I'm adding a zone to my S-plan system. The most convenient place to put
the zone is some way from the airing cupboard and controls, so I need to
replace the wire with something longer...

I'm assuming that this is suitable - 0.5mm 5 core heat resistant.

http://www.tlc-direct.co.uk/Products/CA0dot5HR5.html

Fairly sure it is, but just thought I'd check there isn't something even
more suitable...

Ben

On Tue, 16 Jan 2007 19:48:17 +0000, Ben Blaukopf wrote:

I'm adding a zone to my S-plan system. The most convenient place to put
the zone is some way from the airing cupboard and controls, so I need to
replace the wire with something longer...

I'm assuming that this is suitable - 0.5mm 5 core heat resistant.

http://www.tlc-direct.co.uk/Products/CA0dot5HR5.html

Fairly sure it is, but just thought I'd check there isn't something even
more suitable...


I think that would do the job. I keep 6 core in stock. I think this covers
me for the worst case.

Boiler (L, N, E, Demand live, PUMP L & N)
or
Zone valve with change over contact (so six wires incl Earth).


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html
Gas Fitting Standards Docs he http://www.makewrite.demon.co.uk/GasFittingStandards