Ladder stand-off?
 

Need to rake out some birdnest rubbish from under a tile three rows up from the
gutter. I would prefer to have some ladder extending above the gutter for this
job.
Looked at standoffs - screwfix 10275-81
http://tinyurl.com/fcjz6

and this one (with wheels):-
http://www.tool-net.co.uk/data/index.php?ToolID=315003

But they seem to only stand off about 350mm (14") so that with the slope of the
ladder, it might not get past the soffit (about 9") + gutter(??) - or would they
work in practice?


Geo

Ladder stand-off?
 

Geo wrote:
Need to rake out some birdnest rubbish from under a tile three rows
up from the gutter. I would prefer to have some ladder extending
above the gutter for this job.
Looked at standoffs - screwfix 10275-81
http://tinyurl.com/fcjz6

and this one (with wheels):-
http://www.tool-net.co.uk/data/index.php?ToolID=315003

But they seem to only stand off about 350mm (14") so that with the
slope of the ladder, it might not get past the soffit (about 9") +
gutter(??) - or would they work in practice?


Geo

So make your own..3/4" steel piping and a borrowed pipe bender,weld a flat
piece of metal to the tube,drill 2 holes in flat piece of metal for
nut&bolts to go through ladder and flat metal.

--
Sir Benjamin Middlethwaite

Ladder stand-off?
 

Geo wrote:
Need to rake out some birdnest rubbish from under a tile three rows up from the
gutter. I would prefer to have some ladder extending above the gutter for this
job.
Looked at standoffs - screwfix 10275-81
http://tinyurl.com/fcjz6

and this one (with wheels):-
http://www.tool-net.co.uk/data/index.php?ToolID=315003

But they seem to only stand off about 350mm (14") so that with the slope of the
ladder, it might not get past the soffit (about 9") + gutter(??) - or would they
work in practice?

I don't like the look of that thing with wheels on. I've got the
Screwfix "Superior standoff" which is excellent - well worth the extra
fiver. It's very stable, and comfortable to use; has a large tray you
can put stuff on while you're working.

Can't comment on the dimensions you've quoted, but my ladder certainly
comfortably clears my soffits when I've got the standoff on.

David

Ladder stand-off?
 

Lobster wrote:
Can't comment on the dimensions you've quoted, but my ladder certainly
comfortably clears my soffits when I've got the standoff on.

This is uk.d-i-y, not uk.sex-up-ladders!

Ladder stand-off?
 

The message
from "The3rd Earl Of Derby" contains these words:

a borrowed pipe bender

Talking of which, anyone near Telford willing to let me use their
pipe-bender for half an hour in exchange for a pint or two? I need four
bends in a bit of 2" pipe.

--
Skipweasel
Pay no attention to that man behind the curtain.

Ladder stand-off?
 

"Geo" wrote in message
...
Need to rake out some birdnest rubbish from under a tile three rows up
from the
gutter. I would prefer to have some ladder extending above the gutter for
this
job.
Looked at standoffs - screwfix 10275-81
http://tinyurl.com/fcjz6

and this one (with wheels):-
http://www.tool-net.co.uk/data/index.php?ToolID=315003

But they seem to only stand off about 350mm (14") so that with the slope
of the
ladder, it might not get past the soffit (about 9") + gutter(??) - or
would they
work in practice?

the Screwfix Superior standoff

http://www.screwfix.com/app/sfd/cat/...98697&id=32096

is 570mm (less angle of ladder, do the maths if necessary) from the wall.
Very stable, securely fixed and not too heavy an object dangling at the end
of the ladder.

Jim A

Ladder stand-off?
 

Guy King wrote:
The message
from "The3rd Earl Of Derby" contains these words:

a borrowed pipe bender

Talking of which, anyone near Telford willing to let me use their
pipe-bender for half an hour in exchange for a pint or two? I need
four bends in a bit of 2" pipe.

Four bends in a 2" bit of pipe, impossible!! :-P

2" circu.

--
Sir Benjamin Middlethwaite

Ladder stand-off?
 

The message
from "The3rd Earl Of Derby" contains these words:

Talking of which, anyone near Telford willing to let me use their
pipe-bender for half an hour in exchange for a pint or two? I need
four bends in a bit of 2" pipe.

Four bends in a 2" bit of pipe, impossible!! :-P

It might be very narrow pipe!

Anyway, I want it to make the perimeter for my new garden gate, which,
when I get the sufficient tuits will look like this
http://www.skipweasel.pwp.blueyonder...mages/gate.gif
with the detail done with 2" x 3/8" steel strip bent to shape and welded
in. Not sure what to do about the eye at the moment, and it'd be fun if
I could get an ear to operate the latch.

--
Skipweasel
Pay no attention to that man behind the curtain.

Ladder stand-off?
 

The3rd Earl Of Derby wrote:

So make your own..3/4" steel piping and a borrowed pipe bender,weld a flat
piece of metal to the tube,drill 2 holes in flat piece of metal for
nut&bolts to go through ladder and flat metal.

For diy you can make your own from wood or metal in 10 minutes, any
size you want, adjustable if you want, with whatever features you want.
That is if you understand how to make it safely, no using london
brackets.


NT

Ladder stand-off?
 

Lobster wrote:
Geo wrote:

Need to rake out some birdnest rubbish from under a tile three rows
up from the gutter. I would prefer to have some ladder extending
above the gutter for this job.

I don't like the look of that thing with wheels on. I've got the
Screwfix "Superior standoff" which is excellent - well worth the
extra fiver. It's very stable, and comfortable to use; has a large
tray you can put stuff on while you're working.

Had a look at my "Superior Standoff" (oo-er, missus) today. When in
use, the front edge of the ladder will be held 545mm away from the wall,
measured at the top of the device. Also, it holds the ladder at 20 deg
from the vertical (that's fixed, assuming the tray is horizontal), so
Pythagoras should be able to enlighten you whether it will clear your
soffits.

Pics of it on the mfr's website at:
http://www.haxnicks.co.uk/direct/det...p?ProductID=32

David

Ladder stand-off?
 

On Thu, 18 May 2006 18:45:33 GMT, Lobster
wrote:

Had a look at my "Superior Standoff" (oo-er, missus) today. When in
use, the front edge of the ladder will be held 545mm away from the wall,
measured at the top of the device. Also, it holds the ladder at 20 deg
from the vertical (that's fixed, assuming the tray is horizontal), so
Pythagoras should be able to enlighten you whether it will clear your
soffits.

Pics of it on the mfr's website at:
http://www.haxnicks.co.uk/direct/det...p?ProductID=32

Thanks for the info - I think I am leaning (20deg) towards this model - the web
site shows more detail than the screwfix picture.
I have considered the suggestions about DIY construction but my attempts are
usually "over-engineered" 2 inch handy-angle contraptions and I dont fancy the
weight at the end of a 20 foot ladder.

Geo

Ladder stand-off?
 

Geo wrote:
On Thu, 18 May 2006 18:45:33 GMT, Lobster
wrote:


Had a look at my "Superior Standoff" (oo-er, missus) today. When in
use, the front edge of the ladder will be held 545mm away from the wall,
measured at the top of the device. Also, it holds the ladder at 20 deg

from the vertical (that's fixed, assuming the tray is horizontal), so

Pythagoras should be able to enlighten you whether it will clear your
soffits.

Pics of it on the mfr's website at:
http://www.haxnicks.co.uk/direct/det...p?ProductID=32


Thanks for the info - I think I am leaning (20deg) towards this model - the web
site shows more detail than the screwfix picture.
I have considered the suggestions about DIY construction but my attempts are
usually "over-engineered" 2 inch handy-angle contraptions and I dont fancy the
weight at the end of a 20 foot ladder.

Geo

Haven't been following this but I've used this one for years

http://www.laddersrus.co.uk/eshop/product.php?xProd=334

and prefer the fact that you're not locating off just 2 points which, on
an uneven surface, I don't fancy.

Ladder stand-off?
 

"Stuart Noble" wrote in message
...
Geo wrote:
On Thu, 18 May 2006 18:45:33 GMT, Lobster

wrote:


Had a look at my "Superior Standoff" (oo-er, missus) today. When in use,
the front edge of the ladder will be held 545mm away from the wall,
measured at the top of the device. Also, it holds the ladder at 20 deg

from the vertical (that's fixed, assuming the tray is horizontal), so

Pythagoras should be able to enlighten you whether it will clear your
soffits.

Pics of it on the mfr's website at:
http://www.haxnicks.co.uk/direct/det...p?ProductID=32


Thanks for the info - I think I am leaning (20deg) towards this model -
the web
site shows more detail than the screwfix picture.
I have considered the suggestions about DIY construction but my attempts
are
usually "over-engineered" 2 inch handy-angle contraptions and I dont
fancy the
weight at the end of a 20 foot ladder.

Geo

Haven't been following this but I've used this one for years

http://www.laddersrus.co.uk/eshop/product.php?xProd=334

and prefer the fact that you're not locating off just 2 points which, on
an uneven surface, I don't fancy.

except on an uneven surface there will only ever be two points of contact
and with that design the wall chooses where but with the Screwfix Superior
standoff the uneven points of contact are guaranteed to be 750mm apart.

Jim A

Ladder stand-off?
 

Jim Alexander wrote:
"Stuart Noble" wrote in message
...

Haven't been following this but I've used this one for years

http://www.laddersrus.co.uk/eshop/product.php?xProd=334

and prefer the fact that you're not locating off just 2 points which, on
an uneven surface, I don't fancy.


except on an uneven surface there will only ever be two points of contact
and with that design the wall chooses where but with the Screwfix Superior
standoff the uneven points of contact are guaranteed to be 750mm apart.

I'd agree. Surely with "Laddersrus" you have the potential for getting a
high point along the length of the support, so it could rock side to
side. The Superior has two large pads which sit flat against the wall,
making it extremely stable.

David

Ladder stand-off?
 

Lobster wrote:
Jim Alexander wrote:

"Stuart Noble" wrote in message
...


Haven't been following this but I've used this one for years

http://www.laddersrus.co.uk/eshop/product.php?xProd=334

and prefer the fact that you're not locating off just 2 points which,
on an uneven surface, I don't fancy.



except on an uneven surface there will only ever be two points of
contact and with that design the wall chooses where but with the
Screwfix Superior standoff the uneven points of contact are guaranteed
to be 750mm apart.


I'd agree. Surely with "Laddersrus" you have the potential for getting a
high point along the length of the support, so it could rock side to
side. The Superior has two large pads which sit flat against the wall,
making it extremely stable.

David

Of course. Makes sense.

Ladder stand-off?
 

We were somewhere around Barstow, on the edge of the desert, when the
drugs began to take hold. I remember Stuart Noble
saying something like:

Geo wrote:
On Thu, 18 May 2006 18:45:33 GMT, Lobster
wrote:


Had a look at my "Superior Standoff" (oo-er, missus) today. When in
use, the front edge of the ladder will be held 545mm away from the wall,
measured at the top of the device. Also, it holds the ladder at 20 deg

from the vertical (that's fixed, assuming the tray is horizontal), so

Pythagoras should be able to enlighten you whether it will clear your
soffits.

Pics of it on the mfr's website at:
http://www.haxnicks.co.uk/direct/det...p?ProductID=32


Thanks for the info - I think I am leaning (20deg) towards this model - the web
site shows more detail than the screwfix picture.
I have considered the suggestions about DIY construction but my attempts are
usually "over-engineered" 2 inch handy-angle contraptions and I dont fancy the
weight at the end of a 20 foot ladder.

Geo

Haven't been following this but I've used this one for years

http://www.laddersrus.co.uk/eshop/product.php?xProd=334

and prefer the fact that you're not locating off just 2 points which, on
an uneven surface, I don't fancy.

They don't supply seperately and 25ukp for a bit of bent metal? I should
coco.

This is another ripoff...
http://www.laddersrus.co.uk/eshop/pr...c0b16472b1f54b

.... and I wouldn't feel awfully happy about those rollers on it while I
was up it.

This geezer looks like he's just about to find out about see-saws the
hard way...

http://www.laddersrus.co.uk/eshop/pr...c0b16472b1f54b

--

Dave

Ladder stand-off?
 

Grimly Curmudgeon wrote:

Haven't been following this but I've used this one for years

http://www.laddersrus.co.uk/eshop/product.php?xProd=334


They don't supply seperately and 25ukp for a bit of bent metal? I should
coco.



They're in most of the sheds for less I think

Ladder stand-off?
 

We were somewhere around Barstow, on the edge of the desert, when the
drugs began to take hold. I remember Stuart Noble
saying something like:

http://www.laddersrus.co.uk/eshop/product.php?xProd=334


They don't supply seperately and 25ukp for a bit of bent metal? I should
coco.

They're in most of the sheds for less I think

For all that's in it anyway, I think I'll knock one up myself, as well
as a bottom steady.
--

Dave