UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
David WE Roberts
 
Posts: n/a
Default Polycarbonate roofing and ventilation

Hi,

I am contemplating replacing the asbestos cement roofing on an outbuilding
(well, old garage behind the newer garage) with polycarbonate sheeting.

The roof is south facing and gets the sun all the year round, so I plan to
trap some in the winter and heat this area above the usual chilly
temperature. I could even channel some heat into the newer garage,
although at the moment it is a fine larder and wine store.

One issue - in the summer it is going to be an oven.
So I would like to have an opening window in the roof, to allow the heat
to escape during the summer days; much like a vent in a greenhouse, or one
of the opening roof lights in loft conversions or single storey pitched
roof extensions (or even conservatories).

So far I haven't found this kind of device in the polycarbonate sheeting
range.
Anyone know of such a thing, and where I might get it?

TIA
Dave R
  #2   Report Post  
Posted to uk.d-i-y
Lawrence Zarb
 
Posts: n/a
Default Polycarbonate roofing and ventilation

Check this out:


http://www.casupply.co.uk/cgi-bin/sh...21V P#a1_21VP


--
Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
  #3   Report Post  
Posted to uk.d-i-y
raden
 
Posts: n/a
Default Polycarbonate roofing and ventilation

In message lgate.org,
Lawrence Zarb writes
Check this out:


http://www.casupply.co.uk/cgi-bin/sh...%3a%2f%2fwww%2
ecasupply%2eco%2euk%2facatalog%2fsearch%2ehtml&WD =roof%20vent&PN=polycar
bonate_sheet_accessories%2ehtml%23a1_21VP#a1_21 VP

Won't load without cookies

Ah well, their potential loss, not mine

--
geoff
  #4   Report Post  
Posted to uk.d-i-y
David WE Roberts
 
Posts: n/a
Default Polycarbonate roofing and ventilation

On Mon, 26 Dec 2005 16:17:00 +0000, Lawrence Zarb wrote:

Check this out:


http://www.casupply.co.uk/cgi-bin/sh...21V P#a1_21VP


Thanks for that.
More or less what I was looking for.

Is it just me, or are the prices for this stuff a tad high? As far as I
can see this is a plastic frame; you cut out a piece from your
polycarbonate sheet, use it to glaze the window, and fit the frame back
into the polycarbonate sheet.

All this for about £120.

Does it really cost this much to make?

All the polycarbonate sheeting seems expensive; is this a true reflection
of the cost or is it being priced against glass?

Cheers

Dave R
  #5   Report Post  
Posted to uk.d-i-y
david lang
 
Posts: n/a
Default Polycarbonate roofing and ventilation

David WE Roberts wrote:

One issue - in the summer it is going to be an oven.


Yup it sure is!

So I would like to have an opening window in the roof, to allow the
heat to escape during the summer days; much like a vent in a
greenhouse, or one of the opening roof lights in loft conversions or
single storey pitched roof extensions (or even conservatories).


My Wickes off the shelf conservatory has exactly that, so they might sell
them.

Polycarb does make our conservatory very hot in summer, I'd suggest blinds
as well if you are going to spend much time in there.

Dave


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Galvanised roofing members - venting requirements ? [email protected] UK diy 3 November 8th 05 07:03 PM
Winter attic ventilation SailFan Home Repair 9 October 29th 05 09:37 PM
Roofing Flashing & Ventilation questions Jamie Smithi Home Ownership 2 April 15th 05 03:20 AM
Roofing Flashing & Ventilation questions Jamie Smithi Home Repair 2 April 14th 05 02:31 AM
Roofing and ventilation questions Todd W. Roat Home Repair 2 May 13th 04 04:31 PM


All times are GMT +1. The time now is 12:41 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"