Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
Hi,
Ive just ordered a shed (3m by 3m) and so need to lay a base for it. I live in a little terraced house with no rear access so everything has to come through the house. I've a flat lawn so have removed a little over 3m by 3m of turf. I had to move a flowerbed so the level of the base is a little higher than the surrounding lawn. I saw 25 paving slabs (60cm by 60cm) for a quid each so I bought them all - they are heavy duty slabs. I was planning on leveling the soil, laying some landscaping net to stop weeds and the like, then laying sand and then laying the slabs on top of the sand. I was going to hire a compacting tool to try to stop sinking etc. So to the question, should I lower the base so it is beneath the surface of the lawn so that the slabs are a little proud of it for the final product? I've got loads of pebbles so how about using pebbles instead of sand and laying the slabs on them? the garden is pretty well drained. Once Id put the slabs down I was going to put some 50mm by 75mm bearers across them to take the weight of the shed..... Help me please!!! cant decide what to do. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lathe Bench Base Configurations Question | Woodturning | |||
How do I seal metal shed base? | UK diy | |||
Shed Electrics | UK diy | |||
to break up existing concrete base or not for the new shed? | UK diy | |||
Porter Cable 690 router mounted to TS extension, do I use plunge base or standard | Woodworking |