UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
 
Posts: n/a
Default Integral Garage Conversion Regulations

Im planning on converting my intergal garage into a study / computer
room.
I actually want to leave the garage door on (its a roller type) and
have about 3-4 feet of garage space, then a stud wall and then my study
behind it. Access to the study will be from my front hall.
I dont want to raise the floor so i would just have 1 or 2 steps down.

This means there will be no window, but i plan to have a lot of
lighting.

What UK regulations do i need to comply with if I am to do this
properly.

Currently my boiler and my electric meter is in the garage at the back.

Would ventilation be a problem?

Cheers

Doug

  #2   Report Post  
Posted to uk.d-i-y
Christian McArdle
 
Posts: n/a
Default Integral Garage Conversion Regulations

I actually want to leave the garage door on (its a roller type) and
have about 3-4 feet of garage space, then a stud wall and then my study
behind it. Access to the study will be from my front hall.
I dont want to raise the floor so i would just have 1 or 2 steps down.

This means there will be no window, but i plan to have a lot of
lighting.

What UK regulations do i need to comply with if I am to do this
properly.


You may need planning permission. You WILL need building control.

If you are doing it properly, the building control will probably require the
following:

1. Insulated and dampproofed floor (i.e. you will have to raise the floor).
2. Any door between study and the small garage space will need a step down
(or a barrier sticking up from the floor space).
3. You may need to insulate the walls.
4. The stud partition will need to be fire resistant. This will probably
mean sticking 2 layers of plasterboard on the garage side with staggered
joins. Any door to the garage will need to be a fire door with an
intumescent frame.
5. You may need to install ventilation, as there is no window.
6. You may need to consider fire escape routes, as there is no window.
7. The room will not be usable as a living room or bedroom, as there is no
window.

Currently my boiler and my electric meter is in the garage at the back.

Would ventilation be a problem?


This depends on whether the boiler is open flued or room sealed. Most modern
room sealed boilers require no ventilation from the house. An open flued
boiler with no ventilation will probably kill you.

You will need ventilation for the room anyway.

Christian.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Garage conversion Markoz12 UK diy 6 July 14th 05 12:46 AM
Garage conversion Simon UK diy 11 July 13th 05 09:10 AM
Problem with Sears 1/2 HP garage door opener going down Jay Home Repair 2 April 18th 04 05:44 PM
Building an Extension (Garage and Block Selection) Andrew Welham UK diy 12 January 3rd 04 10:12 AM
Bee Nest in Garage Leo Shea Home Ownership 13 June 26th 03 12:52 AM


All times are GMT +1. The time now is 03:26 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"