How do I tell what bolt I need?
I have snapped a bolt (from a seat post on my bike) so need a
replacement but don't know what to get. Presumably the bolt length and shaft width and also information about the thread - how do I do find that out? Thanks, TC |
How do I tell what bolt I need?
"TC" wrote in message
oups.com... I have snapped a bolt (from a seat post on my bike) so need a replacement but don't know what to get. Presumably the bolt length and shaft width and also information about the thread - how do I do find that out? Thanks, TC From memory, bike seat bolts usually have a 6mm Allen key socket in their head. I'd guess that the thread would be M6, M7 or M8. The head is usually recessed into the clamp, which can make finding replacement bolts more tricky. You could try some local bike shops. They'll have a few shiny new bolts in blister packs on display, but the smaller shops will probably have a box of miscellaneous bolts under the counter to rumage through. |
How do I tell what bolt I need?
The message .com
from "TC" contains these words: I have snapped a bolt (from a seat post on my bike) so need a replacement but don't know what to get. Presumably the bolt length and shaft width and also information about the thread - how do I do find that out? It's almost bound to be metric if it's a recentish bike. Probably 8mm. -- Skipweasel Pay no attention to that man behind the curtain. |
How do I tell what bolt I need?
Apparently its M5 x 40mm - I assume the threads are always the same.
Any recommendations for somewhere to get something strong on the web? Thanks |
How do I tell what bolt I need?
TC wrote:
I have snapped a bolt (from a seat post on my bike) so need a replacement but don't know what to get. Presumably the bolt length and shaft width and also information about the thread - how do I do find that out? "Ask at a cycling shop". |
How do I tell what bolt I need?
Guy King wrote:
The message from "TC" contains these words: I have snapped a bolt (from a seat post on my bike) so need a replacement but don't know what to get. It's almost bound to be metric if it's a recentish bike. Probably 8mm. "Probably ISO 8mm fine". HTH. |
How do I tell what bolt I need?
TC wrote:
Apparently its M5 x 40mm - I assume the threads are always the same. Any recommendations for somewhere to get something strong on the web? I thought it was "a bolt (from a seat post..)". Have you got a tandem? What bolt *exactly* is it? Why don't you spend 40p at a bicycle shop, or try your luck at an ironmongers? |
How do I tell what bolt I need?
In message .com, TC
writes Apparently its M5 x 40mm - I assume the threads are always the same. Any recommendations for somewhere to get something strong on the web? A single bolt via the web doesn't sound like it makes much sense unless you are out in the sticks somewhat. a local bike shop really is the obvious place - note that the heads on seat post clamp bolts are a sort of lower profile than your average Allen headed bolt, and some have shoulders on the body of the bolt etc. St John Street cycles are good for odd bits/spares, but aren't cheap, and have (or did anyway) a fairly hefty minimum postage charge http://www.sjscycles.com/ -- Chris French |
How do I tell what bolt I need?
In article .com,
TC wrote: Apparently its M5 x 40mm - I assume the threads are always the same. No - different number of threads per mm for different apps. And I'd guess your app will use an uncommon one since it has to clamp hard but easily. -- *Money isn't everything, but it sure keeps the kids in touch * Dave Plowman London SW To e-mail, change noise into sound. |
How do I tell what bolt I need?
TC wrote:
Apparently its M5 x 40mm - I assume the threads are always the same. Count 10 threads and measure that. 8mm=M5 Standard thread 5mm=M5 Fine thread |
How do I tell what bolt I need?
The message .com
from "TC" contains these words: Apparently its M5 x 40mm 5mm seems very thin for a seatbolt. -- Skipweasel Pay no attention to that man behind the curtain. |
How do I tell what bolt I need?
"Guy King" wrote in message ... The message .com from "TC" contains these words: Apparently its M5 x 40mm 5mm seems very thin for a seatbolt. Perhaps that's why it broke. They're not normally something you break! |
How do I tell what bolt I need?
"TC" wrote in message oups.com... Apparently its M5 x 40mm - I assume the threads are always the same. Any recommendations for somewhere to get something strong on the web? Thanks don't you have a Halfords or a bike shop near you? |
All times are GMT +1. The time now is 11:41 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter