low energy bulb in a toilet for I suppose getting on for a decade now. It is often just switched on for a few minutes. It was still working fine this morning. Good location for one.... |
Low energy light bulbs - comparison
On 2007-01-18 13:06:36 +0000, Harry Bloomfield
said: David Hansen wrote : Ditto. I have had a low energy bulb in a toilet for I suppose getting on for a decade now. It is often just switched on for a few minutes. It was still working fine this morning. Some designs of low energy bulb are better than others in this duty cycle, just like some designs of GLS bulb are. So the advantage of putting a relatively expensive low energy lamp in such a location would be what exactly? You do not save much if any energy if it is only turned on for a couple of minutes and the manufacturing process is not very green when compared to an ordinary cheap filament lamp. You salve your conscience if you are gullible enough to be taken in by the hype surrounding all of this. |
Low energy light bulbs - comparison
On 2007-01-18 14:26:02 +0000, David Hansen
said: On Thu, 18 Jan 2007 13:06:36 GMT someone who may be Harry Bloomfield wrote this:- Some designs of low energy bulb are better than others in this duty cycle, just like some designs of GLS bulb are. So the advantage of putting a relatively expensive low energy lamp in such a location would be what exactly? Not having to replace the bulb so often. Reducing greenhouse gas emissions. You do not save much if any energy if it is only turned on for a couple of minutes One will indeed only save a little energy over the space of a few minutes. However, little things add up over the years. Incrementalism like this is a very weak argument |
Low energy light bulbs - comparison
On 2007-01-18 17:22:09 +0000, T i m said:
On Thu, 18 Jan 2007 10:12:43 +0000, Andy Hall wrote: I haven't yet found any low energy lamps that I would entertain having in the house. I find the light quality poor and colour rendition obtained distinctly artificial looking and strange to the point of having a bilious effect. I wonder what makes someone dislike the above so much whilst others can use them without any 'issues' Andy (genuine question). I know it's a genuine question. The genuine answer is that I find the light artificial and bilious. The minor cost savings, if any, are therefore irrelevant and the energy savings are not significant in the overall context of things that can be done. Our main living room is generally lit by one CFL laying on a bit of foil on a high shelf. It's on a time switch, comes on at dusk (10 mins after the electric curtains close) and off at 12:30 ish. That lamp has been up there for *ages*. The main center light has a filament lamp in it because I haven't found a suitable (sized) CFL replacement yet. Dusk to dawn 9W CFL's in the front and rear lobby (they illuminate the entire hall / kitchen and seem *very* bright when we come down in the night), CFL's in bathroom, toilet, landing, dining room, middle bedroom, Daughters room. Our bed room still has filament for the same reasons as below. Twin flouro's in the kitchen. Bottom line, we switch them on, they light up, we do our thing, rarely needing to supplement these lights with anything else. Are we just 'coping', don't think so. Are we interested in style over function or economy / environment (energy use / lamp life), no. Can't remember anyone coming in and commenting how dark it is in here or 'isn't that light a funny coloured ... shrug. When the 'fossils' do run out how will you cope with candle light or yer solar charged LED light Andy ;-) I don't buy into the argument that says that energy in the form of electricity needs to be saved. Replacing perfectly good technology in the form of tungsten lighting which most people do seem to prefer based on sales volumes really makes no sense; and when one learns that there is government sponsored coercion in terms of forcing the issue via building regulation, it is very clear that there is a rat. If one were to say that use of fossil fuel were the *only* way to produce electricity then that would make it a discussion point. Focus should be on alternative sources of supply for electricity such as nuclear fission and ultimately fusion generation and improving the technology around those further. Instead of this, we are presented with a "no gain without pain" argument which really holds no water at all; and which in effect, is very similar to the ancient practice of self flagellation as atonement for sin. If people want to buy these things and use them and if it makes them feel good, then that's fine. I don't feel about to follow suit because I find the aesthetics poor and the technical and ecological justifications questionable at best. As soon as the element of government compulsion comes into the mix with these weak justifications, I close the shutters. Horses for courses though I guess. All the best .. T i m p.s. I saw CFL based floodlight the other day .. I'm keeping my eye out for one locally as the 300W flood lamp that covered the back garden failed about 2 years ago ... One exterior application is the only one that I have found as an appropriate use for a CFL. I have a lantern outside which illuminates an area where the dustbins are stores. This is switched on only when I need to go out after dark to put rubbish in the bins and is switched off again afterwards. I don't care about the light quality for that but it is inconvenient to access the lantern to change a tungsten bulb. |
Low energy light bulbs - comparison
|
Low energy light bulbs - comparison
Andy Hall wrote:
On 2007-01-18 17:22:09 +0000, T i m said: On Thu, 18 Jan 2007 10:12:43 +0000, Andy Hall wrote: I haven't yet found any low energy lamps that I would entertain having in the house. I find the light quality poor and colour rendition obtained distinctly artificial looking and strange to the point of having a bilious effect. I wonder what makes someone dislike the above so much whilst others can use them without any 'issues' Andy (genuine question). I know it's a genuine question. The genuine answer is that I find the light artificial and bilious. The minor cost savings, if any, are therefore irrelevant and the energy savings are not significant in the overall context of things that can be done. Replacing perfectly good technology in the form of tungsten lighting which most people do seem to prefer based on sales volumes really makes no sense; and when one learns that there is government sponsored coercion in terms of forcing the issue via building regulation, it is very clear that there is a rat. I'd agree on the rat. The sensible way to make them more popular is to solve the problems, and this is simple to do. Why no cfl mfr has done it I dont know, maybe theyre too busy hiring monkeys for peanuts trying to compete on cost, so have no-one to sit back and ask how they can change the market and satisfy the customer better. p.s. I saw CFL based floodlight the other day .. I'm keeping my eye out for one locally as the 300W flood lamp that covered the back garden failed about 2 years ago ... I've not dealt with them.: http://www.eurobatteries.com/sitepag...entcompact.asp but CFLs upto 105w. NT |
Low energy light bulbs - comparison
The amount of energy saved I don't think is worth the effort just in the context of lamp use, especially when mechanics and light suitability are also taken into account, and in comparison with other energy saving measures, it's really not worth bothering. IMHO the energy saved is over stated, in the UK for at least 6 months of the year the energy "wasted" goes towards heating the house , okay its expensive but not totaly wasted. I have to yet to find any figures for total life energy comparisons between standard tungsten and low-energy bulbs. LE bulbs must take more energy to manufacture (and dispose of), it may not be significant but I would like to see the figures. I've not been a big fan of the LE bulbs in the past but as I am installing new lights at present in a largish house I was pleasantly surprised at the number and quality of design of LE light fittings now available . Worthwhile for hall and landing lights at least. Robert |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 18:11:45 +0000, Andy Hall
wrote: On 2007-01-18 17:22:09 +0000, T i m said: On Thu, 18 Jan 2007 10:12:43 +0000, Andy Hall wrote: I haven't yet found any low energy lamps that I would entertain having in the house. I find the light quality poor and colour rendition obtained distinctly artificial looking and strange to the point of having a bilious effect. I wonder what makes someone dislike the above so much whilst others can use them without any 'issues' Andy (genuine question). I know it's a genuine question. The genuine answer is that I find the light artificial and bilious. Strange, spose that's the same effect I get when I catch a bit of Contamination St, Deadenders, Big ****ter etc .. ;-) The minor cost savings, if any, are therefore irrelevant and the energy savings are not significant in the overall context of things that can be done. Understood. *We* have done nearly all the things we could do re energy saving (for our own cost saving if nothing else) so the laps are just part of the package for us. I do know I have a few 'spare' CFL's but the stock doesn't seem to have gone down for ages .. When the 'fossils' do run out how will you cope with candle light or yer solar charged LED light Andy ;-) I don't buy into the argument that says that energy in the form of electricity needs to be saved. Possibly but I believe even you wouldn't *choose* to squander it? Replacing perfectly good technology in the form of tungsten lighting which most people do seem to prefer based on sales volumes really makes no sense; Erm, well I like the fact that CFL's run cooler so less chance getting burnt touching one or it melting something? Also CFL's don't seem to fail as suddenly as filament so that could be another safety consideration? and when one learns that there is government sponsored coercion in terms of forcing the issue via building regulation, it is very clear that there is a rat. I don't know about any conspiracy theories but I wouldn't be surprised .... ;-( If one were to say that use of fossil fuel were the *only* way to produce electricity then that would make it a discussion point. Well I think that's where we are atm so it might make more sense to do it now rather than later? *If* we all switched to CFL's now don't they suggest they could close down an existing power station (or not build a new one)? Would I be right to guess even you might see that as a good thing Andy (especially if it was in your back yard)? Aren't they doing similar with traffic lights .. converting them to LED? Less visits by engineers to change lamps (so a lower carbon long-term cost), less energy used (cheaper for the local council / your taxes etc)? Not that we will ever see a reduction of course ;-( Focus should be on alternative sources of supply for electricity such as nuclear fission and ultimately fusion generation and improving the technology around those further. Agreed, but in the meantime .. Instead of this, we are presented with a "no gain without pain" argument which really holds no water at all; and which in effect, is very similar to the ancient practice of self flagellation as atonement for sin. I'm not really motivated by any external influences .. I chose to buy / fit / use CFL's when a basic one was £15 and because I mark them with installation date know how much money they have saved me over filament in their lives. Money I can spend on more interesting things like beer or toys ;-) If people want to buy these things and use them and if it makes them feel good, then that's fine. I don't feel about to follow suit because I find the aesthetics poor and the technical and ecological justifications questionable at best. Fair enough .. As soon as the element of government compulsion comes into the mix with these weak justifications, I close the shutters. Well, I agree that might be taking things a bit too far .. less they really have done their sums and have proven it does all add up? p.s. I saw CFL based floodlight the other day .. I'm keeping my eye out for one locally as the 300W flood lamp that covered the back garden failed about 2 years ago ... One exterior application is the only one that I have found as an appropriate use for a CFL. I have a lantern outside which illuminates an area where the dustbins are stores. This is switched on only when I need to go out after dark to put rubbish in the bins and is switched off again afterwards. Similarly those folk who have 4-6 filament lamps lighting up their front garden / car park. Another ideal role for CFL (If they really must light pollute in the first place that is)? I don't care about the light quality for that but it is inconvenient to access the lantern to change a tungsten bulb. Understood and thanks for your replies. All the best .. T i m |
Low energy light bulbs - comparison
On 2007-01-18 19:06:49 +0000, T i m said:
On Thu, 18 Jan 2007 18:11:45 +0000, Andy Hall wrote: On 2007-01-18 17:22:09 +0000, T i m said: On Thu, 18 Jan 2007 10:12:43 +0000, Andy Hall wrote: I haven't yet found any low energy lamps that I would entertain having in the house. I find the light quality poor and colour rendition obtained distinctly artificial looking and strange to the point of having a bilious effect. I wonder what makes someone dislike the above so much whilst others can use them without any 'issues' Andy (genuine question). I know it's a genuine question. The genuine answer is that I find the light artificial and bilious. Strange, spose that's the same effect I get when I catch a bit of Contamination St, Deadenders, Big ****ter etc .. ;-) You sure it isn't the CFL in the lounge? The minor cost savings, if any, are therefore irrelevant and the energy savings are not significant in the overall context of things that can be done. Understood. *We* have done nearly all the things we could do re energy saving (for our own cost saving if nothing else) so the laps are just part of the package for us. I do know I have a few 'spare' CFL's but the stock doesn't seem to have gone down for ages .. When the 'fossils' do run out how will you cope with candle light or yer solar charged LED light Andy ;-) I don't buy into the argument that says that energy in the form of electricity needs to be saved. Possibly but I believe even you wouldn't *choose* to squander it? I'm not particularly, because it is relatively expensive. However, when one considers the pattern of usage, it becomes less and less expensive. For example, lighting is predominantly used during the shorter days of the winter, when heating is also generally required. Therefore, in effect, one has added some electric heating to supplement what is being provided by gas, oil or possibly electricity. I don't hear much argument, other than on cost grounds, about using fan heaters, storage heaters or other forms of electric heating. Seldom, if ever, does one hear an ecological argument about that. Yet, in using conventional bulbs, that is the equivalent to what is being done with these. We therefore have a weak ecological argument, possibly a slightly stronger cost one and that's about it. Replacing perfectly good technology in the form of tungsten lighting which most people do seem to prefer based on sales volumes really makes no sense; Erm, well I like the fact that CFL's run cooler so less chance getting burnt touching one or it melting something? Also CFL's don't seem to fail as suddenly as filament so that could be another safety consideration? Ok... but I think that that is clutching at straws somewhat. and when one learns that there is government sponsored coercion in terms of forcing the issue via building regulation, it is very clear that there is a rat. I don't know about any conspiracy theories but I wouldn't be surprised ... ;-( Governments. Opportunity to control. There's a rat. If one were to say that use of fossil fuel were the *only* way to produce electricity then that would make it a discussion point. Well I think that's where we are atm so it might make more sense to do it now rather than later? *If* we all switched to CFL's now don't they suggest they could close down an existing power station (or not build a new one)? Would I be right to guess even you might see that as a good thing Andy (especially if it was in your back yard)? I don't buy that one either for a number of reasons. It would be desirable to reduce the amount of coal burning electricity generation. However, when one sets it in a global context, this is irrelevant. The Chinese are opening a new coal fired station each week. Rate of fossil fuel depletion is not going to be assisted by this and CO2 emission and alleged global warming are not localised over Beijing. Aren't they doing similar with traffic lights .. converting them to LED? Less visits by engineers to change lamps (so a lower carbon long-term cost), less energy used (cheaper for the local council / your taxes etc)? Not that we will ever see a reduction of course ;-( I would buy the cheaper maintenance argument as a possible real motivator. I would take the rest as PC marketing. Focus should be on alternative sources of supply for electricity such as nuclear fission and ultimately fusion generation and improving the technology around those further. Agreed, but in the meantime .. In the meantime start building and pay attention to what to do about the significant contributors - and I don't mean the airline industry. Instead of this, we are presented with a "no gain without pain" argument which really holds no water at all; and which in effect, is very similar to the ancient practice of self flagellation as atonement for sin. I'm not really motivated by any external influences .. I chose to buy / fit / use CFL's when a basic one was £15 and because I mark them with installation date know how much money they have saved me over filament in their lives. Money I can spend on more interesting things like beer or toys ;-) That's a reasonable argument if it works for you. If people want to buy these things and use them and if it makes them feel good, then that's fine. I don't feel about to follow suit because I find the aesthetics poor and the technical and ecological justifications questionable at best. Fair enough .. As soon as the element of government compulsion comes into the mix with these weak justifications, I close the shutters. Well, I agree that might be taking things a bit too far .. less they really have done their sums and have proven it does all add up? I haven't seen an honest and convincing case that takes all or at least the most significant factors into account. p.s. I saw CFL based floodlight the other day .. I'm keeping my eye out for one locally as the 300W flood lamp that covered the back garden failed about 2 years ago ... One exterior application is the only one that I have found as an appropriate use for a CFL. I have a lantern outside which illuminates an area where the dustbins are stores. This is switched on only when I need to go out after dark to put rubbish in the bins and is switched off again afterwards. Similarly those folk who have 4-6 filament lamps lighting up their front garden / car park. Another ideal role for CFL (If they really must light pollute in the first place that is)? Yes. I don't think that either is necessary. There is way too much light pollution as it is. When one has looked at the night sky in the very north of Sweden or in the middle of nowhere in southern Africa, northern and central Europe are very disappointing in comparison. I don't care about the light quality for that but it is inconvenient to access the lantern to change a tungsten bulb. Understood and thanks for your replies. All the best .. T i m |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 18:32:12 +0000 wrote :
IMHO the energy saved is over stated, in the UK for at least 6 months of the year the energy "wasted" goes towards heating the house, okay its expensive but not totaly wasted. True, but more of concern now (as far as Building Regs etc is concerned) is that in most cases you are displacing a lower CO2 fuel (gas) with a higher CO2 one (electricity). -- Tony Bryer SDA UK 'Software to build on' http://www.sda.co.uk |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 17:49:27 +0000 someone who may be Andy Hall
wrote this:- Absolutely agree. This is just a sop for people to think that they are doing something, Nice try, but your arguments remain as unconvincing as ever. done as a diversion from the real issues that actually do make a difference but which are considered to be too hard. If energy saving light bulbs were the only thing people are being encouraged to do you would have a point. However, they are not the only thing people are being encouraged to do. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 17:51:29 +0000 someone who may be Andy Hall
wrote this:- You salve your conscience if you are gullible enough to be taken in by the hype surrounding all of this. Yawn. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
On 2007-01-18 20:25:56 +0000, David Hansen
said: On Thu, 18 Jan 2007 17:49:27 +0000 someone who may be Andy Hall wrote this:- Absolutely agree. This is just a sop for people to think that they are doing something, Nice try, but your arguments remain as unconvincing as ever. I'm not setting out to convince anyone. done as a diversion from the real issues that actually do make a difference but which are considered to be too hard. If energy saving light bulbs were the only thing people are being encouraged to do you would have a point. However, they are not the only thing people are being encouraged to do. ... and your point is? |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 17:22:09 GMT someone who may be T i m
wrote this:- p.s. I saw CFL based floodlight the other day .. I'm keeping my eye out for one locally as the 300W flood lamp that covered the back garden failed about 2 years ago ... They have been around for 5-10 years. They generally take three PL type bulbs. Probably not as much light from one as a 300W linear halogen light, but plenty of light for most tasks. Whether one should leave such lights on for a long period is another matter... -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
Low energy light bulbs - comparison
On 2007-01-18 20:24:15 +0000, Tony Bryer said:
On Thu, 18 Jan 2007 18:32:12 +0000 wrote : IMHO the energy saved is over stated, in the UK for at least 6 months of the year the energy "wasted" goes towards heating the house, okay its expensive but not totaly wasted. True, but more of concern now (as far as Building Regs etc is concerned) is that in most cases you are displacing a lower CO2 fuel (gas) with a higher CO2 one (electricity). OK, understandable point although this doesn't have to be the case. Even so, one wonders why there is not similar regulatory discouragement in terms of provision for electric space heating and cooking in new houses if there are alternatives available at a site. Either one of those would make a far bigger difference. |
Low energy light bulbs - comparison
On Thu, 18 Jan 2007 18:11:45 +0000, Andy Hall wrote:
Replacing perfectly good technology in the form of tungsten lighting which most people do seem to prefer based on sales volumes Er, "sales volumes" is a false measure unless corrected to take into account the much longer life of CFLs over tungsten. I was buying and getting through 16 or so 40W tugnsten candle bulbs for the lounge lights a year until I replaced them with 6 CFLs. I have yet to replace those CFLs and they have been in for at least two years alomost certainly longer... If people want to buy these things and use them and if it makes them feel good, then that's fine. I quite like the extra cash in my pocket. Tungsten 6 x 40 x 18 = 4.32units/day. 6 * 9 * 18 = 0.972 units/day. Saving 3.348 units at 7.191p/unit, 24p/day, 92 quid/year (once you've added the VAT) or a weeks groceries. -- Cheers Dave. pam is missing e-mail |
All times are GMT +1. The time now is 02:06 PM. |
|
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter