DIYbanter

DIYbanter (https://www.diybanter.com/)
-   UK diy (https://www.diybanter.com/uk-diy/)
-   -   Knot-free skirting boards, door linings, cill boards and architraves (https://www.diybanter.com/uk-diy/148215-knot-free-skirting-boards-door-linings-cill-boards-architraves.html)

Cordless Crazy March 9th 06 11:04 AM

Knot-free skirting boards, door linings, cill boards and architraves
 
Where can I buy knot-free skirting boards, door linings, cill boards and architraves in soft wood, or is this not posible?

Am planning to varnish/stain it all to a similar medium oak colour to match the floor, without going to the extent of buying solid oak items (cost is one reason!). Plus I want it to match the stair handrail already fixed in sortwood.

I dont fancy a whole array of knots visible as you get from the typical gear from B&Q etc.

Any ideas, cheap sources in SE England/London or guidance?

Stuart Noble March 9th 06 07:05 PM

Knot-free skirting boards, door linings, cill boards and architraves
 
Cordless Crazy wrote:
Where can I buy knot-free skirting boards, door linings, cill boards and
architraves in soft wood, or is this not posible?

Am planning to varnish/stain it all to a similar medium oak colour to
match the floor, without going to the extent of buying solid oak items
(cost is one reason!). Plus I want it to match the stair handrail
already fixed in sortwood.

I dont fancy a whole array of knots visible as you get from the typical
gear from B&Q etc.

Any ideas, cheap sources in SE England/London or guidance?



Any decent timber merchant should have *relatively* (i.e. relative to
the sheds) knot free softwood and, with luck, you can lose the bigger
ones in the cutting.
Champions are not bad if you have a branch nearby.

Michael Chare March 9th 06 08:11 PM

Knot-free skirting boards, door linings, cill boards and architraves
 
"Stuart Noble" wrote in message
...
Cordless Crazy wrote:
Where can I buy knot-free skirting boards, door linings, cill boards and
architraves in soft wood, or is this not posible?

Am planning to varnish/stain it all to a similar medium oak colour to
match the floor, without going to the extent of buying solid oak items
(cost is one reason!). Plus I want it to match the stair handrail
already fixed in sortwood.

I dont fancy a whole array of knots visible as you get from the typical
gear from B&Q etc.

Any ideas, cheap sources in SE England/London or guidance?


Many timber merchants will let you select the bits you want to take.
(like buying vegetables in a super market!)


--

Michael Chare




Pete C March 9th 06 11:15 PM

Knot-free skirting boards, door linings, cill boards and architraves
 
On Thu, 9 Mar 2006 11:04:23 +0000, Cordless Crazy
wrote:


Where can I buy knot-free skirting boards, door linings, cill boards and
architraves in soft wood, or is this not posible?

Am planning to varnish/stain it all to a similar medium oak colour to
match the floor, without going to the extent of buying solid oak items
(cost is one reason!). Plus I want it to match the stair handrail
already fixed in sortwood.

I dont fancy a whole array of knots visible as you get from the typical
gear from B&Q etc.

Any ideas, cheap sources in SE England/London or guidance?


Hi,

Try a large timber merchant like Champion Timber:

http://www.championtimber.com/

cheers,
Pete.

Cordless Crazy March 10th 06 04:28 PM

Cheers Pete. My local champions was perfic!

fred March 10th 06 05:12 PM

Knot-free skirting boards, door linings, cill boards and architraves
 
In article , Cordless Crazy
writes

Pete C Wrote:
On Thu, 9 Mar 2006 11:04:23 +0000, Cordless Crazy
wrote:
Where can I buy knot-free skirting boards, door linings, cill boards

and
architraves in soft wood, or is this not posible?

Try a large timber merchant like Champion Timber:

http://www.championtimber.com/

cheers,
Pete.


Cheers Pete. My local champions was perfic!



--
Cordless Crazy

What did you ask for/ what did they give you ie what type or species?
--
fred
Plusnet - I hope you like vanilla

Pete C March 10th 06 09:39 PM

Knot-free skirting boards, door linings, cill boards and architraves
 
On Fri, 10 Mar 2006 16:28:34 +0000, Cordless Crazy
wrote:

http://www.championtimber.com/

cheers,
Pete.


Cheers Pete. My local champions was perfic!


Good! BTW there's some ramblings of mine on staining pine at the
following...:

http://groups.google.co.uk/group/uk.d-i-y/browse_frm/thread/3528a7749b80f96b/5d317a2c44f31317?lnk=st&rnum=7&hl=en#5d317a2c44f31 317
http://groups.google.co.uk/group/uk.d-i-y/browse_frm/thread/ccf67020495a8a3f/3d6ebcd73bf8c025?lnk=st&rnum=1&hl=en#3d6ebcd73bf8c 025

I'd use the back of the skirting etc to practice getting the match to
the floor right.

cheers,
Pete.

Cordless Crazy March 10th 06 10:56 PM

Quote:

Originally Posted by Pete C
On Fri, 10 Mar 2006 16:28:34 +0000, Cordless Crazy
wrote:

http://www.championtimber.com/

cheers,
Pete.


Cheers Pete. My local champions was perfic!


Good! BTW there's some ramblings of mine on staining pine at the
following...:

http://groups.google.co.uk/group/uk....7a2c44f31 317
http://groups.google.co.uk/group/uk....bcd73bf8c 025

I'd use the back of the skirting etc to practice getting the match to
the floor right.

cheers,
Pete.

Interesting reading Pete. Looks like this Sikkens stuff is the way to go!

BTW any advise on fixing the skirtings without screws? Am going to be Gripfilling the blighters to the wall by running beads down a couple of routed grooves on the back, formed by my circ saw (if it doesnt come pre-routed). I dont fancy making good any holes or screwheads and having them noticeable. My next concern it ensuring they stay bonded to the wall while Grippy cures.

Cordless Crazy March 10th 06 11:02 PM

Quote:

Originally Posted by fred

Fred,

Champions were sound as. Go to their website and view their massive range. Lengths, boards, insulation, decking, sheds, doors etc The quality of their softwood pine is way better the the B&Q crudy knotty stuff. Reasonable rates almost knot free (the occational 6mm knot) but otherwise unwarp, true and available in length up to 5m+. Best thing is you can give them a cutting list and they will cut it and deliver it for free within a 10 mile radius of the branch (a few located around the south east)

[email protected] March 11th 06 12:13 AM

Knot-free skirting boards, door linings, cill boards and architraves
 
Knot free is just about possible if you specify "unsorted" grades of
softwood i.e. what was in the old days sorted into 1st 2nd and 3rds.
But why would you want knot free anyway - knots are just a natural
feature of many timbers. There are knot free(ish) alternatives to
redwood such as pirana pine etc but they have other drawbacks.

cheers

Jacob


Dave Fawthrop March 11th 06 06:55 AM

Knot-free skirting boards, door linings, cill boards and architraves
 
On Thu, 9 Mar 2006 11:04:23 +0000, Cordless Crazy
wrote:

|
|Where can I buy knot-free skirting boards, door linings, cill boards and
|architraves in soft wood, or is this not posible?

The sheds sell stripwood, which is lots of short bits of wood with the
knots cut out and glued end to end with an extended VVVVVV sort of join.
You could buy that and form it into "skirting boards, door linings, cill
boards" yourself.
--
Dave Fawthrop dave hyphenologist co uk
Freedom of Speech, Expression, Religion, and Democracy are
the keys to Civilization, together with legal acceptance of
Fundamental Human rights.

Stuart Noble March 11th 06 10:57 AM

Knot-free skirting boards, door linings, cill boards and architraves
 
Dave Fawthrop wrote:
On Thu, 9 Mar 2006 11:04:23 +0000, Cordless Crazy
wrote:

|
|Where can I buy knot-free skirting boards, door linings, cill boards and
|architraves in soft wood, or is this not posible?

The sheds sell stripwood, which is lots of short bits of wood with the
knots cut out and glued end to end with an extended VVVVVV sort of join.
You could buy that and form it into "skirting boards, door linings, cill
boards" yourself.


With an 8ft length restriction though, and those laminated boards are
far from knot-free

Pete C March 12th 06 02:11 PM

Knot-free skirting boards, door linings, cill boards and architraves
 
On Fri, 10 Mar 2006 22:56:05 +0000, Cordless Crazy
wrote:

Interesting reading Pete. Looks like this Sikkens stuff is the way to
go!


It's one way to go, maybe others can add other ways...

One thing worth a mention, if using a water based stain it will raise
the grain some, for a smoother surface solvent based is better.

When using solvent based stain indoors, there needs to be plenty of
ventilation during the initial drying to stop the solvent smell
building up too much.

Here's a pic of some pine which I've used a fairly thin coat of Cetol
HLS 'Teak' on (it does look quite a bit lighter in reality though),
with some bare wood for comparison:

http://static.flickr.com/35/111028642_8296453dfa_b.jpg

Using more coats makes it darker, and maybe obscures the grain a
little. The finish comes out satin but isn't too glossy.

Another product that might be worth a look is Rustins Wood Gel, I've
no experience of it though.

cheers,
Pete.


All times are GMT +1. The time now is 05:11 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter