re replacing electric water heater filament
Wykes stock all the parts,( including spanner).And are quite cheap.
You may need to replace thermostat as well-just a bar,usually, which slides inside heating element fitting. Easy job-Hardest part removing element, as they usually take some unscrewing! If you can, get two of the giant ring spanners, to apply equal pressure-you don't want to tear the tank. Use directly applied heat, then cool down suddenly to break stubborn seal. Take your time-it will suddenly unscrew! ----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
re replacing electric water heater filament
If you can, get two of the giant ring spanners, to apply equal
pressure-you don't want to tear the tank. You are less likely to rupture the tank if it contains water. Unfortunately, the consequences of rupturing the tank are then higher! Christian. |
All times are GMT +1. The time now is 06:17 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter