Hello,

Does anyone know a supplier of neoprene tubing in North/North West
London? - looking for a 2 metre length of 5 or 6mm ID.

TIA

Nobody wrote:

Does anyone know a supplier of neoprene tubing in North/North West
London? - looking for a 2 metre length of 5 or 6mm ID.

For a particular use ?

You could try model/hobby shops, medical/lab suppliers, or even
homebrew suppliers, for a choice of neoprene, silicone or probably
polythene.

--
"Press any key to continue, press any other key to cancel."

Does anyone know a supplier of neoprene tubing in North/North West
London? - looking for a 2 metre length of 5 or 6mm ID.

Something like this do ? - they cut lengths to order

http://www.birchvalley.co.uk/index.htm

Does it have to be neoprene? I only ask as Scuba Diving shops [the good
ones] are a ready source of silicon rubber tubing. Divers use it for
attaching regs and stuff. Just ask for Bungie [well that's what we call
it int north] HTH


--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG

On 4 Jan 2007 14:32:34 -0800, "John Laird" wrote:

Nobody wrote:

Does anyone know a supplier of neoprene tubing in North/North West
London? - looking for a 2 metre length of 5 or 6mm ID.

For a particular use ?

You could try model/hobby shops, medical/lab suppliers, or even
homebrew suppliers, for a choice of neoprene, silicone or probably
polythene.

A couple of hobby shops I knew have closed and DIY/Plumbers suppliers
just draw a blank :-(( I found some online places but not local to
me.

On Thu, 04 Jan 2007 21:45:45 +0000, Nobody
wrote:

thanks for the suggestions

Nobody wrote:
Hello,

Does anyone know a supplier of neoprene tubing in North/North West
London? - looking for a 2 metre length of 5 or 6mm ID.

TIA

Although not the cheapest place (£50 min order), Watson Marlow sell this, RS
stock certain lines of WM's range which IIRC include Silicon and Marprene
variants (no min order value)

Jon

On Thu, 04 Jan 2007 14:32:34 -0800, John Laird wrote:

Nobody wrote:

Does anyone know a supplier of neoprene tubing in North/North West
London? - looking for a 2 metre length of 5 or 6mm ID.

For a particular use ?

You could try model/hobby shops, medical/lab suppliers, or even
homebrew suppliers, for a choice of neoprene, silicone or probably
polythene.


Gas gauge tubing is about 7mm OD and about 4mm ID. But easily stretches to
5/6 mm ID.
Most real plumbers' merchants will sell you a length.

Try: Builder Depot, N11. Peter's Plumbing N11, Plumb Online.net N10
WMI Simpson N12, BJM at Staples Corner.




--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html
Gas Fitting Standards Docs he http://www.makewrite.demon.co.uk/GasFittingStandards

On Fri, 5 Jan 2007 12:21:45 +0000 (UTC), Ed Sirett
wrote:

Thanks Ed.

Best regards.