Are 'screws' available.
 

I'm looking for a screw type for my B&D jigsaw. the bit that holds the
blade in place. i have lost 1 of them and need to replace it. It's a
bit tricky with just 1.

The thread is like the screws used in electrical sockets, but what are
they called.

I took the remaining 1 to my local diy store who said they were machine
screws and not available.

Anyone know what they are called and where i can get them.

Many thanks.

Are 'screws' available.
 

On 12 Mar 2006 12:07:32 -0800, wrote:

I'm looking for a screw type for my B&D jigsaw. the bit that holds the
blade in place. i have lost 1 of them and need to replace it. It's a
bit tricky with just 1.

The thread is like the screws used in electrical sockets, but what are
they called.

I took the remaining 1 to my local diy store who said they were machine
screws and not available.

Anyone know what they are called and where i can get them.

Many thanks.


Grub screws?

Do they do up with a hexagonal (Allen) key?

It should be possible to buy a mixed pack from a model shop or
somewhere like that. I would think that the ones you need would be
M3 or M4 or something in that range.

Alternatively, call a B&D service centre and more than likely they'll
send you some for nothing.


--

..andy

Are 'screws' available.
 

Are 'screws' available.
 

On 12 Mar 2006 12:07:32 -0800, wrote:

|I'm looking for a screw type for my B&D jigsaw. the bit that holds the
|blade in place. i have lost 1 of them and need to replace it. It's a
|bit tricky with just 1.
|
|The thread is like the screws used in electrical sockets, but what are
|they called.
|
|I took the remaining 1 to my local diy store who said they were machine
|screws and not available.
|
|Anyone know what they are called and where i can get them.

Most towns have a place which sells Nuts and bolts to the Trade.
Walk past the "TRADE ONLY" notice, and they will have whatever you want.
They are very amiable.
--
Dave Fawthrop dave hyphenologist co uk
Freedom of Speech, Expression, Religion, and Democracy are
the keys to Civilization, together with legal acceptance of
Fundamental Human rights.

Are 'screws' available.
 

wrote:
I'm looking for a screw type for my B&D jigsaw. the bit that holds
the blade in place. i have lost 1 of them and need to replace it.
It's a bit tricky with just 1.

The thread is like the screws used in electrical sockets, but what are
they called.

I took the remaining 1 to my local diy store who said they were
machine screws and not available.

Anyone know what they are called and where i can get them.

Many thanks.

http://www.toolshopdirect.co.uk/part...Indoor/Jigsaws
--
Sir Benjamin Middlethwaite

Are 'screws' available.
 

wrote:

I'm looking for a screw type for my B&D jigsaw. the bit that holds the

Seems like a fair swap...

blade in place. i have lost 1 of them and need to replace it. It's a
bit tricky with just 1.

Oh, I see what you mean! ;-)

The thread is like the screws used in electrical sockets, but what are
they called.

I took the remaining 1 to my local diy store who said they were machine
screws and not available.

Well yes and no. They are machine screws - probably pan head slotted,
however theyare readily available. Homebase carry a few at huge price is
little blister packs. However Maplin may be a better bet:

http://www.maplin.co.uk/Search.aspx?...m3&sour ce=15

If you don't mind ordering then try www.cpc.co.uk


--
Cheers,

John.

/================================================== ===============\
| Internode Ltd - http://www.internode.co.uk |
|-----------------------------------------------------------------|
| John Rumm - john(at)internode(dot)co(dot)uk |
\================================================= ================/

Are 'screws' available.
 

thanks for the info guys. i will try maplins tomorrow.

Are 'screws' available.
 

wrote:
I'm looking for a screw type for my B&D jigsaw.

If you input the model No that should get you an exploded diagram which
will tell you what the proper name/No is then you can order them direct
from the manufacturer (probably a very expensive route to take), get the
name/specs of it and see if you can source it from one of the shed/have
one lying about .
http://www.blackanddeckerspares.com/
--
This post contains no hidden meanings, no implications and certainly no
hidden agendas so it should be taken at face value. The wrong words
may be used this is due to my limitations with the English language .

Are 'screws' available.
 

soup wrote:
wrote:

I'm looking for a screw type for my B&D jigsaw.

If you input the model No that should get you an exploded diagram which
will tell you what the proper name/No is then you can order them direct
from the manufacturer (probably a very expensive route to take), get the
name/specs of it and see if you can source it from one of the shed/have
one lying about .
http://www.blackanddeckerspares.com/

Depends - I've found B&D extremely helpful in the past: I contacted
their spares dept on the off-chance for a replacment handle for my
ancient Workmate bench/vice, and not only did they have one, they sent
it FOC.

david

Are 'screws' available.
 

On Sun, 12 Mar 2006 23:21:14 GMT, Lobster
wrote:

soup wrote:
wrote:

I'm looking for a screw type for my B&D jigsaw.

If you input the model No that should get you an exploded diagram which
will tell you what the proper name/No is then you can order them direct
from the manufacturer (probably a very expensive route to take), get the
name/specs of it and see if you can source it from one of the shed/have
one lying about .
http://www.blackanddeckerspares.com/

Depends - I've found B&D extremely helpful in the past: I contacted
their spares dept on the off-chance for a replacment handle for my
ancient Workmate bench/vice, and not only did they have one, they sent
it FOC.

Slightly OT, but speaking of helpful service departments, a few years
ago I was given a Marantz "Superscope" portable cassette recorder. I
contacted Marantz about the availability of a carrying strap for same,
and was promptly sent, entirely FOC, a strap and a service manual for
the machine, even though it had been out of production for quite a
while. Firms/companies like that deserve due support.

OK - it's old hat now using "analogue" and "compact cassettes", but it
does still work!

--
Frank Erskine

Are 'screws' available.
 

On Sun, 12 Mar 2006 23:48:35 UTC, Frank Erskine
wrote:

Slightly OT, but speaking of helpful service departments, a few years
ago I was given a Marantz "Superscope" portable cassette recorder. I
contacted Marantz about the availability of a carrying strap for same,
and was promptly sent, entirely FOC, a strap and a service manual for
the machine, even though it had been out of production for quite a
while. Firms/companies like that deserve due support.

I had the same experience with Quad. I asked for a user manual for the
33 and the 303, and was sent (by mistake) the service manuals. On
request, they sent the user manuals too.

I asked about sending the units back for servicing. They said 'pack in
original boxes', which I hadn't got. So they shipped me a pair of
original boxes with the right internal packing.

Incidentally, I laughed a little when the pre-amp came back. The little
'Quad' light had had the gold lettering rubbed off. They'd replaced it
FOC, which reminded me of the rumour that Wolseley did much the same
with their radiator badges..!

--
The information contained in this post is copyright the
poster, and specifically may not be published in, or used by
Avenue Supplies, http://avenuesupplies.co.uk

Are 'screws' available.
 

On 12 Mar 2006 23:57:00 GMT, "Bob Eager" wrote:

On Sun, 12 Mar 2006 23:48:35 UTC, Frank Erskine
wrote:

Slightly OT, but speaking of helpful service departments, a few years
ago I was given a Marantz "Superscope" portable cassette recorder. I
contacted Marantz about the availability of a carrying strap for same,
and was promptly sent, entirely FOC, a strap and a service manual for
the machine, even though it had been out of production for quite a
while. Firms/companies like that deserve due support.

I had the same experience with Quad. I asked for a user manual for the
33 and the 303, and was sent (by mistake) the service manuals. On
request, they sent the user manuals too.

I asked about sending the units back for servicing. They said 'pack in
original boxes', which I hadn't got. So they shipped me a pair of
original boxes with the right internal packing.

Incidentally, I laughed a little when the pre-amp came back. The little
'Quad' light had had the gold lettering rubbed off. They'd replaced it
FOC, which reminded me of the rumour that Wolseley did much the same
with their radiator badges..!


I had a similar experience with my 66/606 with Quad (not as iconic as
the 33/303)

This one has a system of buttons operating electronic switching to
select signal sources. After some years the unit developed a fault
where it would do this on its own. So I called them and spoke to the
service manager.

He took the serial number and said that they had occasionally seen a
bad joint on one of the gold pin connectors that join two of the
internal boards together. I was offered the option of having the
boxes sent and a free repair, or if I was able to, it was an easy one
anyway. They faxed me a diagram of the area and marked the specific
joint. One quick touch with a soldering iron and new solder and it
was fixed.


--

..andy

Are 'screws' available.
 

The problem is that now many people in the UK are so obsessed by price
that things like 'customer service' are no longer even considered. If
cheap, they buy - then moan endlessly in the newsgroups about shoddy
service.

--
-----------
Zoinks !
Another weekend b*ggered.
-----------

Are 'screws' available.
 

"Zoinks" ""bounce\"@kermit-the fr.org" wrote in message
...
The problem is that now many people in the UK are so obsessed by price
that things like 'customer service' are no longer even considered. If
cheap, they buy - then moan endlessly in the newsgroups about shoddy
service.

Many people go to Screwfix because of their service.

Are 'screws' available.
 

The message
from Zoinks ""bounce\"@kermit-the fr.org" contains these words:

The problem is that now many people in the UK are so obsessed by price
that things like 'customer service' are no longer even considered. If
cheap, they buy - then moan endlessly in the newsgroups about shoddy
service.

That's why I go to the local independant timber/builders' yard for most
stuff - the prices aren't that different but much better service.

--
Skipweasel
Pay no attention to the man behind the curtain.

Are 'screws' available.
 

Guy King wrote:
The message
from Zoinks ""bounce\"@kermit-the fr.org" contains these words:


The problem is that now many people in the UK are so obsessed by price
that things like 'customer service' are no longer even considered. If
cheap, they buy - then moan endlessly in the newsgroups about shoddy
service.

That's why I go to the local independant timber/builders' yard for most
stuff - the prices aren't that different but much better service.

Better service than what? I find that in many of those places I get
treatedlike something the cat threw up just because I'm not a tradesman,
which is why Screwfix et al get most of my custom, wherever possible.

Next port of call for me is generally Wickes; only after that do I start
tangling with the local trade outlets. In general.

David

Are 'screws' available.
 

"Owain" wrote in message
...
Doctor Drivel wrote:
Many people go to Screwfix because of their service.

Given the choice between Screwfix

...Owain. Owain, Owain we go
...he gives us info we don't want to know
...the info is so poor tis true
...so how does this garbage affect you?

...well take no heed of babble and drool
...as instantly you will recognise a fool

...instictively you will spy
...in newsgroups with DIY
...attempting wisdom the fools will try

...so be very watchful of what the fools say
...and don't give these half-wits the time of day