Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
How to cut Edwardian door to fit glass panel?
Hi, We've got some original 4 panel doors in our Edwardian house.
In order to get a little more light into our kitchen I'd like to remove the top two wooden panels from a door which leads from our kitchen to our utility area. I'm not quite sure how to remove the wooden panels as they were fitted when the door was made and are held in place by the thicker boards which make up the remainder of the door.These boards taper inwards to the panels and it is this tapered bit I need to saw to fit the glass and keep in place with putty or some other bits of wood. I'm assuming I'll have to use a circular saw though I don't actually own one and have never used one. Is this going to be easy to saw or should I be using some other tool. As I will also have to purchase 2 panes of toughened glass (along with the circular saw (£20-£40 ish ?)) it's not going to be a cheap task and I did consider buying a door with glass fitted from wickes/homebase etc which cost £50ish. However as my door is at least 3 inches shorter and narrower than the standard size I don't think that's feasible. Any advice? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tempered fireplace glass explodes | Home Repair | |||
Windows | Home Repair | |||
OT - Global Warming (Was "Lying Liberals.") | Metalworking | |||
bow fronted glass panel cabinet | Woodworking | |||
Since I don't have any plans...whatsa best way to secure desk's back panel to side panels? (and other questions) | Woodworking |