Neff oven timer problem
 

I have a Neff hot-air oven that has been working fine for 6 years,
except for the digital timer, which has started playing up. This unit
enables me to set length of time for cooking, and start/finish times,
aswell as beng a digital clock.
It's now hard to set the timing correctly, which requires me to press a
button and turn a knob, as the display jumps almost randomly as I turn
the knob. Once set, however, it counts the time correctly.
Can anyone suggest if this is a part that I can get and replace myself,
or is it an expensive call-out job? (And no, it's not under warranty)

Neff oven timer problem
 

"CharlieR" wrote in message
oups.com...
I have a Neff hot-air oven that has been working fine for 6 years,
except for the digital timer, which has started playing up. This unit
enables me to set length of time for cooking, and start/finish times,
aswell as beng a digital clock.
It's now hard to set the timing correctly, which requires me to press a
button and turn a knob, as the display jumps almost randomly as I turn
the knob. Once set, however, it counts the time correctly.
Can anyone suggest if this is a part that I can get and replace myself,
or is it an expensive call-out job? (And no, it's not under warranty)


I can't answer your point directly .... but I hope this helps ...
I too have a Neff oven similar to yours and was able to purchase a
replacement element from a 'Parts shop'.
The outfit stocked lots of parts for most(?) manufacturers' appliances.
I walked into the shop and the 'bloke' pulled out a 'Mechanical' exploded
parts diagram of the appliance which enabled me to both identify the part
(number) required and the 'how to get it out' path to dismantling. {
remantling, as Haynes' says is the reverse of dismantling ). The shop
assistant although _very helpful and knowledgeable_ were forbidden to show
me any wiring diagram. ['case yer elektikute yerself; we can't be liable.
Guv!]

I found the shop advertised in the 'yellow pages' amongst the 'Domestic
Appliance Repairs' section.

I walked in with 'a problem' and after asking, politely, 'Can you help me?'
.... walked out with the correct part.

--

Brian

Neff oven timer problem
 

In article .com,
CharlieR wrote:
I have a Neff hot-air oven that has been working fine for 6 years,
except for the digital timer, which has started playing up. This unit
enables me to set length of time for cooking, and start/finish times,
aswell as beng a digital clock.
It's now hard to set the timing correctly, which requires me to press a
button and turn a knob, as the display jumps almost randomly as I turn
the knob. Once set, however, it counts the time correctly.
Can anyone suggest if this is a part that I can get and replace myself,
or is it an expensive call-out job? (And no, it's not under warranty)

It sounds like the what I think is a shaft encoder (produces pulses when
rotated in either direction) is faulty or the pulses aren't being read.
I've got a Neff oven and microwave that uses the same system - but they're
both new and I haven't had need to see how they are constructed, and
hopefully for a long time yet which is why I bought them rather than
Baumatic. ;-)

All I can guess is that you strip it down and check for dry soldered
joints etc on the PCB. If the shaft encoder is a generic type you could
replace from the likes of RS components. But they are generally very
reliable so I'd look for a PCB problem first - as I said likely a dry
joint or two.

--
*Why do the two "sanction"s (noun and verb) mean opposites?*

Dave Plowman London SW
To e-mail, change noise into sound.

Neff oven timer problem
 

€œYou can only change the clock when no other clock function is active€�. You need to delete all other clock functions which is what I seem to be having troubles with. Can I just reset the entire oven?

--
For full context, visit https://www.homeownershub.com/uk-diy...em-345995-.htm

Neff oven timer problem
 

ted wrote

€œYou can only change the clock when no other clock function is active€�.
You need to delete all other clock functions which is what I seem to be
having troubles with. Can I just reset the entire oven?

Tad unlikely to see your question after 14 years.

--
For full context, visit
https://www.homeownershub.com/uk-diy...em-345995-.htm

UNBELIEVABLE: It's 16:18 am in Australia and the Senile Ozzietard has been out of Bed and TROLLING all NIGHT and all DAY long, yet AGAIN! ROTFLOL
 

On Sat, 13 Mar 2021 16:18:03 +1100, cantankerous trolling geezer Rodent
Speed, the auto-contradicting senile sociopath, blabbered, again:

FLUSH the trolling senile asshole's latest troll**** unread

16:18 in Australia??? And you have been up and trolling since 01:06, i.e.
ALL NIGHT long, ALL MORNING, and almost ALL DAY long, yet AGAIN! LOL

--
Norman Wells addressing trolling senile Rodent:
"Ah, the voice of scum speaks."
MID:

Neff oven timer problem
 

But you did, the benefits of starting a new thread are many and varied,
particularly on a completely broken interface like the on in Home owners
club.
Brian

--

This newsgroup posting comes to you directly from...
The Sofa of Brian Gaff...

Blind user, so no pictures please
Note this Signature is meaningless.!
"Rod Speed" wrote in message
...
ted wrote

"You can only change the clock when no other clock function is active".
You need to delete all other clock functions which is what I seem to be
having troubles with. Can I just reset the entire oven?

Tad unlikely to see your question after 14 years.

--
For full context, visit
https://www.homeownershub.com/uk-diy...em-345995-.htm