I am looking for a oil boiler to be installed in a semi on the Surrey /
Hants border near Hindhead but having difficulty finding anyone to do this -
I am quite prepared to do some of this myself if the installer is overloaded
/ unwilling to e.g. fit the radiators / pipes / oil tank base etc, but just
need the legal bits done/certified by someone.

Any recommended installers who cover this area ? - Know anyone Geoff ?

Thanks,

Nick

Nick wrote:
I am looking for a oil boiler to be installed in a semi on the Surrey /
Hants border near Hindhead but having difficulty finding anyone to do this -
I am quite prepared to do some of this myself if the installer is overloaded
/ unwilling to e.g. fit the radiators / pipes / oil tank base etc, but just
need the legal bits done/certified by someone.

Any recommended installers who cover this area ? - Know anyone Geoff ?

I don't know if the bloke who installed out boiler would go that far. He
is very good, but I think he's based at Winchester, I can mail details
if you like. Very reasonable on servicing costs BTW.

In message , Nick
writes
I am looking for a oil boiler to be installed in a semi on the Surrey /
Hants border near Hindhead but having difficulty finding anyone to do this -
I am quite prepared to do some of this myself if the installer is overloaded
/ unwilling to e.g. fit the radiators / pipes / oil tank base etc, but just
need the legal bits done/certified by someone.

Any recommended installers who cover this area ? - Know anyone Geoff ?

No idea with regard to oil

I'll ask around

--
geoff

"Nick" wrote in message
...
I am looking for a oil boiler to be installed in a semi on the Surrey /
Hants border near Hindhead but having difficulty finding anyone to do this -
I am quite prepared to do some of this myself if the installer is overloaded
/ unwilling to e.g. fit the radiators / pipes / oil tank base etc, but just
need the legal bits done/certified by someone.

Any recommended installers who cover this area ? - Know anyone Geoff ?

Worcester are offering free commissioning on some of their boilers - if that
helps!

http://www.worcester-bosch.co.uk/

--

Michael Chare

Michael Chare wrote:

Worcester are offering free commissioning on some of their boilers - if that
helps!

http://www.worcester-bosch.co.uk/

Grant did the same with our oil boiler - I installed it, they sent an
engineer to comission it.


--
Grunff

Any recommended installers who cover this area ? - Know anyone Geoff ?

No idea with regard to oil

I'll ask around

--
geoff

Hi Geoff,

Thanks,

Nick

In message , Nick writes

Any recommended installers who cover this area ? - Know anyone Geoff ?

No idea with regard to oil

I'll ask around

--
geoff

Hi Geoff,

I've just asked in diynot, where the first question was whether it was
professionally installed or not

--
geoff

replying to Nick, Kanapathy Ruban wrote:
I came across your posts. I am using a Hot Tap. The HotTap is one of the
best methods to be followed for these sort of things. HOT TAP is a simple
five minute operation that can be carried out by anyone at any time. Not
only has the HOT TAP been designed to drill into the system under full
working pressure, it has also been designed to prevent contamination from
the drilling process entering into the piping system. As the HOT TAP
starts to break through the surface of the extrusion, air pressure forces
all loose particles back through an exhaust chamber in the drills body
where they become trapped in a pleated filter. This process ensures that
no contamination enters the piping, maintaining the systems integrity.
Drills, cutters and a simpleÂ* maintenance kit are available to support
the unit.

--
posted from
http://www.homeownershub.com/uk-diy/...es-351158-.htm
using HomeOwnersHub's Web, RSS and Social Media Interface
to home and garden related groups

Seems you really don't understand the question pal

Jim K

Jim K wrote:
Seems you really don't understand the question pal

Jim K

Or that his answer is 7years late.

Just another clueless spammer (who forgot his spam link).

Tim