New boiler flue location
Hi
I need to get a new boiler installed. I will be getting a condensing combi boiler and I want to relocate it to the cellar. The problem I have is getting the flue out. The best place would mean the flue exiting the cellar less than 300mm from the ground which is, apparently, against the regs. Is it possible\allowed to have the flue exit the house close to the ground but then have a 90 degree elbow to take the flue and air intake up the wall to an acceptable height - perhaps even to the eaves? I have looked at the Vaillant ecoTec boiler flue options and they appear to have these elbow fittings and extension tubes. Thanks Mike |
New boiler flue location
|
New boiler flue location
|
New boiler flue location
|
New boiler flue location
wrote:
just ensure that cellar is not airtight as the burner has to breathe air in. I doubt that you can get any modern condensing boilers that are not also room sealed (i.e. balanced flue). -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
New boiler flue location
Is it possible\allowed to have the flue exit the house close to
the ground but then have a 90 degree elbow to take the flue and air intake up the wall to an acceptable height - perhaps even to the eaves? No problem. In fact, it is often only possible with a condensing boiler, as the flue operates at such a low temperature. You may have trouble getting rid of the condensate in a cellar installation. Consider a condensate pump, such as a Sanicondens, to pump it away to the drain. Do not accept the condensate just dripping onto the ground, like most cowboy installers would have you believe is acceptable. Christian. |
New boiler flue location
Hi
Thanks Christian I have a drain in the cellar so that sholdn't be too much of a problem. Mike Christian McArdle wrote: Is it possible\allowed to have the flue exit the house close to the ground but then have a 90 degree elbow to take the flue and air intake up the wall to an acceptable height - perhaps even to the eaves? No problem. In fact, it is often only possible with a condensing boiler, as the flue operates at such a low temperature. You may have trouble getting rid of the condensate in a cellar installation. Consider a condensate pump, such as a Sanicondens, to pump it away to the drain. Do not accept the condensate just dripping onto the ground, like most cowboy installers would have you believe is acceptable. Christian. |
New boiler flue location
Hi
thank you all for your help. Cheers Mike John Rumm wrote: wrote: just ensure that cellar is not airtight as the burner has to breathe air in. I doubt that you can get any modern condensing boilers that are not also room sealed (i.e. balanced flue). -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
New boiler flue location
|
All times are GMT +1. The time now is 04:02 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter