 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Flashing leak
I've just redone the flashing seal with the brickwork on my flat bay window
roof. The depth inserted is about 15mm so a bit less than recommended. I've directed a hose at highish pressure along the joint for a few minutes, but it still leaks. I've simulated I guess an attrocious storm but that's not really acceptable I don't think. Can I treat the mortar I've applied with some silicon treatment to reduce ingress further? Or what? TIA, Mike W |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Do I need through wall flashing where roof interests stone wall? | Home Repair | |||
| To Ricodjove & tbasc: More On My Z Flashing Question, Please ? | Home Repair | |||
| Water leak - the saga continues..... | UK diy | |||
| Story & Info: Slab leak pipe repair Melbourne FL Brevard Co | Home Repair | |||
| Mystery Bathroom Leak | Home Repair | |||
Threaded Mode
